greenplumn date 源码
greenplumn date 代码
文件路径：/src/backend/utils/adt/date.c
/*-------------------------------------------------------------------------
*
* date.c
* implements DATE and TIME data types specified in SQL standard
*
* Portions Copyright (c) 1996-2019, PostgreSQL Global Development Group
* Portions Copyright (c) 1994-5, Regents of the University of California
*
*
* IDENTIFICATION
* src/backend/utils/adt/date.c
*
*-------------------------------------------------------------------------
*/
#include "postgres.h"
#include <ctype.h>
#include <limits.h>
#include <float.h>
#include <time.h>
#include "access/xact.h"
#include "common/hashfn.h"
#include "libpq/pqformat.h"
#include "miscadmin.h"
#include "nodes/supportnodes.h"
#include "parser/scansup.h"
#include "utils/array.h"
#include "utils/builtins.h"
#include "utils/date.h"
#include "utils/datetime.h"
#include "utils/sortsupport.h"
/*
* gcc's -ffast-math switch breaks routines that expect exact results from
* expressions like timeval / SECS_PER_HOUR, where timeval is double.
*/
#ifdef __FAST_MATH__
#error -ffast-math is known to break this code
#endif
static int tm2time(struct pg_tm *tm, fsec_t fsec, TimeADT *result);
static int tm2timetz(struct pg_tm *tm, fsec_t fsec, int tz, TimeTzADT *result);
static void AdjustTimeForTypmod(TimeADT *time, int32 typmod);
/* common code for timetypmodin and timetztypmodin */
static int32
anytime_typmodin(bool istz, ArrayType *ta)
{
int32 *tl;
int n;
tl = ArrayGetIntegerTypmods(ta, &n);
/*
* we're not too tense about good error message here because grammar
* shouldn't allow wrong number of modifiers for TIME
*/
if (n != 1)
ereport(ERROR,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("invalid type modifier")));
return anytime_typmod_check(istz, tl[0]);
}
/* exported so parse_expr.c can use it */
int32
anytime_typmod_check(bool istz, int32 typmod)
{
if (typmod < 0)
ereport(ERROR,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("TIME(%d)%s precision must not be negative",
typmod, (istz ? " WITH TIME ZONE" : ""))));
if (typmod > MAX_TIME_PRECISION)
{
ereport(WARNING,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("TIME(%d)%s precision reduced to maximum allowed, %d",
typmod, (istz ? " WITH TIME ZONE" : ""),
MAX_TIME_PRECISION)));
typmod = MAX_TIME_PRECISION;
}
return typmod;
}
/* common code for timetypmodout and timetztypmodout */
static char *
anytime_typmodout(bool istz, int32 typmod)
{
const char *tz = istz ? " with time zone" : " without time zone";
if (typmod >= 0)
return psprintf("(%d)%s", (int) typmod, tz);
else
return psprintf("%s", tz);
}
/*****************************************************************************
* Date ADT
*****************************************************************************/
/* date_in()
* Given date text string, convert to internal date format.
*/
Datum
date_in(PG_FUNCTION_ARGS)
{
char *str = PG_GETARG_CSTRING(0);
DateADT date;
fsec_t fsec;
struct pg_tm tt,
*tm = &tt;
int tzp;
int dtype;
int nf;
int dterr;
char *field[MAXDATEFIELDS];
int ftype[MAXDATEFIELDS];
char workbuf[MAXDATELEN + 1];
dterr = ParseDateTime(str, workbuf, sizeof(workbuf),
field, ftype, MAXDATEFIELDS, &nf);
if (dterr == 0)
dterr = DecodeDateTime(field, ftype, nf, &dtype, tm, &fsec, &tzp);
if (dterr != 0)
DateTimeParseError(dterr, str, "date");
switch (dtype)
{
case DTK_DATE:
break;
case DTK_EPOCH:
GetEpochTime(tm);
break;
case DTK_LATE:
DATE_NOEND(date);
PG_RETURN_DATEADT(date);
case DTK_EARLY:
DATE_NOBEGIN(date);
PG_RETURN_DATEADT(date);
default:
DateTimeParseError(DTERR_BAD_FORMAT, str, "date");
break;
}
/* Prevent overflow in Julian-day routines */
if (!IS_VALID_JULIAN(tm->tm_year, tm->tm_mon, tm->tm_mday))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range: \"%s\"", str)));
date = date2j(tm->tm_year, tm->tm_mon, tm->tm_mday) - POSTGRES_EPOCH_JDATE;
/* Now check for just-out-of-range dates */
if (!IS_VALID_DATE(date))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range: \"%s\"", str)));
PG_RETURN_DATEADT(date);
}
/* date_out()
* Given internal format date, convert to text string.
*/
Datum
date_out(PG_FUNCTION_ARGS)
{
DateADT date = PG_GETARG_DATEADT(0);
char *result;
struct pg_tm tt,
*tm = &tt;
char buf[MAXDATELEN + 1];
if (DATE_NOT_FINITE(date))
EncodeSpecialDate(date, buf);
else
{
j2date(date + POSTGRES_EPOCH_JDATE,
&(tm->tm_year), &(tm->tm_mon), &(tm->tm_mday));
EncodeDateOnly(tm, DateStyle, buf);
}
result = pstrdup(buf);
PG_RETURN_CSTRING(result);
}
/*
* date_recv - converts external binary format to date
*/
Datum
date_recv(PG_FUNCTION_ARGS)
{
StringInfo buf = (StringInfo) PG_GETARG_POINTER(0);
DateADT result;
result = (DateADT) pq_getmsgint(buf, sizeof(DateADT));
/* Limit to the same range that date_in() accepts. */
if (DATE_NOT_FINITE(result))
/* ok */ ;
else if (!IS_VALID_DATE(result))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range")));
PG_RETURN_DATEADT(result);
}
/*
* date_send - converts date to binary format
*/
Datum
date_send(PG_FUNCTION_ARGS)
{
DateADT date = PG_GETARG_DATEADT(0);
StringInfoData buf;
pq_begintypsend(&buf);
pq_sendint32(&buf, date);
PG_RETURN_BYTEA_P(pq_endtypsend(&buf));
}
/*
* make_date - date constructor
*/
Datum
make_date(PG_FUNCTION_ARGS)
{
struct pg_tm tm;
DateADT date;
int dterr;
bool bc = false;
tm.tm_year = PG_GETARG_INT32(0);
tm.tm_mon = PG_GETARG_INT32(1);
tm.tm_mday = PG_GETARG_INT32(2);
/* Handle negative years as BC */
if (tm.tm_year < 0)
{
bc = true;
tm.tm_year = -tm.tm_year;
}
dterr = ValidateDate(DTK_DATE_M, false, false, bc, &tm);
if (dterr != 0)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_FIELD_OVERFLOW),
errmsg("date field value out of range: %d-%02d-%02d",
tm.tm_year, tm.tm_mon, tm.tm_mday)));
/* Prevent overflow in Julian-day routines */
if (!IS_VALID_JULIAN(tm.tm_year, tm.tm_mon, tm.tm_mday))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range: %d-%02d-%02d",
tm.tm_year, tm.tm_mon, tm.tm_mday)));
date = date2j(tm.tm_year, tm.tm_mon, tm.tm_mday) - POSTGRES_EPOCH_JDATE;
/* Now check for just-out-of-range dates */
if (!IS_VALID_DATE(date))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range: %d-%02d-%02d",
tm.tm_year, tm.tm_mon, tm.tm_mday)));
PG_RETURN_DATEADT(date);
}
/*
* Convert reserved date values to string.
