greenplumn postmaster 源码
greenplumn postmaster 代码
文件路径：/src/backend/postmaster/postmaster.c
/*-------------------------------------------------------------------------
*
* postmaster.c
* This program acts as a clearing house for requests to the
* POSTGRES system. Frontend programs send a startup message
* to the Postmaster and the postmaster uses the info in the
* message to setup a backend process.
*
* The postmaster also manages system-wide operations such as
* startup and shutdown. The postmaster itself doesn't do those
* operations, mind you --- it just forks off a subprocess to do them
* at the right times. It also takes care of resetting the system
* if a backend crashes.
*
* The postmaster process creates the shared memory and semaphore
* pools during startup, but as a rule does not touch them itself.
* In particular, it is not a member of the PGPROC array of backends
* and so it cannot participate in lock-manager operations. Keeping
* the postmaster away from shared memory operations makes it simpler
* and more reliable. The postmaster is almost always able to recover
* from crashes of individual backends by resetting shared memory;
* if it did much with shared memory then it would be prone to crashing
* along with the backends.
*
* When a request message is received, we now fork() immediately.
* The child process performs authentication of the request, and
* then becomes a backend if successful. This allows the auth code
* to be written in a simple single-threaded style (as opposed to the
* crufty "poor man's multitasking" code that used to be needed).
* More importantly, it ensures that blockages in non-multithreaded
* libraries like SSL or PAM cannot cause denial of service to other
* clients.
*
*
* Portions Copyright (c) 2005-2009, Greenplum inc
* Portions Copyright (c) 2012-Present VMware, Inc. or its affiliates.
* Portions Copyright (c) 1996-2019, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
*
* IDENTIFICATION
* src/backend/postmaster/postmaster.c
*
* NOTES
*
* Initialization:
* The Postmaster sets up shared memory data structures
* for the backends.
*
* Synchronization:
* The Postmaster shares memory with the backends but should avoid
* touching shared memory, so as not to become stuck if a crashing
* backend screws up locks or shared memory. Likewise, the Postmaster
* should never block on messages from frontend clients.
*
* Garbage Collection:
* The Postmaster cleans up after backends if they have an emergency
* exit and/or core dump.
*
* Error Reporting:
* Use write_stderr() only for reporting "interactive" errors
* (essentially, bogus arguments on the command line). Once the
* postmaster is launched, use ereport().
*
*-------------------------------------------------------------------------
*/
#include "postgres.h"
#include <unistd.h>
#include <signal.h>
#include <time.h>
#include <sys/wait.h>
#include <ctype.h>
#include <sys/stat.h>
#include <sys/socket.h>
#include <fcntl.h>
#include <sys/param.h>
#include <netdb.h>
#include <limits.h>
#include "access/xlog.h"
/* headers required for process affinity bindings */
#ifdef HAVE_NUMA_H
#define NUMA_VERSION1_COMPATIBILITY 1
#include <numa.h>
#endif
#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif
#ifdef USE_BONJOUR
#include <dns_sd.h>
#endif
#ifdef USE_SYSTEMD
#include <systemd/sd-daemon.h>
#endif
#ifdef HAVE_PTHREAD_IS_THREADED_NP
#include <pthread.h>
#endif
#include "access/transam.h"
#include "access/xlog.h"
#include "bootstrap/bootstrap.h"
#include "catalog/pg_control.h"
#include "common/file_perm.h"
#include "common/ip.h"
#include "common/string.h"
#include "lib/ilist.h"
#include "libpq/auth.h"
#include "libpq/libpq.h"
#include "libpq/pqformat.h"
#include "libpq/pqsignal.h"
#include "miscadmin.h"
#include "pg_getopt.h"
#include "pgstat.h"
#include "port/pg_bswap.h"
#include "postmaster/autovacuum.h"
#include "postmaster/bgworker_internals.h"
#include "postmaster/bgwriter.h"
#include "postmaster/fork_process.h"
#include "postmaster/pgarch.h"
#include "postmaster/postmaster.h"
#include "postmaster/fts.h"
#include "postmaster/syslogger.h"
#include "postmaster/backoff.h"
#include "postmaster/bgworker.h"
#include "replication/logicallauncher.h"
#include "replication/walsender.h"
#include "storage/fd.h"
#include "storage/ipc.h"
#include "storage/pg_shmem.h"
#include "storage/pmsignal.h"
#include "storage/proc.h"
#include "storage/procsignal.h"
#include "tcop/tcopprot.h"
#include "utils/builtins.h"
#include "utils/datetime.h"
#include "utils/faultinjector.h"
#include "utils/gdd.h"
#include "utils/memutils.h"
#include "utils/pidfile.h"
#include "utils/ps_status.h"
#include "utils/timeout.h"
#include "utils/timestamp.h"
#include "utils/varlena.h"
#include "cdb/cdbgang.h" /* cdbgang_parse_gpqeid_params */
#include "cdb/cdbtm.h"
#include "cdb/cdbvars.h"
#include "cdb/cdbendpoint.h"
#include "cdb/ic_proxy_bgworker.h"
#include "utils/metrics_utils.h"
/*
* This is set in backends that are handling a GPDB specific message (FTS or
* fault injector) on mirror.
*/
bool am_mirror = false;
/* GPDB specific flag to handle deadlocks during parallel segment start. */
volatile bool *pm_launch_walreceiver = NULL;
/*
* Possible types of a backend. Beyond being the possible bkend_type values in
* struct bkend, these are OR-able request flag bits for SignalSomeChildren()
* and CountChildren().
*/
#define BACKEND_TYPE_NORMAL 0x0001 /* normal backend */
#define BACKEND_TYPE_AUTOVAC 0x0002 /* autovacuum worker process */
#define BACKEND_TYPE_WALSND 0x0004 /* walsender process */
#define BACKEND_TYPE_BGWORKER 0x0008 /* bgworker process */
#define BACKEND_TYPE_ALL 0x000F /* OR of all the above */
#define BACKEND_TYPE_WORKER (BACKEND_TYPE_AUTOVAC | BACKEND_TYPE_BGWORKER)
/*
* List of active backends (or child processes anyway; we don't actually
* know whether a given child has become a backend or is still in the
* authorization phase). This is used mainly to keep track of how many
* children we have and send them appropriate signals when necessary.
*
* "Special" children such as the startup, bgwriter and autovacuum launcher
* tasks are not in this list. Autovacuum worker and walsender are in it.
* Also, "dead_end" children are in it: these are children launched just for
* the purpose of sending a friendly rejection message to a would-be client.
* We must track them because they are attached to shared memory, but we know
* they will never become live backends. dead_end children are not assigned a
* PMChildSlot.
*
* Background workers are in this list, too.
*/
typedef struct bkend
{
pid_t pid; /* process id of backend */
int32 cancel_key; /* cancel key for cancels for this backend */
int child_slot; /* PMChildSlot for this backend, if any */
/*
* Flavor of backend or auxiliary process. Note that BACKEND_TYPE_WALSND
* backends initially announce themselves as BACKEND_TYPE_NORMAL, so if
* bkend_type is normal, you should check for a recent transition.
*/
int bkend_type;
bool dead_end; /* is it going to send an error and quit? */
bool bgworker_notify; /* gets bgworker start/stop notifications */
dlist_node elem; /* list link in BackendList */
} Backend;
static dlist_head BackendList = DLIST_STATIC_INIT(BackendList);
#ifdef EXEC_BACKEND
static Backend *ShmemBackendArray;
#endif
BackgroundWorker *MyBgworkerEntry = NULL;
/* The socket number we are listening for connections on */
int PostPortNumber;
/* The directory names for Unix socket(s) */
char *Unix_socket_directories;
/* The TCP listen address(es) */
char *ListenAddresses;
/*
* The interconnect address. We assume the interconnect is the address
* in gp_segment_configuration. And it's never changed at runtime.