*/
void
EncodeSpecialDate(DateADT dt, char *str)
{
if (DATE_IS_NOBEGIN(dt))
strcpy(str, EARLY);
else if (DATE_IS_NOEND(dt))
strcpy(str, LATE);
else /* shouldn't happen */
elog(ERROR, "invalid argument for EncodeSpecialDate");
}
/*
* GetSQLCurrentDate -- implements CURRENT_DATE
*/
DateADT
GetSQLCurrentDate(void)
{
TimestampTz ts;
struct pg_tm tt,
*tm = &tt;
fsec_t fsec;
int tz;
ts = GetCurrentTransactionStartTimestamp();
if (timestamp2tm(ts, &tz, tm, &fsec, NULL, NULL) != 0)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("timestamp out of range")));
return date2j(tm->tm_year, tm->tm_mon, tm->tm_mday) - POSTGRES_EPOCH_JDATE;
}
/*
* GetSQLCurrentTime -- implements CURRENT_TIME, CURRENT_TIME(n)
*/
TimeTzADT *
GetSQLCurrentTime(int32 typmod)
{
TimeTzADT *result;
TimestampTz ts;
struct pg_tm tt,
*tm = &tt;
fsec_t fsec;
int tz;
ts = GetCurrentTransactionStartTimestamp();
if (timestamp2tm(ts, &tz, tm, &fsec, NULL, NULL) != 0)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("timestamp out of range")));
result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
tm2timetz(tm, fsec, tz, result);
AdjustTimeForTypmod(&(result->time), typmod);
return result;
}
/*
* GetSQLLocalTime -- implements LOCALTIME, LOCALTIME(n)
*/
TimeADT
GetSQLLocalTime(int32 typmod)
{
TimeADT result;
TimestampTz ts;
struct pg_tm tt,
*tm = &tt;
fsec_t fsec;
int tz;
ts = GetCurrentTransactionStartTimestamp();
if (timestamp2tm(ts, &tz, tm, &fsec, NULL, NULL) != 0)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("timestamp out of range")));
tm2time(tm, fsec, &result);
AdjustTimeForTypmod(&result, typmod);
return result;
}
/*
* Comparison functions for dates
*/
Datum
date_eq(PG_FUNCTION_ARGS)
{
DateADT dateVal1 = PG_GETARG_DATEADT(0);
DateADT dateVal2 = PG_GETARG_DATEADT(1);
PG_RETURN_BOOL(dateVal1 == dateVal2);
}
Datum
date_ne(PG_FUNCTION_ARGS)
{
DateADT dateVal1 = PG_GETARG_DATEADT(0);
DateADT dateVal2 = PG_GETARG_DATEADT(1);
PG_RETURN_BOOL(dateVal1 != dateVal2);
}
Datum
date_lt(PG_FUNCTION_ARGS)
{
DateADT dateVal1 = PG_GETARG_DATEADT(0);
DateADT dateVal2 = PG_GETARG_DATEADT(1);
PG_RETURN_BOOL(dateVal1 < dateVal2);
}
Datum
date_le(PG_FUNCTION_ARGS)
{
DateADT dateVal1 = PG_GETARG_DATEADT(0);
DateADT dateVal2 = PG_GETARG_DATEADT(1);
PG_RETURN_BOOL(dateVal1 <= dateVal2);
}
Datum
date_gt(PG_FUNCTION_ARGS)
{
DateADT dateVal1 = PG_GETARG_DATEADT(0);
DateADT dateVal2 = PG_GETARG_DATEADT(1);
PG_RETURN_BOOL(dateVal1 > dateVal2);
}
Datum
date_ge(PG_FUNCTION_ARGS)
{
DateADT dateVal1 = PG_GETARG_DATEADT(0);
DateADT dateVal2 = PG_GETARG_DATEADT(1);
PG_RETURN_BOOL(dateVal1 >= dateVal2);
}
Datum
date_cmp(PG_FUNCTION_ARGS)
{
DateADT dateVal1 = PG_GETARG_DATEADT(0);
DateADT dateVal2 = PG_GETARG_DATEADT(1);
if (dateVal1 < dateVal2)
PG_RETURN_INT32(-1);
else if (dateVal1 > dateVal2)
PG_RETURN_INT32(1);
PG_RETURN_INT32(0);
}
static int
date_fastcmp(Datum x, Datum y, SortSupport ssup)
{
DateADT a = DatumGetDateADT(x);
DateADT b = DatumGetDateADT(y);
if (a < b)
return -1;
else if (a > b)
return 1;
return 0;
}
Datum
date_sortsupport(PG_FUNCTION_ARGS)
{
SortSupport ssup = (SortSupport) PG_GETARG_POINTER(0);
ssup->comparator = date_fastcmp;
PG_RETURN_VOID();
}
Datum
date_finite(PG_FUNCTION_ARGS)
{
DateADT date = PG_GETARG_DATEADT(0);
PG_RETURN_BOOL(!DATE_NOT_FINITE(date));
}
Datum
date_larger(PG_FUNCTION_ARGS)
{
DateADT dateVal1 = PG_GETARG_DATEADT(0);
DateADT dateVal2 = PG_GETARG_DATEADT(1);
PG_RETURN_DATEADT((dateVal1 > dateVal2) ? dateVal1 : dateVal2);
}
Datum
date_smaller(PG_FUNCTION_ARGS)
{
DateADT dateVal1 = PG_GETARG_DATEADT(0);
DateADT dateVal2 = PG_GETARG_DATEADT(1);
PG_RETURN_DATEADT((dateVal1 < dateVal2) ? dateVal1 : dateVal2);
}
/* Compute difference between two dates in days.
*/
Datum
date_mi(PG_FUNCTION_ARGS)
{
DateADT dateVal1 = PG_GETARG_DATEADT(0);
DateADT dateVal2 = PG_GETARG_DATEADT(1);
if (DATE_NOT_FINITE(dateVal1) || DATE_NOT_FINITE(dateVal2))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("cannot subtract infinite dates")));
PG_RETURN_INT32((int32) (dateVal1 - dateVal2));
}
/* Add a number of days to a date, giving a new date.
* Must handle both positive and negative numbers of days.
*/
Datum
date_pli(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
int32 days = PG_GETARG_INT32(1);
DateADT result;
if (DATE_NOT_FINITE(dateVal))
PG_RETURN_DATEADT(dateVal); /* can't change infinity */
result = dateVal + days;
/* Check for integer overflow and out-of-allowed-range */
if ((days >= 0 ? (result < dateVal) : (result > dateVal)) ||
!IS_VALID_DATE(result))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range")));
PG_RETURN_DATEADT(result);
}
/* Subtract a number of days from a date, giving a new date.
*/
Datum
date_mii(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
int32 days = PG_GETARG_INT32(1);
DateADT result;
if (DATE_NOT_FINITE(dateVal))
PG_RETURN_DATEADT(dateVal); /* can't change infinity */
result = dateVal - days;
/* Check for integer overflow and out-of-allowed-range */
if ((days >= 0 ? (result > dateVal) : (result < dateVal)) ||
!IS_VALID_DATE(result))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range")));
PG_RETURN_DATEADT(result);
}
/*
* Internal routines for promoting date to timestamp and timestamp with
* time zone
*/
static Timestamp
date2timestamp(DateADT dateVal)
{
Timestamp result;
if (DATE_IS_NOBEGIN(dateVal))
TIMESTAMP_NOBEGIN(result);
else if (DATE_IS_NOEND(dateVal))
TIMESTAMP_NOEND(result);
else
{
/*
* Date's range is wider than timestamp's, so check for boundaries.
* Since dates have the same minimum values as timestamps, only upper
* boundary need be checked for overflow.
*/
if (dateVal >= (TIMESTAMP_END_JULIAN - POSTGRES_EPOCH_JDATE))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range for timestamp")));
/* date is days since 2000, timestamp is microseconds since same... */
result = dateVal * USECS_PER_DAY;
}
return result;
}
static TimestampTz
date2timestamptz(DateADT dateVal)
{
TimestampTz result;
struct pg_tm tt,
*tm = &tt;
int tz;
if (DATE_IS_NOBEGIN(dateVal))
TIMESTAMP_NOBEGIN(result);
else if (DATE_IS_NOEND(dateVal))
TIMESTAMP_NOEND(result);
else
{
/*
* Date's range is wider than timestamp's, so check for boundaries.
* Since dates have the same minimum values as timestamps, only upper
* boundary need be checked for overflow.
*/
if (dateVal >= (TIMESTAMP_END_JULIAN - POSTGRES_EPOCH_JDATE))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range for timestamp")));
j2date(dateVal + POSTGRES_EPOCH_JDATE,
&(tm->tm_year), &(tm->tm_mon), &(tm->tm_mday));
tm->tm_hour = 0;
tm->tm_min = 0;
tm->tm_sec = 0;
tz = DetermineTimeZoneOffset(tm, session_timezone);
result = dateVal * USECS_PER_DAY + tz * USECS_PER_SEC;
/*
* Since it is possible to go beyond allowed timestamptz range because
* of time zone, check for allowed timestamp range after adding tz.
*/
if (!IS_VALID_TIMESTAMP(result))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range for timestamp")));
}
return result;
}
/*
* date2timestamp_no_overflow
*
* This is chartered to produce a double value that is numerically
* equivalent to the corresponding Timestamp value, if the date is in the
* valid range of Timestamps, but in any case not throw an overflow error.
* We can do this since the numerical range of double is greater than
* that of non-erroneous timestamps. The results are currently only
* used for statistical estimation purposes.
*/
double
date2timestamp_no_overflow(DateADT dateVal)
{
double result;
if (DATE_IS_NOBEGIN(dateVal))
result = -DBL_MAX;
else if (DATE_IS_NOEND(dateVal))
result = DBL_MAX;
else
{
/* date is days since 2000, timestamp is microseconds since same... */
result = dateVal * (double) USECS_PER_DAY;
}
return result;
}
/*
* Crosstype comparison functions for dates
*/
Datum
date_eq_timestamp(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
Timestamp dt2 = PG_GETARG_TIMESTAMP(1);
Timestamp dt1;
dt1 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) == 0);
}
Datum
date_ne_timestamp(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
Timestamp dt2 = PG_GETARG_TIMESTAMP(1);
Timestamp dt1;
dt1 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) != 0);
}
Datum
date_lt_timestamp(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
Timestamp dt2 = PG_GETARG_TIMESTAMP(1);
Timestamp dt1;
dt1 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) < 0);
}
Datum
date_gt_timestamp(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
Timestamp dt2 = PG_GETARG_TIMESTAMP(1);
Timestamp dt1;
dt1 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) > 0);
}
Datum
date_le_timestamp(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
Timestamp dt2 = PG_GETARG_TIMESTAMP(1);
Timestamp dt1;
dt1 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) <= 0);
}
Datum
date_ge_timestamp(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
Timestamp dt2 = PG_GETARG_TIMESTAMP(1);
Timestamp dt1;
dt1 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) >= 0);
}
Datum
date_cmp_timestamp(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
Timestamp dt2 = PG_GETARG_TIMESTAMP(1);
Timestamp dt1;
dt1 = date2timestamp(dateVal);
PG_RETURN_INT32(timestamp_cmp_internal(dt1, dt2));
}
Datum
date_eq_timestamptz(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
TimestampTz dt1;
dt1 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) == 0);
}
Datum
date_ne_timestamptz(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
TimestampTz dt1;
dt1 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) != 0);
}
Datum
date_lt_timestamptz(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
TimestampTz dt1;
dt1 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) < 0);
}
Datum
date_gt_timestamptz(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
TimestampTz dt1;
dt1 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) > 0);
}
Datum
date_le_timestamptz(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
TimestampTz dt1;
dt1 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) <= 0);
}
Datum
date_ge_timestamptz(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
TimestampTz dt1;
dt1 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) >= 0);
}
Datum
date_cmp_timestamptz(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
TimestampTz dt1;
dt1 = date2timestamptz(dateVal);
PG_RETURN_INT32(timestamptz_cmp_internal(dt1, dt2));
}
Datum
timestamp_eq_date(PG_FUNCTION_ARGS)
{
Timestamp dt1 = PG_GETARG_TIMESTAMP(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
Timestamp dt2;
dt2 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) == 0);
}
Datum
timestamp_ne_date(PG_FUNCTION_ARGS)
{
Timestamp dt1 = PG_GETARG_TIMESTAMP(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
Timestamp dt2;
dt2 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) != 0);
}
Datum
timestamp_lt_date(PG_FUNCTION_ARGS)
{
Timestamp dt1 = PG_GETARG_TIMESTAMP(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
Timestamp dt2;
dt2 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) < 0);
}
Datum
timestamp_gt_date(PG_FUNCTION_ARGS)
{
Timestamp dt1 = PG_GETARG_TIMESTAMP(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
Timestamp dt2;
dt2 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) > 0);
}
Datum
timestamp_le_date(PG_FUNCTION_ARGS)
{
Timestamp dt1 = PG_GETARG_TIMESTAMP(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
Timestamp dt2;
dt2 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) <= 0);
}
Datum
timestamp_ge_date(PG_FUNCTION_ARGS)
{
Timestamp dt1 = PG_GETARG_TIMESTAMP(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
Timestamp dt2;
dt2 = date2timestamp(dateVal);
PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) >= 0);
}
Datum
timestamp_cmp_date(PG_FUNCTION_ARGS)
{
Timestamp dt1 = PG_GETARG_TIMESTAMP(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
Timestamp dt2;
dt2 = date2timestamp(dateVal);
PG_RETURN_INT32(timestamp_cmp_internal(dt1, dt2));
}
Datum
timestamptz_eq_date(PG_FUNCTION_ARGS)
{
TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
TimestampTz dt2;
dt2 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) == 0);
}
Datum
timestamptz_ne_date(PG_FUNCTION_ARGS)
{
TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
TimestampTz dt2;
dt2 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) != 0);
}
Datum
timestamptz_lt_date(PG_FUNCTION_ARGS)
{
TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
TimestampTz dt2;
dt2 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) < 0);
}
Datum
timestamptz_gt_date(PG_FUNCTION_ARGS)
{
TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
TimestampTz dt2;
dt2 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) > 0);
}
Datum
timestamptz_le_date(PG_FUNCTION_ARGS)
{
TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
TimestampTz dt2;
dt2 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) <= 0);
}
Datum
timestamptz_ge_date(PG_FUNCTION_ARGS)
{
TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
TimestampTz dt2;
dt2 = date2timestamptz(dateVal);
PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) >= 0);
}
Datum
timestamptz_cmp_date(PG_FUNCTION_ARGS)
{
TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
DateADT dateVal = PG_GETARG_DATEADT(1);
TimestampTz dt2;
dt2 = date2timestamptz(dateVal);
PG_RETURN_INT32(timestamptz_cmp_internal(dt1, dt2));
}
/*
* in_range support function for date.
*
* We implement this by promoting the dates to timestamp (without time zone)
* and then using the timestamp-and-interval in_range function.
*/
Datum
in_range_date_interval(PG_FUNCTION_ARGS)
{
DateADT val = PG_GETARG_DATEADT(0);
DateADT base = PG_GETARG_DATEADT(1);
Interval *offset = PG_GETARG_INTERVAL_P(2);
bool sub = PG_GETARG_BOOL(3);
bool less = PG_GETARG_BOOL(4);
Timestamp valStamp;
Timestamp baseStamp;
valStamp = date2timestamp(val);
baseStamp = date2timestamp(base);
return DirectFunctionCall5(in_range_timestamp_interval,
TimestampGetDatum(valStamp),
TimestampGetDatum(baseStamp),
IntervalPGetDatum(offset),
BoolGetDatum(sub),
BoolGetDatum(less));
}
/* Add an interval to a date, giving a new date.
* Must handle both positive and negative intervals.
*
* We implement this by promoting the date to timestamp (without time zone)
* and then using the timestamp plus interval function.
*/
Datum
date_pl_interval(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
Interval *span = PG_GETARG_INTERVAL_P(1);
Timestamp dateStamp;
dateStamp = date2timestamp(dateVal);
return DirectFunctionCall2(timestamp_pl_interval,
TimestampGetDatum(dateStamp),
PointerGetDatum(span));
}
/* Subtract an interval from a date, giving a new date.
* Must handle both positive and negative intervals.
*
* We implement this by promoting the date to timestamp (without time zone)
* and then using the timestamp minus interval function.
*/
Datum
date_mi_interval(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
Interval *span = PG_GETARG_INTERVAL_P(1);
Timestamp dateStamp;
dateStamp = date2timestamp(dateVal);
return DirectFunctionCall2(timestamp_mi_interval,
TimestampGetDatum(dateStamp),
PointerGetDatum(span));
}
/* date_timestamp()
* Convert date to timestamp data type.
*/
Datum
date_timestamp(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
Timestamp result;
result = date2timestamp(dateVal);
PG_RETURN_TIMESTAMP(result);
}
/* timestamp_date()
* Convert timestamp to date data type.
*/
Datum
timestamp_date(PG_FUNCTION_ARGS)
{
Timestamp timestamp = PG_GETARG_TIMESTAMP(0);
DateADT result;
struct pg_tm tt,
*tm = &tt;
fsec_t fsec;
if (TIMESTAMP_IS_NOBEGIN(timestamp))
DATE_NOBEGIN(result);
else if (TIMESTAMP_IS_NOEND(timestamp))
DATE_NOEND(result);
else
{
if (timestamp2tm(timestamp, NULL, tm, &fsec, NULL, NULL) != 0)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("timestamp out of range")));
result = date2j(tm->tm_year, tm->tm_mon, tm->tm_mday) - POSTGRES_EPOCH_JDATE;
}
PG_RETURN_DATEADT(result);
}
/* date_timestamptz()
* Convert date to timestamp with time zone data type.
*/
Datum
date_timestamptz(PG_FUNCTION_ARGS)
{
DateADT dateVal = PG_GETARG_DATEADT(0);
TimestampTz result;
result = date2timestamptz(dateVal);
PG_RETURN_TIMESTAMP(result);
}
/* timestamptz_date()
* Convert timestamp with time zone to date data type.
*/
Datum
timestamptz_date(PG_FUNCTION_ARGS)
{
TimestampTz timestamp = PG_GETARG_TIMESTAMP(0);
DateADT result;
struct pg_tm tt,
*tm = &tt;
fsec_t fsec;
int tz;
if (TIMESTAMP_IS_NOBEGIN(timestamp))
DATE_NOBEGIN(result);
else if (TIMESTAMP_IS_NOEND(timestamp))
DATE_NOEND(result);
else
{
if (timestamp2tm(timestamp, &tz, tm, &fsec, NULL, NULL) != 0)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("timestamp out of range")));
result = date2j(tm->tm_year, tm->tm_mon, tm->tm_mday) - POSTGRES_EPOCH_JDATE;
}
PG_RETURN_DATEADT(result);
}
/*****************************************************************************
* Time ADT
*****************************************************************************/
Datum
time_in(PG_FUNCTION_ARGS)
{
char *str = PG_GETARG_CSTRING(0);
#ifdef NOT_USED
Oid typelem = PG_GETARG_OID(1);
#endif
int32 typmod = PG_GETARG_INT32(2);
TimeADT result;
fsec_t fsec;
struct pg_tm tt,
*tm = &tt;
int tz;
int nf;
int dterr;
char workbuf[MAXDATELEN + 1];
char *field[MAXDATEFIELDS];
int dtype;
int ftype[MAXDATEFIELDS];
dterr = ParseDateTime(str, workbuf, sizeof(workbuf),
field, ftype, MAXDATEFIELDS, &nf);
if (dterr == 0)
dterr = DecodeTimeOnly(field, ftype, nf, &dtype, tm, &fsec, &tz);
if (dterr != 0)
DateTimeParseError(dterr, str, "time");
tm2time(tm, fsec, &result);
AdjustTimeForTypmod(&result, typmod);
PG_RETURN_TIMEADT(result);
}
/* tm2time()
* Convert a tm structure to a time data type.
*/
static int
tm2time(struct pg_tm *tm, fsec_t fsec, TimeADT *result)
{
*result = ((((tm->tm_hour * MINS_PER_HOUR + tm->tm_min) * SECS_PER_MINUTE) + tm->tm_sec)
* USECS_PER_SEC) + fsec;
return 0;
}
/* time2tm()
* Convert time data type to POSIX time structure.