*/
char *interconnect_address = NULL;
/*
* ReservedBackends is the number of backends reserved for superuser use.
* This number is taken out of the pool size given by MaxConnections so
* number of backend slots available to non-superusers is
* (MaxConnections - ReservedBackends). Note what this really means is
* "if there are <= ReservedBackends connections available, only superusers
* can make new connections" --- pre-existing superuser connections don't
* count against the limit.
*/
int ReservedBackends;
/* The socket(s) we're listening to. */
#define MAXLISTEN 64
static pgsocket ListenSocket[MAXLISTEN];
/*
* Set by the -o option
*/
static char ExtraOptions[MAXPGPATH];
/*
* These globals control the behavior of the postmaster in case some
* backend dumps core. Normally, it kills all peers of the dead backend
* and reinitializes shared memory. By specifying -s or -n, we can have
* the postmaster stop (rather than kill) peers and not reinitialize
* shared data structures. (Reinit is currently dead code, though.)
*/
static bool Reinit = true;
static int SendStop = false;
/* still more option variables */
bool EnableSSL = false;
int PreAuthDelay = 0;
int AuthenticationTimeout = 60;
bool log_hostname; /* for ps display and logging */
bool Log_connections = false;
bool Db_user_namespace = false;
bool enable_bonjour = false;
char *bonjour_name;
bool restart_after_crash = true;
/*
* PIDs of special child processes; 0 when not running. When adding a new PID
* to the list, remember to add the process title to GetServerProcessTitle()
* as well.
*/
static pid_t StartupPID = 0,
BgWriterPID = 0,
CheckpointerPID = 0,
WalWriterPID = 0,
WalReceiverPID = 0,
AutoVacPID = 0,
PgArchPID = 0,
PgStatPID = 0,
SysLoggerPID = 0;
/* Startup process's status */
typedef enum
{
STARTUP_NOT_RUNNING,
STARTUP_RUNNING,
STARTUP_SIGNALED, /* we sent it a SIGQUIT or SIGKILL */
STARTUP_CRASHED
} StartupStatusEnum;
static StartupStatusEnum StartupStatus = STARTUP_NOT_RUNNING;
/* Startup/shutdown state */
#define NoShutdown 0
#define SmartShutdown 1
#define FastShutdown 2
#define ImmediateShutdown 3
static int Shutdown = NoShutdown;
static bool FatalError = false; /* T if recovering from backend crash */
/*
* We use a simple state machine to control startup, shutdown, and
* crash recovery (which is rather like shutdown followed by startup).
*
* After doing all the postmaster initialization work, we enter PM_STARTUP
* state and the startup process is launched. The startup process begins by
* reading the control file and other preliminary initialization steps.
* In a normal startup, or after crash recovery, the startup process exits
* with exit code 0 and we switch to PM_RUN state. However, archive recovery
* is handled specially since it takes much longer and we would like to support
* hot standby during archive recovery.
*
* When the startup process is ready to start archive recovery, it signals the
* postmaster, and we switch to PM_RECOVERY state. The background writer and
* checkpointer are launched, while the startup process continues applying WAL.
* If Hot Standby is enabled, then, after reaching a consistent point in WAL
* redo, startup process signals us again, and we switch to PM_HOT_STANDBY
* state and begin accepting connections to perform read-only queries. When
* archive recovery is finished, the startup process exits with exit code 0
* and we switch to PM_RUN state.
*
* Normal child backends can only be launched when we are in PM_RUN or
* PM_HOT_STANDBY state. (We also allow launch of normal
* child backends in PM_WAIT_BACKUP state, but only for superusers.)
* In other states we handle connection requests by launching "dead_end"
* child processes, which will simply send the client an error message and
* quit. (We track these in the BackendList so that we can know when they
* are all gone; this is important because they're still connected to shared
* memory, and would interfere with an attempt to destroy the shmem segment,
* possibly leading to SHMALL failure when we try to make a new one.)
* In PM_WAIT_DEAD_END state we are waiting for all the dead_end children
* to drain out of the system, and therefore stop accepting connection
* requests at all until the last existing child has quit (which hopefully
* will not be very long).
*
* Notice that this state variable does not distinguish *why* we entered
* states later than PM_RUN --- Shutdown and FatalError must be consulted
* to find that out. FatalError is never true in PM_INIT through PM_RUN
* states, nor in PM_SHUTDOWN states (because we don't enter those states
* when trying to recover from a crash). It can be true in PM_STARTUP state,
* because we don't clear it until we've successfully started WAL redo.
*/
typedef enum
{
PM_INIT, /* postmaster starting */
PM_STARTUP, /* waiting for startup subprocess */
PM_RECOVERY, /* in archive recovery mode */
PM_HOT_STANDBY, /* in hot standby mode */
PM_RUN, /* normal "database is alive" state */
PM_WAIT_BACKUP, /* waiting for online backup mode to end */
PM_WAIT_READONLY, /* waiting for read only backends to exit */
PM_WAIT_BACKENDS, /* waiting for live backends to exit */
PM_SHUTDOWN, /* waiting for checkpointer to do shutdown
* ckpt */
PM_SHUTDOWN_2, /* waiting for archiver and walsenders to
* finish */
PM_WAIT_DEAD_END, /* waiting for dead_end children to exit */
PM_NO_CHILDREN /* all important children have exited */
} PMState;
static PMState pmState = PM_INIT;
/* Start time of SIGKILL timeout during immediate shutdown or child crash */
/* Zero means timeout is not running */
static time_t AbortStartTime = 0;
/* Length of said timeout */
#define SIGKILL_CHILDREN_AFTER_SECS 5
/* Set at database system is ready to accept connections */
pg_time_t PMAcceptingConnectionsStartTime = 0;
static BackgroundWorker PMAuxProcList[MaxPMAuxProc] =
{
{"ftsprobe process", "ftsprobe process",
BGWORKER_SHMEM_ACCESS | BGWORKER_BACKEND_DATABASE_CONNECTION,
BgWorkerStart_DtxRecovering, /* no need to wait dtx recovery */
0, /* restart immediately if ftsprobe exits with non-zero code */
"postgres", "FtsProbeMain", 0, {0}, 0,
FtsProbeStartRule},
{"global deadlock detector process", "global deadlock detector process",
BGWORKER_SHMEM_ACCESS | BGWORKER_BACKEND_DATABASE_CONNECTION,
BgWorkerStart_RecoveryFinished,
0, /* restart immediately if gdd exits with non-zero code */
"postgres", "GlobalDeadLockDetectorMain", 0, {0}, 0,
GlobalDeadLockDetectorStartRule},
{"dtx recovery process", "dtx recovery process",
BGWORKER_SHMEM_ACCESS | BGWORKER_BACKEND_DATABASE_CONNECTION,
BgWorkerStart_DtxRecovering, /* no need to wait dtx recovery */
0, /* restart immediately if dtx recovery process exits with non-zero code */
"postgres", "DtxRecoveryMain", 0, {0}, 0,
DtxRecoveryStartRule},
{"sweeper process", "sweeper process",
BGWORKER_SHMEM_ACCESS,
BgWorkerStart_RecoveryFinished,
0, /* restart immediately if sweeper process exits with non-zero code */
"postgres", "BackoffSweeperMain", 0, {0}, 0,
BackoffSweeperStartRule},
#ifdef ENABLE_IC_PROXY
{"ic proxy process", "ic proxy process",
0,
BgWorkerStart_RecoveryFinished,
0, /* restart immediately if ic proxy process exits with non-zero code */
"postgres", "ICProxyMain", 0, {0}, 0,
ICProxyStartRule},
#endif /* ENABLE_IC_PROXY */
/*
* Remember to set the MaxPMAuxProc to the number of items in this list
*
* It's used as a number at other places, so end-of-list marker doesn't
* work here.
*/
};
static bool ReachedNormalRunning = false; /* T if we've reached PM_RUN */
bool ClientAuthInProgress = false; /* T during new-client
* authentication */
bool redirection_done = false; /* stderr redirected for syslogger? */
/* received START_AUTOVAC_LAUNCHER signal */
static volatile sig_atomic_t start_autovac_launcher = false;
/* the launcher needs to be signalled to communicate some condition */
static volatile bool avlauncher_needs_signal = false;
/* received START_WALRECEIVER signal */
static volatile sig_atomic_t WalReceiverRequested = false;
/* set when there's a worker that needs to be started up */
static volatile bool StartWorkerNeeded = true;
static volatile bool HaveCrashedWorker = false;
#ifdef USE_SSL
/* Set when and if SSL has been initialized properly */
static bool LoadedSSL = false;
#endif
/* some GUC values used in fetching status from status transition */
extern char *locale_monetary;
extern char *locale_numeric;
#ifdef USE_BONJOUR
static DNSServiceRef bonjour_sdref = NULL;
#endif
/*
* postmaster.c - function prototypes
*/
static void CloseServerPorts(int status, Datum arg);
static void unlink_external_pid_file(int status, Datum arg);
static void getInstallationPaths(const char *argv0);
static void checkControlFile(void);
static void checkPgDir(const char *dir);
static Port *ConnCreate(int serverFd);
static void ConnFree(Port *port);
/**
* @param isReset if true, then this is a reset (as opposed to the initial creation of shared memory on startup)
*/
static void reset_shared(int port);
static void SIGHUP_handler(SIGNAL_ARGS);
static void pmdie(SIGNAL_ARGS);
static void reaper(SIGNAL_ARGS);
static void sigusr1_handler(SIGNAL_ARGS);
static void startup_die(SIGNAL_ARGS);
static void dummy_handler(SIGNAL_ARGS);
static void StartupPacketTimeoutHandler(void);
static void CleanupBackend(int pid, int exitstatus);
static bool CleanupBackgroundWorker(int pid, int exitstatus);
static void HandleChildCrash(int pid, int exitstatus, const char *procname);
static void LogChildExit(int lev, const char *procname,
int pid, int exitstatus);
static void PostmasterStateMachine(void);
static void BackendInitialize(Port *port);
static void BackendRun(Port *port) pg_attribute_noreturn();
static void ExitPostmaster(int status) pg_attribute_noreturn();
static int ServerLoop(void);
static int BackendStartup(Port *port);
static int ProcessStartupPacket(Port *port, bool secure_done);
static void SendNegotiateProtocolVersion(List *unrecognized_protocol_options);
static void processCancelRequest(Port *port, void *pkt, MsgType code);
static int initMasks(fd_set *rmask);
static void report_fork_failure_to_client(Port *port, int errnum);
static CAC_state canAcceptConnections(void);
static bool RandomCancelKey(int32 *cancel_key);
static void signal_child(pid_t pid, int signal);
static bool SignalSomeChildren(int signal, int targets);
static void TerminateChildren(int signal);
#define SignalChildren(sig) SignalSomeChildren(sig, BACKEND_TYPE_ALL)
static int CountChildren(int target);
static bool assign_backendlist_entry(RegisteredBgWorker *rw);
static void maybe_start_bgworkers(void);
static bool CreateOptsFile(int argc, char *argv[], char *fullprogname);
static pid_t StartChildProcess(AuxProcType type);
static void StartAutovacuumWorker(void);
static void MaybeStartWalReceiver(void);
static void InitPostmasterDeathWatchHandle(void);
static void setProcAffinity(int id);
/*
* Archiver is allowed to start up at the current postmaster state?
*
* If WAL archiving is enabled always, we are allowed to start archiver
* even during recovery.
*/
#define PgArchStartupAllowed() \
((XLogArchivingActive() && pmState == PM_RUN) || \
(XLogArchivingAlways() && \
(pmState == PM_RECOVERY || pmState == PM_HOT_STANDBY)))
bool isAuxiliaryBgWorker(BackgroundWorker *worker);
#ifdef EXEC_BACKEND
#ifdef WIN32
#define WNOHANG 0 /* ignored, so any integer value will do */
static pid_t waitpid(pid_t pid, int *exitstatus, int options);
static void WINAPI pgwin32_deadchild_callback(PVOID lpParameter, BOOLEAN TimerOrWaitFired);
static HANDLE win32ChildQueue;
typedef struct
{
HANDLE waitHandle;
HANDLE procHandle;
DWORD procId;
} win32_deadchild_waitinfo;
#endif /* WIN32 */
static pid_t backend_forkexec(Port *port);
static pid_t internal_forkexec(int argc, char *argv[], Port *port);
/* Type for a socket that can be inherited to a client process */
#ifdef WIN32
typedef struct
{
SOCKET origsocket; /* Original socket value, or PGINVALID_SOCKET
* if not a socket */
WSAPROTOCOL_INFO wsainfo;
} InheritableSocket;
#else
typedef int InheritableSocket;
#endif
/*
* Structure contains all variables passed to exec:ed backends
*/
typedef struct
{
Port port;
InheritableSocket portsocket;
char DataDir[MAXPGPATH];
pgsocket ListenSocket[MAXLISTEN];
int32 MyCancelKey;
int MyPMChildSlot;
#ifndef WIN32
unsigned long UsedShmemSegID;
#else
void *ShmemProtectiveRegion;
HANDLE UsedShmemSegID;
#endif
void *UsedShmemSegAddr;
slock_t *ShmemLock;
VariableCache ShmemVariableCache;
Backend *ShmemBackendArray;
#ifndef HAVE_SPINLOCKS
PGSemaphore *SpinlockSemaArray;
#endif
int NamedLWLockTrancheRequests;
NamedLWLockTranche *NamedLWLockTrancheArray;
LWLockPadded *MainLWLockArray;
slock_t *ProcStructLock;
PROC_HDR *ProcGlobal;
PGPROC *AuxiliaryProcs;
PGPROC *PreparedXactProcs;
PMSignalData *PMSignalState;
InheritableSocket pgStatSock;
pid_t PostmasterPid;
TimestampTz PgStartTime;
TimestampTz PgReloadTime;
pg_time_t first_syslogger_file_time;
bool redirection_done;
bool IsBinaryUpgrade;
bool ConvertMasterDataDirToSegment;
int max_safe_fds;
int MaxBackends;
#ifdef WIN32
HANDLE PostmasterHandle;
HANDLE initial_signal_pipe;
HANDLE syslogPipe[2];
#else
int postmaster_alive_fds[2];
int syslogPipe[2];
#endif
char my_exec_path[MAXPGPATH];
char pkglib_path[MAXPGPATH];
char ExtraOptions[MAXPGPATH];
} BackendParameters;
static void read_backend_variables(char *id, Port *port);
static void restore_backend_variables(BackendParameters *param, Port *port);
#ifndef WIN32
static bool save_backend_variables(BackendParameters *param, Port *port);
#else
static bool save_backend_variables(BackendParameters *param, Port *port,
HANDLE childProcess, pid_t childPid);
#endif
static void ShmemBackendArrayAdd(Backend *bn);
static void ShmemBackendArrayRemove(Backend *bn);
#endif /* EXEC_BACKEND */
#define StartupDataBase() StartChildProcess(StartupProcess)
#define StartBackgroundWriter() StartChildProcess(BgWriterProcess)
#define StartCheckpointer() StartChildProcess(CheckpointerProcess)
#define StartWalWriter() StartChildProcess(WalWriterProcess)
#define StartWalReceiver() StartChildProcess(WalReceiverProcess)
/* Macros to check exit status of a child process */
#define EXIT_STATUS_0(st) ((st) == 0)
#define EXIT_STATUS_1(st) (WIFEXITED(st) && WEXITSTATUS(st) == 1)
#define EXIT_STATUS_3(st) (WIFEXITED(st) && WEXITSTATUS(st) == 3)
#ifndef WIN32
/*
* File descriptors for pipe used to monitor if postmaster is alive.