*
* For dates within the range of pg_time_t, convert to the local time zone.
* If out of this range, leave as UTC (in practice that could only happen
* if pg_time_t is just 32 bits) - thomas 97/05/27
*/
int
time2tm(TimeADT time, struct pg_tm *tm, fsec_t *fsec)
{
tm->tm_hour = time / USECS_PER_HOUR;
time -= tm->tm_hour * USECS_PER_HOUR;
tm->tm_min = time / USECS_PER_MINUTE;
time -= tm->tm_min * USECS_PER_MINUTE;
tm->tm_sec = time / USECS_PER_SEC;
time -= tm->tm_sec * USECS_PER_SEC;
*fsec = time;
return 0;
}
Datum
time_out(PG_FUNCTION_ARGS)
{
TimeADT time = PG_GETARG_TIMEADT(0);
char *result;
struct pg_tm tt,
*tm = &tt;
fsec_t fsec;
char buf[MAXDATELEN + 1];
time2tm(time, tm, &fsec);
EncodeTimeOnly(tm, fsec, false, 0, DateStyle, buf);
result = pstrdup(buf);
PG_RETURN_CSTRING(result);
}
/*
* time_recv - converts external binary format to time
*/
Datum
time_recv(PG_FUNCTION_ARGS)
{
StringInfo buf = (StringInfo) PG_GETARG_POINTER(0);
#ifdef NOT_USED
Oid typelem = PG_GETARG_OID(1);
#endif
int32 typmod = PG_GETARG_INT32(2);
TimeADT result;
result = pq_getmsgint64(buf);
if (result < INT64CONST(0) || result > USECS_PER_DAY)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("time out of range")));
AdjustTimeForTypmod(&result, typmod);
PG_RETURN_TIMEADT(result);
}
/*
* time_send - converts time to binary format
*/
Datum
time_send(PG_FUNCTION_ARGS)
{
TimeADT time = PG_GETARG_TIMEADT(0);
StringInfoData buf;
pq_begintypsend(&buf);
pq_sendint64(&buf, time);
PG_RETURN_BYTEA_P(pq_endtypsend(&buf));
}
Datum
timetypmodin(PG_FUNCTION_ARGS)
{
ArrayType *ta = PG_GETARG_ARRAYTYPE_P(0);
PG_RETURN_INT32(anytime_typmodin(false, ta));
}
Datum
timetypmodout(PG_FUNCTION_ARGS)
{
int32 typmod = PG_GETARG_INT32(0);
PG_RETURN_CSTRING(anytime_typmodout(false, typmod));
}
/*
* make_time - time constructor
*/
Datum
make_time(PG_FUNCTION_ARGS)
{
int tm_hour = PG_GETARG_INT32(0);
int tm_min = PG_GETARG_INT32(1);
double sec = PG_GETARG_FLOAT8(2);
TimeADT time;
/* This should match the checks in DecodeTimeOnly */
if (tm_hour < 0 || tm_min < 0 || tm_min > MINS_PER_HOUR - 1 ||
sec < 0 || sec > SECS_PER_MINUTE ||
tm_hour > HOURS_PER_DAY ||
/* test for > 24:00:00 */
(tm_hour == HOURS_PER_DAY && (tm_min > 0 || sec > 0)))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_FIELD_OVERFLOW),
errmsg("time field value out of range: %d:%02d:%02g",
tm_hour, tm_min, sec)));
/* This should match tm2time */
time = (((tm_hour * MINS_PER_HOUR + tm_min) * SECS_PER_MINUTE)
* USECS_PER_SEC) + rint(sec * USECS_PER_SEC);
PG_RETURN_TIMEADT(time);
}
/* time_support()
*
* Planner support function for the time_scale() and timetz_scale()
* length coercion functions (we need not distinguish them here).
*/
Datum
time_support(PG_FUNCTION_ARGS)
{
Node *rawreq = (Node *) PG_GETARG_POINTER(0);
Node *ret = NULL;
if (IsA(rawreq, SupportRequestSimplify))
{
SupportRequestSimplify *req = (SupportRequestSimplify *) rawreq;
ret = TemporalSimplify(MAX_TIME_PRECISION, (Node *) req->fcall);
}
PG_RETURN_POINTER(ret);
}
/* time_scale()
* Adjust time type for specified scale factor.
* Used by PostgreSQL type system to stuff columns.
*/
Datum
time_scale(PG_FUNCTION_ARGS)
{
TimeADT time = PG_GETARG_TIMEADT(0);
int32 typmod = PG_GETARG_INT32(1);
TimeADT result;
result = time;
AdjustTimeForTypmod(&result, typmod);
PG_RETURN_TIMEADT(result);
}
/* AdjustTimeForTypmod()
* Force the precision of the time value to a specified value.
* Uses *exactly* the same code as in AdjustTimestampForTypmod()
* but we make a separate copy because those types do not
* have a fundamental tie together but rather a coincidence of
* implementation. - thomas
*/
static void
AdjustTimeForTypmod(TimeADT *time, int32 typmod)
{
static const int64 TimeScales[MAX_TIME_PRECISION + 1] = {
INT64CONST(1000000),
INT64CONST(100000),
INT64CONST(10000),
INT64CONST(1000),
INT64CONST(100),
INT64CONST(10),
INT64CONST(1)
};
static const int64 TimeOffsets[MAX_TIME_PRECISION + 1] = {
INT64CONST(500000),
INT64CONST(50000),
INT64CONST(5000),
INT64CONST(500),
INT64CONST(50),
INT64CONST(5),
INT64CONST(0)
};
if (typmod >= 0 && typmod <= MAX_TIME_PRECISION)
{
if (*time >= INT64CONST(0))
*time = ((*time + TimeOffsets[typmod]) / TimeScales[typmod]) *
TimeScales[typmod];
else
*time = -((((-*time) + TimeOffsets[typmod]) / TimeScales[typmod]) *
TimeScales[typmod]);
}
}
Datum
time_eq(PG_FUNCTION_ARGS)
{
TimeADT time1 = PG_GETARG_TIMEADT(0);
TimeADT time2 = PG_GETARG_TIMEADT(1);
PG_RETURN_BOOL(time1 == time2);
}
Datum
time_ne(PG_FUNCTION_ARGS)
{
TimeADT time1 = PG_GETARG_TIMEADT(0);
TimeADT time2 = PG_GETARG_TIMEADT(1);
PG_RETURN_BOOL(time1 != time2);
}
Datum
time_lt(PG_FUNCTION_ARGS)
{
TimeADT time1 = PG_GETARG_TIMEADT(0);
TimeADT time2 = PG_GETARG_TIMEADT(1);
PG_RETURN_BOOL(time1 < time2);
}
Datum
time_le(PG_FUNCTION_ARGS)
{
TimeADT time1 = PG_GETARG_TIMEADT(0);
TimeADT time2 = PG_GETARG_TIMEADT(1);
PG_RETURN_BOOL(time1 <= time2);
}
Datum
time_gt(PG_FUNCTION_ARGS)
{
TimeADT time1 = PG_GETARG_TIMEADT(0);
TimeADT time2 = PG_GETARG_TIMEADT(1);
PG_RETURN_BOOL(time1 > time2);
}
Datum
time_ge(PG_FUNCTION_ARGS)
{
TimeADT time1 = PG_GETARG_TIMEADT(0);
TimeADT time2 = PG_GETARG_TIMEADT(1);
PG_RETURN_BOOL(time1 >= time2);
}
Datum
time_cmp(PG_FUNCTION_ARGS)
{
TimeADT time1 = PG_GETARG_TIMEADT(0);
TimeADT time2 = PG_GETARG_TIMEADT(1);
if (time1 < time2)
PG_RETURN_INT32(-1);
if (time1 > time2)
PG_RETURN_INT32(1);
PG_RETURN_INT32(0);
}
Datum
time_hash(PG_FUNCTION_ARGS)
{
return hashint8(fcinfo);
}
Datum
time_hash_extended(PG_FUNCTION_ARGS)
{
return hashint8extended(fcinfo);
}
Datum
time_larger(PG_FUNCTION_ARGS)
{
TimeADT time1 = PG_GETARG_TIMEADT(0);
TimeADT time2 = PG_GETARG_TIMEADT(1);
PG_RETURN_TIMEADT((time1 > time2) ? time1 : time2);
}
Datum
time_smaller(PG_FUNCTION_ARGS)
{
TimeADT time1 = PG_GETARG_TIMEADT(0);
TimeADT time2 = PG_GETARG_TIMEADT(1);
PG_RETURN_TIMEADT((time1 < time2) ? time1 : time2);
}
/* overlaps_time() --- implements the SQL OVERLAPS operator.
*
* Algorithm is per SQL spec. This is much harder than you'd think
* because the spec requires us to deliver a non-null answer in some cases
* where some of the inputs are null.
*/
Datum
overlaps_time(PG_FUNCTION_ARGS)
{
/*
* The arguments are TimeADT, but we leave them as generic Datums to avoid
* dereferencing nulls (TimeADT is pass-by-reference!)