* First is POSTMASTER_FD_WATCH, second is POSTMASTER_FD_OWN.
*/
int postmaster_alive_fds[2] = {-1, -1};
#else
/* Process handle of postmaster used for the same purpose on Windows */
HANDLE PostmasterHandle;
#endif
/*
* query info collector hook
* Use this hook to collect real-time query information and status data.
*/
query_info_collect_hook_type query_info_collect_hook = NULL;
/*
* Postmaster main entry point
*/
void
PostmasterMain(int argc, char *argv[])
{
int opt;
int status;
char *userDoption = NULL;
bool listen_addr_saved = false;
int i;
char *output_config_variable = NULL;
InitProcessGlobals();
PostmasterPid = MyProcPid;
IsPostmasterEnvironment = true;
/*
* We should not be creating any files or directories before we check the
* data directory (see checkDataDir()), but just in case set the umask to
* the most restrictive (owner-only) permissions.
*
* checkDataDir() will reset the umask based on the data directory
* permissions.
*/
umask(PG_MODE_MASK_OWNER);
/*
* Initialize random(3) so we don't get the same values in every run.
*
* Note: the seed is pretty predictable from externally-visible facts such
* as postmaster start time, so avoid using random() for security-critical
* random values during postmaster startup. At the time of first
* connection, PostmasterRandom will select a hopefully-more-random seed.
*/
srandom((unsigned int) (MyProcPid ^ MyStartTime));
/*
* By default, palloc() requests in the postmaster will be allocated in
* the PostmasterContext, which is space that can be recycled by backends.
* Allocated data that needs to be available to backends should be
* allocated in TopMemoryContext.
*/
PostmasterContext = AllocSetContextCreate(TopMemoryContext,
"Postmaster",
ALLOCSET_DEFAULT_SIZES);
MemoryContextSwitchTo(PostmasterContext);
/* Initialize paths to installation files */
getInstallationPaths(argv[0]);
/*
* Set up signal handlers for the postmaster process.
*
* In the postmaster, we want to install non-ignored handlers *without*
* SA_RESTART. This is because they'll be blocked at all times except
* when ServerLoop is waiting for something to happen, and during that
* window, we want signals to exit the select(2) wait so that ServerLoop
* can respond if anything interesting happened. On some platforms,
* signals marked SA_RESTART would not cause the select() wait to end.
* Child processes will generally want SA_RESTART, but we expect them to
* set up their own handlers before unblocking signals.
*
* CAUTION: when changing this list, check for side-effects on the signal
* handling setup of child processes. See tcop/postgres.c,
* bootstrap/bootstrap.c, postmaster/bgwriter.c, postmaster/walwriter.c,
* postmaster/autovacuum.c, postmaster/pgarch.c, postmaster/pgstat.c,
* postmaster/syslogger.c, postmaster/bgworker.c and
* postmaster/checkpointer.c.
*/
pqinitmask();
PG_SETMASK(&BlockSig);
pqsignal_no_restart(SIGHUP, SIGHUP_handler); /* reread config file and
* have children do same */
pqsignal_no_restart(SIGINT, pmdie); /* send SIGTERM and shut down */
pqsignal_no_restart(SIGQUIT, pmdie); /* send SIGQUIT and die */
pqsignal_no_restart(SIGTERM, pmdie); /* wait for children and shut down */
pqsignal(SIGALRM, SIG_IGN); /* ignored */
pqsignal(SIGPIPE, SIG_IGN); /* ignored */
pqsignal_no_restart(SIGUSR1, sigusr1_handler); /* message from child
* process */
pqsignal_no_restart(SIGUSR2, dummy_handler); /* unused, reserve for
* children */
pqsignal_no_restart(SIGCHLD, reaper); /* handle child termination */
/*
* No other place in Postgres should touch SIGTTIN/SIGTTOU handling. We
* ignore those signals in a postmaster environment, so that there is no
* risk of a child process freezing up due to writing to stderr. But for
* a standalone backend, their default handling is reasonable. Hence, all
* child processes should just allow the inherited settings to stand.
*/
#ifdef SIGTTIN
pqsignal(SIGTTIN, SIG_IGN); /* ignored */
#endif
#ifdef SIGTTOU
pqsignal(SIGTTOU, SIG_IGN); /* ignored */
#endif
/* ignore SIGXFSZ, so that ulimit violations work like disk full */
#ifdef SIGXFSZ
pqsignal(SIGXFSZ, SIG_IGN); /* ignored */
#endif
/*
* Options setup
*/
InitializeGUCOptions();
opterr = 1;
/*
* Parse command-line options. CAUTION: keep this in sync with
* tcop/postgres.c (the option sets should not conflict) and with the
* common help() function in main/main.c.
*/
while ((opt = getopt(argc, argv, "B:bc:C:D:d:EeFf:h:ijk:lMmN:nOo:Pp:r:S:sTt:W:-:")) != -1)
{
switch (opt)
{
case 'B':
SetConfigOption("shared_buffers", optarg, PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'b':
/* Undocumented flag used for binary upgrades */
IsBinaryUpgrade = true;
break;
case 'C':
output_config_variable = strdup(optarg);
break;
case 'D':
userDoption = strdup(optarg);
break;
case 'd':
set_debug_options(atoi(optarg), PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'E':
SetConfigOption("log_statement", "all", PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'e':
SetConfigOption("datestyle", "euro", PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'F':
SetConfigOption("fsync", "false", PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'f':
if (!set_plan_disabling_options(optarg, PGC_POSTMASTER, PGC_S_ARGV))
{
write_stderr("%s: invalid argument for option -f: \"%s\"\n",
progname, optarg);
ExitPostmaster(1);
}
break;
case 'h':
SetConfigOption("listen_addresses", optarg, PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'i':
SetConfigOption("listen_addresses", "*", PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'j':
/* only used by interactive backend */
break;
case 'k':
SetConfigOption("unix_socket_directories", optarg, PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'l':
SetConfigOption("ssl", "true", PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'M':
/* Undocumented flag used for mutating a directory that was a copy of a
* master data directory and needs to now be a segment directory. Only
* use on the first time the segment is started, and only use in
* utility mode, as changes will be destructive, and will assume that
* the segment has never participated in a distributed
* transaction.*/
ConvertMasterDataDirToSegment = true;
break;
case 'm':
/*
* In maintenance mode:
* 1. allow DML on catalog table
* 2. allow DML on segments
*/
SetConfigOption("maintenance_mode", "true", PGC_POSTMASTER, PGC_S_ARGV);
SetConfigOption("allow_segment_DML", "true", PGC_POSTMASTER, PGC_S_ARGV);
SetConfigOption("allow_system_table_mods", "true", PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'N':
SetConfigOption("max_connections", optarg, PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'n':
/* Don't reinit shared mem after abnormal exit */
Reinit = false;
break;
case 'O':
/* Only use in single user mode */
SetConfigOption("allow_system_table_mods", "true", PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'o':
/* Other options to pass to the backend on the command line */
snprintf(ExtraOptions + strlen(ExtraOptions),
sizeof(ExtraOptions) - strlen(ExtraOptions),
" %s", optarg);
break;
case 'P':
SetConfigOption("ignore_system_indexes", "true", PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'p':
SetConfigOption("port", optarg, PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'r':
/* only used by single-user backend */
break;
case 'S':
SetConfigOption("work_mem", optarg, PGC_POSTMASTER, PGC_S_ARGV);
break;
case 's':
SetConfigOption("log_statement_stats", "true", PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'T':
/*
* In the event that some backend dumps core, send SIGSTOP,
* rather than SIGQUIT, to all its peers. This lets the wily
* post_hacker collect core dumps from everyone.
*/
SendStop = true;
break;
case 't':
{
const char *tmp = get_stats_option_name(optarg);
if (tmp)
{
SetConfigOption(tmp, "true", PGC_POSTMASTER, PGC_S_ARGV);
}
else
{
write_stderr("%s: invalid argument for option -t: \"%s\"\n",
progname, optarg);
ExitPostmaster(1);
}
break;
}
case 'W':
SetConfigOption("post_auth_delay", optarg, PGC_POSTMASTER, PGC_S_ARGV);
break;
case 'c':
case '-':
{
char *name,
*value;
ParseLongOption(optarg, &name, &value);
if (!value)
{
if (opt == '-')
ereport(ERROR,
(errcode(ERRCODE_SYNTAX_ERROR),
errmsg("--%s requires a value",
optarg)));
else
ereport(ERROR,
(errcode(ERRCODE_SYNTAX_ERROR),
errmsg("-c %s requires a value",
optarg)));
}
SetConfigOption(name, value, PGC_POSTMASTER, PGC_S_ARGV);
free(name);
if (value)
free(value);
break;
}
default:
write_stderr("Try \"%s --help\" for more information.\n",
progname);
ExitPostmaster(1);
}
}
/*
* Postmaster accepts no non-option switch arguments.
*/
if (optind < argc)
{
write_stderr("%s: invalid argument: \"%s\"\n",
progname, argv[optind]);
write_stderr("Try \"%s --help\" for more information.\n",
progname);
ExitPostmaster(1);
}
/* If gp_role is not set, use utility role instead.*/
if (Gp_role == GP_ROLE_UNDEFINED)
SetConfigOption("gp_role", "utility", PGC_POSTMASTER, PGC_S_OVERRIDE);
/*
* Locate the proper configuration files and data directory, and read
* postgresql.conf for the first time.
*/
if (!SelectConfigFiles(userDoption, progname))
ExitPostmaster(2);
/*
* CDB/MPP/GPDB: Set the processor affinity (may be a no-op on
* some platforms). The port number is nice to use because we know
* that different segments on a single host will not have the same
* port numbers.
*
* We want to do this as early as we can -- so that the OS knows
* about our binding, and all of our child processes will inherit
* the same binding.
*/
if (gp_set_proc_affinity)
setProcAffinity(PostPortNumber);
if (output_config_variable != NULL)
{
/*
* "-C guc" was specified, so print GUC's value and exit. No extra
* permission check is needed because the user is reading inside the
* data dir.
*/
const char *config_val = GetConfigOption(output_config_variable,
false, false);
puts(config_val ? config_val : "");
ExitPostmaster(0);
}
/* Verify that DataDir looks reasonable */
checkDataDir();
/* Check that pg_control exists */
checkControlFile();
/* And switch working directory into it */
ChangeToDataDir();
/*
* CDB: Decouple NBuffers from MaxBackends. The entry db doesn't benefit
* from buffers in excess of the global catalog size; this is typically
* small and unrelated to the number of clients. Segment dbs need enough
* buffers to accommodate the QEs concurrently accessing the database; but
* non-leaf QEs don't necessarily access the database (some are used only
* for sorting, hashing, etc); so again the number of buffers need not be
* in proportion to the number of connections.
*/
if (NBuffers < 16)
{
/*
* Do not accept -B so small that backends are likely to starve for
* lack of buffers. The specific choices here are somewhat arbitrary.
*/
write_stderr("%s: the number of buffers (-B) must be at least 16\n", progname);
ExitPostmaster(1);
}
/*
* Check for invalid combinations of GUC settings.
*
* In GPDB, restricted mode gpstart uses superuser_reserved_connections ==
* max_connections. Hence, in gpdb below check is modified from upstream to
* allow equal setting.
*/
if (ReservedBackends > MaxConnections)
{
write_stderr("%s: superuser_reserved_connections (%d) must be less than max_connections (%d)\n",
progname,
ReservedBackends, MaxConnections);
ExitPostmaster(1);
}
if (XLogArchiveMode > ARCHIVE_MODE_OFF && wal_level == WAL_LEVEL_MINIMAL)
ereport(ERROR,
(errmsg("WAL archival cannot be enabled when wal_level is \"minimal\"")));
if (max_wal_senders > 0 && wal_level == WAL_LEVEL_MINIMAL)
ereport(ERROR,
(errmsg("WAL streaming (max_wal_senders > 0) requires wal_level \"replica\" or \"logical\"")));
if ( GpIdentity.dbid == -1 && Gp_role == GP_ROLE_UTILITY)
{
/**
* okay in utility mode! -- when starting the master in utility mode to fetch the configuration contents,
* we don't actually know the dbid.
*/
}
else if ( GpIdentity.dbid < 0 )
{
ereport(FATAL,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("dbid (from -b option) is not specified or is invalid. This value must be >= 0, or >= -1 in utility mode. "
"The dbid value to pass can be determined from this server's entry in the segment configuration; it may be -1 if running in utility mode.")));
}
if ( GpIdentity.segindex < -1 ) /* -1 is okay -- that means the master */
{
ereport(FATAL,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("contentid (from -C option) is not specified or is invalid. This value must be >= -1. "
"The contentid value to pass can be determined this server's entry in the segment configuration; it may be -1 for a master, or in utility mode."
)));
}
/*
* Other one-time internal sanity checks can go here, if they are fast.
* (Put any slow processing further down, after postmaster.pid creation.)
*/
if (!CheckDateTokenTables())
{
write_stderr("%s: invalid datetoken tables, please fix\n", progname);
ExitPostmaster(1);
}
/*
* Now that we are done processing the postmaster arguments, reset
* getopt(3) library so that it will work correctly in subprocesses.
*/
optind = 1;
#if defined(HAVE_INT_OPTRESET) || !defined(HAVE_GETOPT)
optreset = 1; /* some systems need this too */
#endif
/* For debugging: display postmaster environment */
{
extern char **environ;
char **p;
ereport(DEBUG3,
(errmsg_internal("%s: PostmasterMain: initial environment dump:",
progname)));
ereport(DEBUG3,
(errmsg_internal("-----------------------------------------")));
for (p = environ; *p; ++p)
ereport(DEBUG3,
(errmsg_internal("\t%s", *p)));
ereport(DEBUG3,
(errmsg_internal("-----------------------------------------")));
}
/*
* Create lockfile for data directory.
*
* We want to do this before we try to grab the input sockets, because the
* data directory interlock is more reliable than the socket-file
* interlock (thanks to whoever decided to put socket files in /tmp :-().
* For the same reason, it's best to grab the TCP socket(s) before the
* Unix socket(s).
*
* Also note that this internally sets up the on_proc_exit function that
* is responsible for removing both data directory and socket lockfiles;
* so it must happen before opening sockets so that at exit, the socket
* lockfiles go away after CloseServerPorts runs.
*/
CreateDataDirLockFile(true);
/*
* Remember postmaster startup time
* CDB: Moved this code up from below for use in error message headers.
*/
PgStartTime = GetCurrentTimestamp();
/*
* Read the control file (for error checking and config info).
*
* Since we verify the control file's CRC, this has a useful side effect
* on machines where we need a run-time test for CRC support instructions.