*/
Datum ts1 = PG_GETARG_DATUM(0);
Datum te1 = PG_GETARG_DATUM(1);
Datum ts2 = PG_GETARG_DATUM(2);
Datum te2 = PG_GETARG_DATUM(3);
bool ts1IsNull = PG_ARGISNULL(0);
bool te1IsNull = PG_ARGISNULL(1);
bool ts2IsNull = PG_ARGISNULL(2);
bool te2IsNull = PG_ARGISNULL(3);
#define TIMEADT_GT(t1,t2) \
(DatumGetTimeADT(t1) > DatumGetTimeADT(t2))
#define TIMEADT_LT(t1,t2) \
(DatumGetTimeADT(t1) < DatumGetTimeADT(t2))
/*
* If both endpoints of interval 1 are null, the result is null (unknown).
* If just one endpoint is null, take ts1 as the non-null one. Otherwise,
* take ts1 as the lesser endpoint.
*/
if (ts1IsNull)
{
if (te1IsNull)
PG_RETURN_NULL();
/* swap null for non-null */
ts1 = te1;
te1IsNull = true;
}
else if (!te1IsNull)
{
if (TIMEADT_GT(ts1, te1))
{
Datum tt = ts1;
ts1 = te1;
te1 = tt;
}
}
/* Likewise for interval 2. */
if (ts2IsNull)
{
if (te2IsNull)
PG_RETURN_NULL();
/* swap null for non-null */
ts2 = te2;
te2IsNull = true;
}
else if (!te2IsNull)
{
if (TIMEADT_GT(ts2, te2))
{
Datum tt = ts2;
ts2 = te2;
te2 = tt;
}
}
/*
* At this point neither ts1 nor ts2 is null, so we can consider three
* cases: ts1 > ts2, ts1 < ts2, ts1 = ts2
*/
if (TIMEADT_GT(ts1, ts2))
{
/*
* This case is ts1 < te2 OR te1 < te2, which may look redundant but
* in the presence of nulls it's not quite completely so.
*/
if (te2IsNull)
PG_RETURN_NULL();
if (TIMEADT_LT(ts1, te2))
PG_RETURN_BOOL(true);
if (te1IsNull)
PG_RETURN_NULL();
/*
* If te1 is not null then we had ts1 <= te1 above, and we just found
* ts1 >= te2, hence te1 >= te2.
*/
PG_RETURN_BOOL(false);
}
else if (TIMEADT_LT(ts1, ts2))
{
/* This case is ts2 < te1 OR te2 < te1 */
if (te1IsNull)
PG_RETURN_NULL();
if (TIMEADT_LT(ts2, te1))
PG_RETURN_BOOL(true);
if (te2IsNull)
PG_RETURN_NULL();
/*
* If te2 is not null then we had ts2 <= te2 above, and we just found
* ts2 >= te1, hence te2 >= te1.
*/
PG_RETURN_BOOL(false);
}
else
{
/*
* For ts1 = ts2 the spec says te1 <> te2 OR te1 = te2, which is a
* rather silly way of saying "true if both are nonnull, else null".
*/
if (te1IsNull || te2IsNull)
PG_RETURN_NULL();
PG_RETURN_BOOL(true);
}
#undef TIMEADT_GT
#undef TIMEADT_LT
}
/* timestamp_time()
* Convert timestamp to time data type.
*/
Datum
timestamp_time(PG_FUNCTION_ARGS)
{
Timestamp timestamp = PG_GETARG_TIMESTAMP(0);
TimeADT result;
struct pg_tm tt,
*tm = &tt;
fsec_t fsec;
if (TIMESTAMP_NOT_FINITE(timestamp))
PG_RETURN_NULL();
if (timestamp2tm(timestamp, NULL, tm, &fsec, NULL, NULL) != 0)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("timestamp out of range")));
/*
* Could also do this with time = (timestamp / USECS_PER_DAY *
* USECS_PER_DAY) - timestamp;
*/
result = ((((tm->tm_hour * MINS_PER_HOUR + tm->tm_min) * SECS_PER_MINUTE) + tm->tm_sec) *
USECS_PER_SEC) + fsec;
PG_RETURN_TIMEADT(result);
}
/* timestamptz_time()
* Convert timestamptz to time data type.
*/
Datum
timestamptz_time(PG_FUNCTION_ARGS)
{
TimestampTz timestamp = PG_GETARG_TIMESTAMP(0);
TimeADT result;
struct pg_tm tt,
*tm = &tt;
int tz;
fsec_t fsec;
if (TIMESTAMP_NOT_FINITE(timestamp))
PG_RETURN_NULL();
if (timestamp2tm(timestamp, &tz, tm, &fsec, NULL, NULL) != 0)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("timestamp out of range")));
/*
* Could also do this with time = (timestamp / USECS_PER_DAY *
* USECS_PER_DAY) - timestamp;
*/
result = ((((tm->tm_hour * MINS_PER_HOUR + tm->tm_min) * SECS_PER_MINUTE) + tm->tm_sec) *
USECS_PER_SEC) + fsec;
PG_RETURN_TIMEADT(result);
}
/* datetime_timestamp()
* Convert date and time to timestamp data type.
*/
Datum
datetime_timestamp(PG_FUNCTION_ARGS)
{
DateADT date = PG_GETARG_DATEADT(0);
TimeADT time = PG_GETARG_TIMEADT(1);
Timestamp result;
result = date2timestamp(date);
if (!TIMESTAMP_NOT_FINITE(result))
{
result += time;
if (!IS_VALID_TIMESTAMP(result))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("timestamp out of range")));
}
PG_RETURN_TIMESTAMP(result);
}
/* time_interval()
* Convert time to interval data type.
*/
Datum
time_interval(PG_FUNCTION_ARGS)
{
TimeADT time = PG_GETARG_TIMEADT(0);
Interval *result;
result = (Interval *) palloc(sizeof(Interval));
result->time = time;
result->day = 0;
result->month = 0;
PG_RETURN_INTERVAL_P(result);
}
/* interval_time()
* Convert interval to time data type.
*
* This is defined as producing the fractional-day portion of the interval.
* Therefore, we can just ignore the months field. It is not real clear
* what to do with negative intervals, but we choose to subtract the floor,
* so that, say, '-2 hours' becomes '22:00:00'.
*/
Datum
interval_time(PG_FUNCTION_ARGS)
{
Interval *span = PG_GETARG_INTERVAL_P(0);
TimeADT result;
int64 days;
result = span->time;
if (result >= USECS_PER_DAY)
{
days = result / USECS_PER_DAY;
result -= days * USECS_PER_DAY;
}
else if (result < 0)
{
days = (-result + USECS_PER_DAY - 1) / USECS_PER_DAY;
result += days * USECS_PER_DAY;
}
PG_RETURN_TIMEADT(result);
}
/* time_mi_time()
* Subtract two times to produce an interval.
*/
Datum
time_mi_time(PG_FUNCTION_ARGS)
{
TimeADT time1 = PG_GETARG_TIMEADT(0);
TimeADT time2 = PG_GETARG_TIMEADT(1);
Interval *result;
result = (Interval *) palloc(sizeof(Interval));
result->month = 0;
result->day = 0;
result->time = time1 - time2;
PG_RETURN_INTERVAL_P(result);
}
/* time_pl_interval_internal()
* Common code to add interval to time.
*/
static inline TimeADT
time_pl_interval_internal(TimeADT time, Interval *span)
{
TimeADT result;
result = time + span->time;
result -= result / USECS_PER_DAY * USECS_PER_DAY;
if (result < INT64CONST(0))
result += USECS_PER_DAY;
return result;
}
/* time_pl_interval()
* Add interval to time.
*/
Datum
time_pl_interval(PG_FUNCTION_ARGS)
{
TimeADT time = PG_GETARG_TIMEADT(0);
Interval *span = PG_GETARG_INTERVAL_P(1);
TimeADT result = time_pl_interval_internal(time, span);
PG_RETURN_TIMEADT(result);
}
/*
* time_li_fraction
*
* What fraction of interval <x0, x1> does <x0, x> represent?
*/
float8
time_li_fraction(TimeADT x, TimeADT x0, TimeADT x1,
bool *eq_bounds, bool *eq_abscissas)
{
float8 result;
Interval diffx;
Interval diffx1;
Assert(eq_bounds && eq_abscissas);
*eq_bounds = false;
*eq_abscissas = false;
diffx.time = x - x0;
diffx.month = 0;
diffx.day = 0;
diffx1.time = x1 - x0;
diffx1.month = 0;
diffx1.day = 0;
if ( ! interval_div_internal(&diffx, &diffx1, &result, NULL) )
{
*eq_bounds = true;
*eq_abscissas = (x == x0);
result = NAN;
}
return result;
}
/*
* time_li_value
*
* What interval value lies fraction <f> of the way into interval
* <y0, y1>?
*
* Note
* li_value(0.0, y0, y1) --> y0
* li_value(1.0, y0, y1) --> y1
*/
Timestamp
time_li_value(float8 f, TimeADT y0, TimeADT y1)
{
TimeADT y;
Interval diffy;
Interval *offset;
diffy.month = 0;
diffy.day = 0;
diffy.time = y1 - y0;
offset = DatumGetIntervalP(DirectFunctionCall2(interval_mul, IntervalPGetDatum(&diffy),
Float8GetDatum(f)));
y = time_pl_interval_internal(y0, offset);
pfree(offset);
return y;
}
/* time_mi_interval()
* Subtract interval from time.
*/
Datum
time_mi_interval(PG_FUNCTION_ARGS)
{
TimeADT time = PG_GETARG_TIMEADT(0);
Interval *span = PG_GETARG_INTERVAL_P(1);
TimeADT result;
result = time - span->time;
result -= result / USECS_PER_DAY * USECS_PER_DAY;
if (result < INT64CONST(0))
result += USECS_PER_DAY;
PG_RETURN_TIMEADT(result);
}
/*
* in_range support function for time.
*/
Datum
in_range_time_interval(PG_FUNCTION_ARGS)
{
TimeADT val = PG_GETARG_TIMEADT(0);
TimeADT base = PG_GETARG_TIMEADT(1);
Interval *offset = PG_GETARG_INTERVAL_P(2);
bool sub = PG_GETARG_BOOL(3);
bool less = PG_GETARG_BOOL(4);
TimeADT sum;
/*
* Like time_pl_interval/time_mi_interval, we disregard the month and day
* fields of the offset. So our test for negative should too.
*/
if (offset->time < 0)
ereport(ERROR,
(errcode(ERRCODE_INVALID_PRECEDING_OR_FOLLOWING_SIZE),
errmsg("invalid preceding or following size in window function")));
/*
* We can't use time_pl_interval/time_mi_interval here, because their
* wraparound behavior would give wrong (or at least undesirable) answers.
* Fortunately the equivalent non-wrapping behavior is trivial, especially
* since we don't worry about integer overflow.
*/
if (sub)
sum = base - offset->time;
else
sum = base + offset->time;
if (less)
PG_RETURN_BOOL(val <= sum);
else
PG_RETURN_BOOL(val >= sum);
}
/* time_part()
* Extract specified field from time type.
*/
Datum
time_part(PG_FUNCTION_ARGS)
{
text *units = PG_GETARG_TEXT_PP(0);
TimeADT time = PG_GETARG_TIMEADT(1);
float8 result;
int type,
val;
char *lowunits;
lowunits = downcase_truncate_identifier(VARDATA_ANY(units),
VARSIZE_ANY_EXHDR(units),
false);
type = DecodeUnits(0, lowunits, &val);
if (type == UNKNOWN_FIELD)
type = DecodeSpecial(0, lowunits, &val);
if (type == UNITS)
{
fsec_t fsec;
struct pg_tm tt,
*tm = &tt;
time2tm(time, tm, &fsec);
switch (val)
{
case DTK_MICROSEC:
result = tm->tm_sec * 1000000.0 + fsec;
break;
case DTK_MILLISEC:
result = tm->tm_sec * 1000.0 + fsec / 1000.0;
break;
case DTK_SECOND:
result = tm->tm_sec + fsec / 1000000.0;
break;
case DTK_MINUTE:
result = tm->tm_min;
break;
case DTK_HOUR:
result = tm->tm_hour;
break;
case DTK_TZ:
case DTK_TZ_MINUTE:
case DTK_TZ_HOUR:
case DTK_DAY:
case DTK_MONTH:
case DTK_QUARTER:
case DTK_YEAR:
case DTK_DECADE:
case DTK_CENTURY:
case DTK_MILLENNIUM:
case DTK_ISOYEAR:
default:
ereport(ERROR,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("\"time\" units \"%s\" not recognized",
lowunits)));
result = 0;
}
}
else if (type == RESERV && val == DTK_EPOCH)
{
result = time / 1000000.0;
}
else
{
ereport(ERROR,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("\"time\" units \"%s\" not recognized",
lowunits)));
result = 0;
}
PG_RETURN_FLOAT8(result);
}
/*****************************************************************************
* Time With Time Zone ADT
*****************************************************************************/
/* tm2timetz()
* Convert a tm structure to a time data type.
*/
static int
tm2timetz(struct pg_tm *tm, fsec_t fsec, int tz, TimeTzADT *result)
{
result->time = ((((tm->tm_hour * MINS_PER_HOUR + tm->tm_min) * SECS_PER_MINUTE) + tm->tm_sec) *
USECS_PER_SEC) + fsec;
result->zone = tz;
return 0;
}
Datum
timetz_in(PG_FUNCTION_ARGS)
{
char *str = PG_GETARG_CSTRING(0);
#ifdef NOT_USED
Oid typelem = PG_GETARG_OID(1);
#endif
int32 typmod = PG_GETARG_INT32(2);
TimeTzADT *result;
fsec_t fsec;
struct pg_tm tt,
*tm = &tt;
int tz;
int nf;
int dterr;
char workbuf[MAXDATELEN + 1];
char *field[MAXDATEFIELDS];
int dtype;
int ftype[MAXDATEFIELDS];
dterr = ParseDateTime(str, workbuf, sizeof(workbuf),
field, ftype, MAXDATEFIELDS, &nf);
if (dterr == 0)
dterr = DecodeTimeOnly(field, ftype, nf, &dtype, tm, &fsec, &tz);
if (dterr != 0)
DateTimeParseError(dterr, str, "time with time zone");
result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
tm2timetz(tm, fsec, tz, result);
AdjustTimeForTypmod(&(result->time), typmod);
PG_RETURN_TIMETZADT_P(result);
}
Datum
timetz_out(PG_FUNCTION_ARGS)
{
TimeTzADT *time = PG_GETARG_TIMETZADT_P(0);
char *result;
struct pg_tm tt,
*tm = &tt;
fsec_t fsec;
int tz;
char buf[MAXDATELEN + 1];
timetz2tm(time, tm, &fsec, &tz);
EncodeTimeOnly(tm, fsec, true, tz, DateStyle, buf);
result = pstrdup(buf);
PG_RETURN_CSTRING(result);
}
/*
* timetz_recv - converts external binary format to timetz
*/
Datum
timetz_recv(PG_FUNCTION_ARGS)
{
StringInfo buf = (StringInfo) PG_GETARG_POINTER(0);
#ifdef NOT_USED
Oid typelem = PG_GETARG_OID(1);
#endif
int32 typmod = PG_GETARG_INT32(2);
TimeTzADT *result;
result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
result->time = pq_getmsgint64(buf);
if (result->time < INT64CONST(0) || result->time > USECS_PER_DAY)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("time out of range")));
result->zone = pq_getmsgint(buf, sizeof(result->zone));
/* Check for sane GMT displacement; see notes in datatype/timestamp.h */
if (result->zone <= -TZDISP_LIMIT || result->zone >= TZDISP_LIMIT)
ereport(ERROR,
(errcode(ERRCODE_INVALID_TIME_ZONE_DISPLACEMENT_VALUE),
errmsg("time zone displacement out of range")));
AdjustTimeForTypmod(&(result->time), typmod);
PG_RETURN_TIMETZADT_P(result);
}
/*
* timetz_send - converts timetz to binary format
*/
Datum
timetz_send(PG_FUNCTION_ARGS)
{
TimeTzADT *time = PG_GETARG_TIMETZADT_P(0);
StringInfoData buf;
pq_begintypsend(&buf);
pq_sendint64(&buf, time->time);
pq_sendint32(&buf, time->zone);
PG_RETURN_BYTEA_P(pq_endtypsend(&buf));
}
Datum
timetztypmodin(PG_FUNCTION_ARGS)
{
ArrayType *ta = PG_GETARG_ARRAYTYPE_P(0);
PG_RETURN_INT32(anytime_typmodin(true, ta));
}
Datum
timetztypmodout(PG_FUNCTION_ARGS)
{
int32 typmod = PG_GETARG_INT32(0);
PG_RETURN_CSTRING(anytime_typmodout(true, typmod));
}
/* timetz2tm()
* Convert TIME WITH TIME ZONE data type to POSIX time structure.
*/
int
timetz2tm(TimeTzADT *time, struct pg_tm *tm, fsec_t *fsec, int *tzp)
{
TimeOffset trem = time->time;
tm->tm_hour = trem / USECS_PER_HOUR;
trem -= tm->tm_hour * USECS_PER_HOUR;
tm->tm_min = trem / USECS_PER_MINUTE;
trem -= tm->tm_min * USECS_PER_MINUTE;
tm->tm_sec = trem / USECS_PER_SEC;
*fsec = trem - tm->tm_sec * USECS_PER_SEC;
if (tzp != NULL)
*tzp = time->zone;
return 0;
}
/* timetz_scale()
* Adjust time type for specified scale factor.
* Used by PostgreSQL type system to stuff columns.
*/
Datum
timetz_scale(PG_FUNCTION_ARGS)
{
TimeTzADT *time = PG_GETARG_TIMETZADT_P(0);
int32 typmod = PG_GETARG_INT32(1);
TimeTzADT *result;
result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
result->time = time->time;
result->zone = time->zone;
AdjustTimeForTypmod(&(result->time), typmod);
PG_RETURN_TIMETZADT_P(result);
}
static int
timetz_cmp_internal(TimeTzADT *time1, TimeTzADT *time2)
{
TimeOffset t1,
t2;
/* Primary sort is by true (GMT-equivalent) time */
t1 = time1->time + (time1->zone * USECS_PER_SEC);
t2 = time2->time + (time2->zone * USECS_PER_SEC);
if (t1 > t2)
return 1;
if (t1 < t2)
return -1;
/*
* If same GMT time, sort by timezone; we only want to say that two
* timetz's are equal if both the time and zone parts are equal.