* The postmaster will do the test once at startup, and then its child
* processes will inherit the correct function pointer and not need to
* repeat the test.
*/
LocalProcessControlFile(false);
/*
* Initialize SSL library, if specified.
*/
#ifdef USE_SSL
if (EnableSSL)
{
(void) secure_initialize(true);
LoadedSSL = true;
}
#endif
/*
* CDB: gpdb auxilary process like fts probe, dtx recovery process is
* essential, we need to load them ahead of custom shared preload libraries
* to avoid exceeding max_worker_processes.
*/
load_auxiliary_libraries();
/*
* Register the apply launcher. Since it registers a background worker,
* it needs to be called before InitializeMaxBackends(), and it's probably
* a good idea to call it before any modules had chance to take the
* background worker slots.
*/
ApplyLauncherRegister();
/*
* process any libraries that should be preloaded at postmaster start
*/
process_shared_preload_libraries();
/*
* Now that loadable modules have had their chance to register background
* workers, calculate MaxBackends.
*/
InitializeMaxBackends();
/* Report server startup in log */
ereport(LOG,
(errmsg("starting %s", PG_VERSION_STR)));
/*
* Establish input sockets.
*
* First, mark them all closed, and set up an on_proc_exit function that's
* charged with closing the sockets again at postmaster shutdown.
*/
for (i = 0; i < MAXLISTEN; i++)
ListenSocket[i] = PGINVALID_SOCKET;
on_proc_exit(CloseServerPorts, 0);
if (ListenAddresses)
{
char *rawstring;
List *elemlist;
ListCell *l;
int success = 0;
/* Need a modifiable copy of ListenAddresses */
rawstring = pstrdup(ListenAddresses);
/* Parse string into list of hostnames */
if (!SplitIdentifierString(rawstring, ',', &elemlist))
{
/* syntax error in list */
ereport(FATAL,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("invalid list syntax in parameter \"%s\"",
"listen_addresses")));
}
foreach(l, elemlist)
{
char *curhost = (char *) lfirst(l);
if (strcmp(curhost, "*") == 0)
status = StreamServerPort(AF_UNSPEC, NULL,
(unsigned short) PostPortNumber,
NULL,
ListenSocket, MAXLISTEN);
else
status = StreamServerPort(AF_UNSPEC, curhost,
(unsigned short) PostPortNumber,
NULL,
ListenSocket, MAXLISTEN);
if (status == STATUS_OK)
{
success++;
/* record the first successful host addr in lockfile */
if (!listen_addr_saved)
{
AddToDataDirLockFile(LOCK_FILE_LINE_LISTEN_ADDR, curhost);
listen_addr_saved = true;
}
}
else
ereport(WARNING,
(errmsg("could not create listen socket for \"%s\"",
curhost)));
}
if (!success && elemlist != NIL)
ereport(FATAL,
(errmsg("could not create any TCP/IP sockets")));
list_free(elemlist);
pfree(rawstring);
}
#ifdef USE_BONJOUR
/* Register for Bonjour only if we opened TCP socket(s) */
if (enable_bonjour && ListenSocket[0] != PGINVALID_SOCKET)
{
DNSServiceErrorType err;
/*
* We pass 0 for interface_index, which will result in registering on
* all "applicable" interfaces. It's not entirely clear from the
* DNS-SD docs whether this would be appropriate if we have bound to
* just a subset of the available network interfaces.
*/
err = DNSServiceRegister(&bonjour_sdref,
0,
0,
bonjour_name,
"_postgresql._tcp.",
NULL,
NULL,
pg_hton16(PostPortNumber),
0,
NULL,
NULL,
NULL);
if (err != kDNSServiceErr_NoError)
elog(LOG, "DNSServiceRegister() failed: error code %ld",
(long) err);
/*
* We don't bother to read the mDNS daemon's reply, and we expect that
* it will automatically terminate our registration when the socket is
* closed at postmaster termination. So there's nothing more to be
* done here. However, the bonjour_sdref is kept around so that
* forked children can close their copies of the socket.
*/
}
#endif
#ifdef HAVE_UNIX_SOCKETS
if (Unix_socket_directories)
{
char *rawstring;
List *elemlist;
ListCell *l;
int success = 0;
/* Need a modifiable copy of Unix_socket_directories */
rawstring = pstrdup(Unix_socket_directories);
/* Parse string into list of directories */
if (!SplitDirectoriesString(rawstring, ',', &elemlist))
{
/* syntax error in list */
ereport(FATAL,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("invalid list syntax in parameter \"%s\"",
"unix_socket_directories")));
}
foreach(l, elemlist)
{
char *socketdir = (char *) lfirst(l);
status = StreamServerPort(AF_UNIX, NULL,
(unsigned short) PostPortNumber,
socketdir,
ListenSocket, MAXLISTEN);
if (status == STATUS_OK)
{
success++;
/* record the first successful Unix socket in lockfile */
if (success == 1)
AddToDataDirLockFile(LOCK_FILE_LINE_SOCKET_DIR, socketdir);
}
else
ereport(WARNING,
(errmsg("could not create Unix-domain socket in directory \"%s\"",
socketdir)));
}
if (!success && elemlist != NIL)
ereport(FATAL,
(errmsg("could not create any Unix-domain sockets")));
list_free_deep(elemlist);
pfree(rawstring);
}
#endif
/*
* check that we have some socket to listen on
*/
if (ListenSocket[0] == PGINVALID_SOCKET)
ereport(FATAL,
(errmsg("no socket created for listening")));
/*
* If no valid TCP ports, write an empty line for listen address,
* indicating the Unix socket must be used. Note that this line is not
* added to the lock file until there is a socket backing it.
*/
if (!listen_addr_saved)
AddToDataDirLockFile(LOCK_FILE_LINE_LISTEN_ADDR, "");
/*
* Set up shared memory and semaphores.
*/
reset_shared(PostPortNumber);
/*
* Estimate number of openable files. This must happen after setting up
* semaphores, because on some platforms semaphores count as open files.
*/
set_max_safe_fds();
/*
* Set reference point for stack-depth checking.
*/
set_stack_base();
/*
* Initialize pipe (or process handle on Windows) that allows children to
* wake up from sleep on postmaster death.
*/
InitPostmasterDeathWatchHandle();
#ifdef WIN32
/*
* Initialize I/O completion port used to deliver list of dead children.
*/
win32ChildQueue = CreateIoCompletionPort(INVALID_HANDLE_VALUE, NULL, 0, 1);
if (win32ChildQueue == NULL)
ereport(FATAL,
(errmsg("could not create I/O completion port for child queue")));
#endif
/*
* Record postmaster options. We delay this till now to avoid recording
* bogus options (eg, NBuffers too high for available memory).
*/
if (!CreateOptsFile(argc, argv, my_exec_path))
ExitPostmaster(1);
#ifdef EXEC_BACKEND
/* Write out nondefault GUC settings for child processes to use */
write_nondefault_variables(PGC_POSTMASTER);
#endif
/*
* Write the external PID file if requested
*/
if (external_pid_file)
{
FILE *fpidfile = fopen(external_pid_file, "w");
if (fpidfile)
{
fprintf(fpidfile, "%d\n", MyProcPid);
fclose(fpidfile);
/* Make PID file world readable */
if (chmod(external_pid_file, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH) != 0)
write_stderr("%s: could not change permissions of external PID file \"%s\": %s\n",
progname, external_pid_file, strerror(errno));
}
else
write_stderr("%s: could not write external PID file \"%s\": %s\n",
progname, external_pid_file, strerror(errno));
on_proc_exit(unlink_external_pid_file, 0);
}
/*
* Remove old temporary files. At this point there can be no other
* Postgres processes running in this directory, so this should be safe.