*/
if (time1->zone > time2->zone)
return 1;
if (time1->zone < time2->zone)
return -1;
return 0;
}
Datum
timetz_eq(PG_FUNCTION_ARGS)
{
TimeTzADT *time1 = PG_GETARG_TIMETZADT_P(0);
TimeTzADT *time2 = PG_GETARG_TIMETZADT_P(1);
PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) == 0);
}
Datum
timetz_ne(PG_FUNCTION_ARGS)
{
TimeTzADT *time1 = PG_GETARG_TIMETZADT_P(0);
TimeTzADT *time2 = PG_GETARG_TIMETZADT_P(1);
PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) != 0);
}
Datum
timetz_lt(PG_FUNCTION_ARGS)
{
TimeTzADT *time1 = PG_GETARG_TIMETZADT_P(0);
TimeTzADT *time2 = PG_GETARG_TIMETZADT_P(1);
PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) < 0);
}
Datum
timetz_le(PG_FUNCTION_ARGS)
{
TimeTzADT *time1 = PG_GETARG_TIMETZADT_P(0);
TimeTzADT *time2 = PG_GETARG_TIMETZADT_P(1);
PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) <= 0);
}
Datum
timetz_gt(PG_FUNCTION_ARGS)
{
TimeTzADT *time1 = PG_GETARG_TIMETZADT_P(0);
TimeTzADT *time2 = PG_GETARG_TIMETZADT_P(1);
PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) > 0);
}
Datum
timetz_ge(PG_FUNCTION_ARGS)
{
TimeTzADT *time1 = PG_GETARG_TIMETZADT_P(0);
TimeTzADT *time2 = PG_GETARG_TIMETZADT_P(1);
PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) >= 0);
}
Datum
timetz_cmp(PG_FUNCTION_ARGS)
{
TimeTzADT *time1 = PG_GETARG_TIMETZADT_P(0);
TimeTzADT *time2 = PG_GETARG_TIMETZADT_P(1);
PG_RETURN_INT32(timetz_cmp_internal(time1, time2));
}
Datum
timetz_hash(PG_FUNCTION_ARGS)
{
TimeTzADT *key = PG_GETARG_TIMETZADT_P(0);
uint32 thash;
/*
* To avoid any problems with padding bytes in the struct, we figure the
* field hashes separately and XOR them.
*/
thash = DatumGetUInt32(DirectFunctionCall1(hashint8,
Int64GetDatumFast(key->time)));
thash ^= DatumGetUInt32(hash_uint32(key->zone));
PG_RETURN_UINT32(thash);
}
Datum
timetz_hash_extended(PG_FUNCTION_ARGS)
{
TimeTzADT *key = PG_GETARG_TIMETZADT_P(0);
Datum seed = PG_GETARG_DATUM(1);
uint64 thash;
/* Same approach as timetz_hash */
thash = DatumGetUInt64(DirectFunctionCall2(hashint8extended,
Int64GetDatumFast(key->time),
seed));
thash ^= DatumGetUInt64(hash_uint32_extended(key->zone,
DatumGetInt64(seed)));
PG_RETURN_UINT64(thash);
}
Datum
timetz_larger(PG_FUNCTION_ARGS)
{
TimeTzADT *time1 = PG_GETARG_TIMETZADT_P(0);
TimeTzADT *time2 = PG_GETARG_TIMETZADT_P(1);
TimeTzADT *result;
if (timetz_cmp_internal(time1, time2) > 0)
result = time1;
else
result = time2;
PG_RETURN_TIMETZADT_P(result);
}
Datum
timetz_smaller(PG_FUNCTION_ARGS)
{
TimeTzADT *time1 = PG_GETARG_TIMETZADT_P(0);
TimeTzADT *time2 = PG_GETARG_TIMETZADT_P(1);
TimeTzADT *result;
if (timetz_cmp_internal(time1, time2) < 0)
result = time1;
else
result = time2;
PG_RETURN_TIMETZADT_P(result);
}
/* timetz_pl_interval()
* Add interval to timetz.
*/
Datum
timetz_pl_interval(PG_FUNCTION_ARGS)
{
TimeTzADT *time = PG_GETARG_TIMETZADT_P(0);
Interval *span = PG_GETARG_INTERVAL_P(1);
TimeTzADT *result;
result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
result->time = time->time + span->time;
result->time -= result->time / USECS_PER_DAY * USECS_PER_DAY;
if (result->time < INT64CONST(0))
result->time += USECS_PER_DAY;
result->zone = time->zone;
PG_RETURN_TIMETZADT_P(result);
}
/* timetz_mi_interval()
* Subtract interval from timetz.
*/
Datum
timetz_mi_interval(PG_FUNCTION_ARGS)
{
TimeTzADT *time = PG_GETARG_TIMETZADT_P(0);
Interval *span = PG_GETARG_INTERVAL_P(1);
TimeTzADT *result;
result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
result->time = time->time - span->time;
result->time -= result->time / USECS_PER_DAY * USECS_PER_DAY;
if (result->time < INT64CONST(0))
result->time += USECS_PER_DAY;
result->zone = time->zone;
PG_RETURN_TIMETZADT_P(result);
}
/*
* in_range support function for timetz.
*/
Datum
in_range_timetz_interval(PG_FUNCTION_ARGS)
{
TimeTzADT *val = PG_GETARG_TIMETZADT_P(0);
TimeTzADT *base = PG_GETARG_TIMETZADT_P(1);
Interval *offset = PG_GETARG_INTERVAL_P(2);
bool sub = PG_GETARG_BOOL(3);
bool less = PG_GETARG_BOOL(4);
TimeTzADT sum;
/*
* Like timetz_pl_interval/timetz_mi_interval, we disregard the month and
* day fields of the offset. So our test for negative should too.
*/
if (offset->time < 0)
ereport(ERROR,
(errcode(ERRCODE_INVALID_PRECEDING_OR_FOLLOWING_SIZE),
errmsg("invalid preceding or following size in window function")));
/*
* We can't use timetz_pl_interval/timetz_mi_interval here, because their
* wraparound behavior would give wrong (or at least undesirable) answers.
* Fortunately the equivalent non-wrapping behavior is trivial, especially
* since we don't worry about integer overflow.
*/
if (sub)
sum.time = base->time - offset->time;
else
sum.time = base->time + offset->time;
sum.zone = base->zone;
if (less)
PG_RETURN_BOOL(timetz_cmp_internal(val, &sum) <= 0);
else
PG_RETURN_BOOL(timetz_cmp_internal(val, &sum) >= 0);
}
/* overlaps_timetz() --- implements the SQL OVERLAPS operator.
*
* Algorithm is per SQL spec. This is much harder than you'd think
* because the spec requires us to deliver a non-null answer in some cases
* where some of the inputs are null.
*/
Datum
overlaps_timetz(PG_FUNCTION_ARGS)
{
/*
* The arguments are TimeTzADT *, but we leave them as generic Datums for
* convenience of notation --- and to avoid dereferencing nulls.
*/
Datum ts1 = PG_GETARG_DATUM(0);
Datum te1 = PG_GETARG_DATUM(1);
Datum ts2 = PG_GETARG_DATUM(2);
Datum te2 = PG_GETARG_DATUM(3);
bool ts1IsNull = PG_ARGISNULL(0);
bool te1IsNull = PG_ARGISNULL(1);
bool ts2IsNull = PG_ARGISNULL(2);
bool te2IsNull = PG_ARGISNULL(3);
#define TIMETZ_GT(t1,t2) \
DatumGetBool(DirectFunctionCall2(timetz_gt,t1,t2))
#define TIMETZ_LT(t1,t2) \
DatumGetBool(DirectFunctionCall2(timetz_lt,t1,t2))
/*
* If both endpoints of interval 1 are null, the result is null (unknown).
* If just one endpoint is null, take ts1 as the non-null one. Otherwise,
* take ts1 as the lesser endpoint.
*/
if (ts1IsNull)
{
if (te1IsNull)
PG_RETURN_NULL();
/* swap null for non-null */
ts1 = te1;
te1IsNull = true;
}
else if (!te1IsNull)
{
if (TIMETZ_GT(ts1, te1))
{
Datum tt = ts1;
ts1 = te1;
te1 = tt;
}
}
/* Likewise for interval 2. */
if (ts2IsNull)
{
if (te2IsNull)
PG_RETURN_NULL();
/* swap null for non-null */
ts2 = te2;
te2IsNull = true;
}
else if (!te2IsNull)
{
if (TIMETZ_GT(ts2, te2))
{
Datum tt = ts2;
ts2 = te2;
te2 = tt;
}
}
/*
* At this point neither ts1 nor ts2 is null, so we can consider three
* cases: ts1 > ts2, ts1 < ts2, ts1 = ts2
*/
if (TIMETZ_GT(ts1, ts2))
{
/*
* This case is ts1 < te2 OR te1 < te2, which may look redundant but
* in the presence of nulls it's not quite completely so.
*/
if (te2IsNull)
PG_RETURN_NULL();
if (TIMETZ_LT(ts1, te2))
PG_RETURN_BOOL(true);
if (te1IsNull)
PG_RETURN_NULL();
/*
* If te1 is not null then we had ts1 <= te1 above, and we just found
* ts1 >= te2, hence te1 >= te2.
*/
PG_RETURN_BOOL(false);
}
else if (TIMETZ_LT(ts1, ts2))
{
/* This case is ts2 < te1 OR te2 < te1 */
if (te1IsNull)
PG_RETURN_NULL();
if (TIMETZ_LT(ts2, te1))
PG_RETURN_BOOL(true);
if (te2IsNull)
PG_RETURN_NULL();
/*
* If te2 is not null then we had ts2 <= te2 above, and we just found
* ts2 >= te1, hence te2 >= te1.
*/
PG_RETURN_BOOL(false);
}
else
{
/*
* For ts1 = ts2 the spec says te1 <> te2 OR te1 = te2, which is a
* rather silly way of saying "true if both are nonnull, else null".
*/
if (te1IsNull || te2IsNull)
PG_RETURN_NULL();
PG_RETURN_BOOL(true);
}
#undef TIMETZ_GT
#undef TIMETZ_LT
}
Datum
timetz_time(PG_FUNCTION_ARGS)
{
TimeTzADT *timetz = PG_GETARG_TIMETZADT_P(0);
TimeADT result;
/* swallow the time zone and just return the time */
result = timetz->time;
PG_RETURN_TIMEADT(result);
}
Datum
time_timetz(PG_FUNCTION_ARGS)
{
TimeADT time = PG_GETARG_TIMEADT(0);
TimeTzADT *result;
struct pg_tm tt,
*tm = &tt;
fsec_t fsec;
int tz;
GetCurrentDateTime(tm);
time2tm(time, tm, &fsec);
tz = DetermineTimeZoneOffset(tm, session_timezone);
result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
result->time = time;
result->zone = tz;
PG_RETURN_TIMETZADT_P(result);
}
/* timestamptz_timetz()
* Convert timestamp to timetz data type.
*/
Datum
timestamptz_timetz(PG_FUNCTION_ARGS)
{
TimestampTz timestamp = PG_GETARG_TIMESTAMP(0);
TimeTzADT *result;
struct pg_tm tt,
*tm = &tt;
int tz;
fsec_t fsec;
if (TIMESTAMP_NOT_FINITE(timestamp))
PG_RETURN_NULL();
if (timestamp2tm(timestamp, &tz, tm, &fsec, NULL, NULL) != 0)
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("timestamp out of range")));
result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
tm2timetz(tm, fsec, tz, result);
PG_RETURN_TIMETZADT_P(result);
}
/* datetimetz_timestamptz()
* Convert date and timetz to timestamp with time zone data type.
* Timestamp is stored in GMT, so add the time zone
* stored with the timetz to the result.
* - thomas 2000-03-10
*/
Datum
datetimetz_timestamptz(PG_FUNCTION_ARGS)
{
DateADT date = PG_GETARG_DATEADT(0);
TimeTzADT *time = PG_GETARG_TIMETZADT_P(1);
TimestampTz result;
if (DATE_IS_NOBEGIN(date))
TIMESTAMP_NOBEGIN(result);
else if (DATE_IS_NOEND(date))
TIMESTAMP_NOEND(result);
else
{
/*
* Date's range is wider than timestamp's, so check for boundaries.
* Since dates have the same minimum values as timestamps, only upper
* boundary need be checked for overflow.
*/
if (date >= (TIMESTAMP_END_JULIAN - POSTGRES_EPOCH_JDATE))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range for timestamp")));
result = date * USECS_PER_DAY + time->time + time->zone * USECS_PER_SEC;
/*
* Since it is possible to go beyond allowed timestamptz range because
* of time zone, check for allowed timestamp range after adding tz.
*/
if (!IS_VALID_TIMESTAMP(result))
ereport(ERROR,
(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
errmsg("date out of range for timestamp")));
}
PG_RETURN_TIMESTAMP(result);
}
/* timetz_part()
* Extract specified field from time type.
*/
Datum
timetz_part(PG_FUNCTION_ARGS)
{
text *units = PG_GETARG_TEXT_PP(0);
TimeTzADT *time = PG_GETARG_TIMETZADT_P(1);
float8 result;
int type,
val;
char *lowunits;
lowunits = downcase_truncate_identifier(VARDATA_ANY(units),
VARSIZE_ANY_EXHDR(units),
false);
type = DecodeUnits(0, lowunits, &val);
if (type == UNKNOWN_FIELD)
type = DecodeSpecial(0, lowunits, &val);
if (type == UNITS)
{
double dummy;
int tz;
fsec_t fsec;
struct pg_tm tt,
*tm = &tt;
timetz2tm(time, tm, &fsec, &tz);
switch (val)
{
case DTK_TZ:
result = -tz;
break;
case DTK_TZ_MINUTE:
result = -tz;
result /= SECS_PER_MINUTE;
FMODULO(result, dummy, (double) SECS_PER_MINUTE);
break;
case DTK_TZ_HOUR:
dummy = -tz;
FMODULO(dummy, result, (double) SECS_PER_HOUR);
break;
case DTK_MICROSEC:
result = tm->tm_sec * 1000000.0 + fsec;
break;
case DTK_MILLISEC:
result = tm->tm_sec * 1000.0 + fsec / 1000.0;
break;
case DTK_SECOND:
result = tm->tm_sec + fsec / 1000000.0;
break;
case DTK_MINUTE:
result = tm->tm_min;
break;
case DTK_HOUR:
result = tm->tm_hour;
break;
case DTK_DAY:
case DTK_MONTH:
case DTK_QUARTER:
case DTK_YEAR:
case DTK_DECADE:
case DTK_CENTURY:
case DTK_MILLENNIUM:
default:
ereport(ERROR,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("\"time with time zone\" units \"%s\" not recognized",
lowunits)));
result = 0;
}
}
else if (type == RESERV && val == DTK_EPOCH)
{
result = time->time / 1000000.0 + time->zone;
}
else
{
ereport(ERROR,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("\"time with time zone\" units \"%s\" not recognized",
lowunits)));
result = 0;
}
PG_RETURN_FLOAT8(result);
}
/* timetz_zone()
* Encode time with time zone type with specified time zone.
* Applies DST rules as of the current date.
*/
Datum
timetz_zone(PG_FUNCTION_ARGS)
{
text *zone = PG_GETARG_TEXT_PP(0);
TimeTzADT *t = PG_GETARG_TIMETZADT_P(1);
TimeTzADT *result;
int tz;
char tzname[TZ_STRLEN_MAX + 1];
char *lowzone;
int type,
val;
pg_tz *tzp;
/*
* Look up the requested timezone. First we look in the timezone
* abbreviation table (to handle cases like "EST"), and if that fails, we
* look in the timezone database (to handle cases like
* "America/New_York"). (This matches the order in which timestamp input
* checks the cases; it's important because the timezone database unwisely
* uses a few zone names that are identical to offset abbreviations.)
*/
text_to_cstring_buffer(zone, tzname, sizeof(tzname));
/* DecodeTimezoneAbbrev requires lowercase input */
lowzone = downcase_truncate_identifier(tzname,
strlen(tzname),
false);
type = DecodeTimezoneAbbrev(0, lowzone, &val, &tzp);
if (type == TZ || type == DTZ)
{
/* fixed-offset abbreviation */
tz = -val;
}
else if (type == DYNTZ)
{
/* dynamic-offset abbreviation, resolve using current time */
pg_time_t now = (pg_time_t) time(NULL);
struct pg_tm *tm;
tm = pg_localtime(&now, tzp);
tz = DetermineTimeZoneAbbrevOffset(tm, tzname, tzp);
}
else
{
/* try it as a full zone name */
tzp = pg_tzset(tzname);
if (tzp)
{
/* Get the offset-from-GMT that is valid today for the zone */
pg_time_t now = (pg_time_t) time(NULL);
struct pg_tm *tm;
tm = pg_localtime(&now, tzp);
tz = -tm->tm_gmtoff;
}
else
{
ereport(ERROR,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("time zone \"%s\" not recognized", tzname)));
tz = 0; /* keep compiler quiet */
}
}
result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
result->time = t->time + (t->zone - tz) * USECS_PER_SEC;
while (result->time < INT64CONST(0))
result->time += USECS_PER_DAY;
while (result->time >= USECS_PER_DAY)
result->time -= USECS_PER_DAY;
result->zone = tz;
PG_RETURN_TIMETZADT_P(result);
}
/* timetz_izone()
* Encode time with time zone type with specified time interval as time zone.
*/
Datum
timetz_izone(PG_FUNCTION_ARGS)
{
Interval *zone = PG_GETARG_INTERVAL_P(0);
TimeTzADT *time = PG_GETARG_TIMETZADT_P(1);
TimeTzADT *result;
int tz;
if (zone->month != 0 || zone->day != 0)
ereport(ERROR,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("interval time zone \"%s\" must not include months or days",
DatumGetCString(DirectFunctionCall1(interval_out,
PointerGetDatum(zone))))));
tz = -(zone->time / USECS_PER_SEC);
result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
result->time = time->time + (time->zone - tz) * USECS_PER_SEC;
while (result->time < INT64CONST(0))
result->time += USECS_PER_DAY;
while (result->time >= USECS_PER_DAY)
result->time -= USECS_PER_DAY;
result->zone = tz;
PG_RETURN_TIMETZADT_P(result);
}
相关信息
相关文章
0
赞
热门推荐
-
2、 - 优质文章
-
3、 gate.io
-
8、 golang
-
9、 openharmony
-
10、 Vue中input框自动聚焦