*/
RemovePgTempFiles();
/*
* Forcibly remove the files signaling a standby promotion request.
* Otherwise, the existence of those files triggers a promotion too early,
* whether a user wants that or not.
*
* This removal of files is usually unnecessary because they can exist
* only during a few moments during a standby promotion. However there is
* a race condition: if pg_ctl promote is executed and creates the files
* during a promotion, the files can stay around even after the server is
* brought up to new master. Then, if new standby starts by using the
* backup taken from that master, the files can exist at the server
* startup and should be removed in order to avoid an unexpected
* promotion.
*
* Note that promotion signal files need to be removed before the startup
* process is invoked. Because, after that, they can be used by
* postmaster's SIGUSR1 signal handler.
*/
RemovePromoteSignalFiles();
/* Do the same for logrotate signal file */
RemoveLogrotateSignalFiles();
/* Remove any outdated file holding the current log filenames. */
if (unlink(LOG_METAINFO_DATAFILE) < 0 && errno != ENOENT)
ereport(LOG,
(errcode_for_file_access(),
errmsg("could not remove file \"%s\": %m",
LOG_METAINFO_DATAFILE)));
/*
* If enabled, start up syslogger collection subprocess
*/
SysLoggerPID = SysLogger_Start();
/*
* Reset whereToSendOutput from DestDebug (its starting state) to
* DestNone. This stops ereport from sending log messages to stderr unless
* Log_destination permits. We don't do this until the postmaster is
* fully launched, since startup failures may as well be reported to
* stderr.
*
* If we are in fact disabling logging to stderr, first emit a log message
* saying so, to provide a breadcrumb trail for users who may not remember
* that their logging is configured to go somewhere else.
*/
if (!(Log_destination & LOG_DESTINATION_STDERR))
ereport(LOG,
(errmsg("ending log output to stderr"),
errhint("Future log output will go to log destination \"%s\".",
Log_destination_string)));
whereToSendOutput = DestNone;
/*
* Initialize stats collection subsystem (this does NOT start the
* collector process!)
*/
pgstat_init();
/*
* Initialize the autovacuum subsystem (again, no process start yet)
*/
autovac_init();
/*
* Load configuration files for client authentication.
*/
if (!load_hba())
{
/*
* It makes no sense to continue if we fail to load the HBA file,
* since there is no way to connect to the database in this case.
*/
ereport(FATAL,
(errcode(ERRCODE_CONFIG_FILE_ERROR),
(errmsg("could not load pg_hba.conf"))));
}
if (!load_ident())
{
/*
* We can start up without the IDENT file, although it means that you
* cannot log in using any of the authentication methods that need a
* user name mapping. load_ident() already logged the details of error
* to the log.
*/
}
#ifdef HAVE_PTHREAD_IS_THREADED_NP
/*
* On macOS, libintl replaces setlocale() with a version that calls
* CFLocaleCopyCurrent() when its second argument is "" and every relevant
* environment variable is unset or empty. CFLocaleCopyCurrent() makes
* the process multithreaded. The postmaster calls sigprocmask() and
* calls fork() without an immediate exec(), both of which have undefined
* behavior in a multithreaded program. A multithreaded postmaster is the
* normal case on Windows, which offers neither fork() nor sigprocmask().
*/
if (pthread_is_threaded_np() != 0)
ereport(FATAL,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("postmaster became multithreaded during startup"),
errhint("Set the LC_ALL environment variable to a valid locale.")));
#endif
/*
* Remember postmaster startup time
*/
PgStartTime = GetCurrentTimestamp();
/*
* Report postmaster status in the postmaster.pid file, to allow pg_ctl to
* see what's happening.
*/
AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_STARTING);
/*
* We're ready to rock and roll...
*/
StartupPID = StartupDataBase();
Assert(StartupPID != 0);
StartupStatus = STARTUP_RUNNING;
pmState = PM_STARTUP;
/* Some workers may be scheduled to start now */
maybe_start_bgworkers();
status = ServerLoop();
/*
* ServerLoop probably shouldn't ever return, but if it does, close down.
*/
ExitPostmaster(status != STATUS_OK);
abort(); /* not reached */
}
/*
* on_proc_exit callback to close server's listen sockets
*/
static void
CloseServerPorts(int status, Datum arg)
{
int i;
/*
* First, explicitly close all the socket FDs. We used to just let this
* happen implicitly at postmaster exit, but it's better to close them
* before we remove the postmaster.pid lockfile; otherwise there's a race
* condition if a new postmaster wants to re-use the TCP port number.
*/
for (i = 0; i < MAXLISTEN; i++)
{
if (ListenSocket[i] != PGINVALID_SOCKET)
{
StreamClose(ListenSocket[i]);
ListenSocket[i] = PGINVALID_SOCKET;
}
}
/*
* Next, remove any filesystem entries for Unix sockets. To avoid race
* conditions against incoming postmasters, this must happen after closing
* the sockets and before removing lock files.
*/
RemoveSocketFiles();
/*
* We don't do anything about socket lock files here; those will be
* removed in a later on_proc_exit callback.
*/
}
/*
* on_proc_exit callback to delete external_pid_file
*/
static void
unlink_external_pid_file(int status, Datum arg)
{
if (external_pid_file)
unlink(external_pid_file);
}
/*
* Compute and check the directory paths to files that are part of the
* installation (as deduced from the postgres executable's own location)
*/
static void
getInstallationPaths(const char *argv0)
{
DIR *pdir;
/* Locate the postgres executable itself */
if (find_my_exec(argv0, my_exec_path) < 0)
elog(FATAL, "%s: could not locate my own executable path", argv0);
#ifdef EXEC_BACKEND
/* Locate executable backend before we change working directory */
if (find_other_exec(argv0, "postgres", PG_BACKEND_VERSIONSTR,
postgres_exec_path) < 0)
ereport(FATAL,
(errmsg("%s: could not locate matching postgres executable",
argv0)));
#endif
/*
* Locate the pkglib directory --- this has to be set early in case we try
* to load any modules from it in response to postgresql.conf entries.
*/
get_pkglib_path(my_exec_path, pkglib_path);
/*
* Verify that there's a readable directory there; otherwise the Postgres
* installation is incomplete or corrupt. (A typical cause of this
* failure is that the postgres executable has been moved or hardlinked to
* some directory that's not a sibling of the installation lib/
* directory.)
*/
pdir = AllocateDir(pkglib_path);
if (pdir == NULL)
ereport(ERROR,
(errcode_for_file_access(),
errmsg("could not open directory \"%s\": %m",
pkglib_path),
errhint("This may indicate an incomplete PostgreSQL installation, or that the file \"%s\" has been moved away from its proper location.",
my_exec_path)));
FreeDir(pdir);
/*
* XXX is it worth similarly checking the share/ directory? If the lib/
* directory is there, then share/ probably is too.
*/
}
/*
* Check that pg_control exists in the correct location in the data directory.
*
* No attempt is made to validate the contents of pg_control here. This is
* just a sanity check to see if we are looking at a real data directory.
*/
static void
checkControlFile(void)
{
char path[MAXPGPATH];
FILE *fp;
snprintf(path, sizeof(path), "%s/global/pg_control", DataDir);
fp = AllocateFile(path, PG_BINARY_R);
if (fp == NULL)
{
write_stderr("%s: could not find the database system\n"
"Expected to find it in the directory \"%s\",\n"
"but could not open file \"%s\": %s\n",
progname, DataDir, path, strerror(errno));
ExitPostmaster(2);
}
FreeFile(fp);
}
/*
* check if file or directory under "DataDir" exists and is accessible
*/
static void
checkPgDir(const char *dir)
{
struct stat st;
/*
* DataDir is known to be smaller than MAXPGPATH, and 'dir' argument is always
* a short constant.
*/
char buf[MAXPGPATH + MAXPGPATH];
snprintf(buf, sizeof(buf), "%s%s", DataDir, dir);
if (stat(buf, &st) != 0)
{
/* check if log is there */
snprintf(buf, sizeof(buf), "%s%s", DataDir, "/log");
if (stat(buf, &st) == 0)
elog(LOG, "System file or directory missing (%s), shutting down segment", dir);
/* quit all processes and exit */
pmdie(SIGQUIT);
}
}
/*
* Determine how long should we let ServerLoop sleep.
*
* In normal conditions we wait at most one minute, to ensure that the other
* background tasks handled by ServerLoop get done even when no requests are
* arriving. However, if there are background workers waiting to be started,
* we don't actually sleep so that they are quickly serviced. Other exception
* cases are as shown in the code.
*/
static void
DetermineSleepTime(struct timeval *timeout)
{
TimestampTz next_wakeup = 0;
/*
* Normal case: either there are no background workers at all, or we're in
* a shutdown sequence (during which we ignore bgworkers altogether).
*/
if (Shutdown > NoShutdown ||
(!StartWorkerNeeded && !HaveCrashedWorker))
{
if (AbortStartTime != 0)
{
/* time left to abort; clamp to 0 in case it already expired */
timeout->tv_sec = SIGKILL_CHILDREN_AFTER_SECS -
(time(NULL) - AbortStartTime);
timeout->tv_sec = Max(timeout->tv_sec, 0);
timeout->tv_usec = 0;
}
else
{
timeout->tv_sec = 60;
timeout->tv_usec = 0;
}
return;
}
if (StartWorkerNeeded)
{
timeout->tv_sec = 0;
timeout->tv_usec = 0;
return;
}
if (HaveCrashedWorker)
{
slist_mutable_iter siter;
/*
* When there are crashed bgworkers, we sleep just long enough that
* they are restarted when they request to be. Scan the list to
* determine the minimum of all wakeup times according to most recent
* crash time and requested restart interval.
*/
slist_foreach_modify(siter, &BackgroundWorkerList)
{
RegisteredBgWorker *rw;
TimestampTz this_wakeup;
rw = slist_container(RegisteredBgWorker, rw_lnode, siter.cur);
if (rw->rw_crashed_at == 0)
continue;
if (rw->rw_worker.bgw_restart_time == BGW_NEVER_RESTART
|| rw->rw_terminate)
{
ForgetBackgroundWorker(&siter);
continue;
}
this_wakeup = TimestampTzPlusMilliseconds(rw->rw_crashed_at,
1000L * rw->rw_worker.bgw_restart_time);
if (next_wakeup == 0 || this_wakeup < next_wakeup)
next_wakeup = this_wakeup;
}
}
if (next_wakeup != 0)
{
long secs;
int microsecs;
TimestampDifference(GetCurrentTimestamp(), next_wakeup,
&secs, µsecs);
timeout->tv_sec = secs;
timeout->tv_usec = microsecs;
/* Ensure we don't exceed one minute */
if (timeout->tv_sec > 60)
{
timeout->tv_sec = 60;
timeout->tv_usec = 0;
}
}
else
{
timeout->tv_sec = 60;
timeout->tv_usec = 0;
}
}
/*
* Main idle loop of postmaster
*
* NB: Needs to be called with signals blocked
*/
static int
ServerLoop(void)
{
fd_set readmask;
int nSockets;
time_t last_lockfile_recheck_time,
last_touch_time;
last_lockfile_recheck_time = last_touch_time = time(NULL);
nSockets = initMasks(&readmask);
for (;;)
{
fd_set rmask;
int selres;
time_t now;
/*
* Wait for a connection request to arrive.
*
* We block all signals except while sleeping. That makes it safe for
* signal handlers, which again block all signals while executing, to
* do nontrivial work.
*
* If we are in PM_WAIT_DEAD_END state, then we don't want to accept
* any new connections, so we don't call select(), and just sleep.
*/
memcpy((char *) &rmask, (char *) &readmask, sizeof(fd_set));
if (pmState == PM_WAIT_DEAD_END)
{
PG_SETMASK(&UnBlockSig);
pg_usleep(100000L); /* 100 msec seems reasonable */
selres = 0;
PG_SETMASK(&BlockSig);
}
else
{
/* must set timeout each time; some OSes change it! */
struct timeval timeout;
/* Needs to run with blocked signals! */
DetermineSleepTime(&timeout);
PG_SETMASK(&UnBlockSig);
selres = select(nSockets, &rmask, NULL, NULL, &timeout);
PG_SETMASK(&BlockSig);
}
/* Now check the select() result */
if (selres < 0)
{
if (errno != EINTR && errno != EWOULDBLOCK)
{
ereport(LOG,
(errcode_for_socket_access(),
errmsg("select() failed in postmaster: %m")));
return STATUS_ERROR;
}
}
/* Sanity check for system directories on all segments */
checkPgDir("");
checkPgDir("/base");
checkPgDir("/global");
checkPgDir("/pg_twophase");
checkPgDir("/pg_distributedlog");
checkPgDir("/pg_multixact");
checkPgDir("/pg_subtrans");
checkPgDir("/pg_wal");
checkPgDir("/pg_xact");
checkPgDir("/pg_multixact/members");
checkPgDir("/pg_multixact/offsets");
/*
* Block all signals until we wait again. (This makes it safe for our
* signal handlers to do nontrivial work.)
*/
PG_SETMASK(&BlockSig);
/*
* New connection pending on any of our sockets? If so, fork a child
* process to deal with it.
*/
if (selres > 0)
{
int i;
for (i = 0; i < MAXLISTEN; i++)
{
if (ListenSocket[i] == PGINVALID_SOCKET)
break;
if (FD_ISSET(ListenSocket[i], &rmask))
{
Port *port;
port = ConnCreate(ListenSocket[i]);
if (port)
{
BackendStartup(port);
/*
* We no longer need the open socket or port structure
* in this process
*/
StreamClose(port->sock);
ConnFree(port);
}
}
}
}
/* If we have lost the log collector, try to start a new one */
if (SysLoggerPID == 0 && Logging_collector)
SysLoggerPID = SysLogger_Start();
/*
* If no background writer process is running, and we are not in a
* state that prevents it, start one. It doesn't matter if this
* fails, we'll just try again later. Likewise for the checkpointer.
*/
if (pmState == PM_RUN || pmState == PM_RECOVERY ||
pmState == PM_HOT_STANDBY)
{
if (CheckpointerPID == 0)
CheckpointerPID = StartCheckpointer();
if (BgWriterPID == 0)
BgWriterPID = StartBackgroundWriter();
}
/*
* Likewise, if we have lost the walwriter process, try to start a new
* one. But this is needed only in normal operation (else we cannot
* be writing any new WAL).
*/
if (WalWriterPID == 0 && pmState == PM_RUN)
WalWriterPID = StartWalWriter();
/*
* If we have lost the autovacuum launcher, try to start a new one. We
* don't want autovacuum to run in binary upgrade mode because
* autovacuum might update relfrozenxid for empty tables before the
* physical files are put in place.
*/
if (!IsBinaryUpgrade && AutoVacPID == 0 &&
(AutoVacuumingActive() || start_autovac_launcher) &&
pmState == PM_RUN)
{
AutoVacPID = StartAutoVacLauncher();
if (AutoVacPID != 0)
start_autovac_launcher = false; /* signal processed */
}
/* If we have lost the stats collector, try to start a new one */
if (PgStatPID == 0 &&
(pmState == PM_RUN || pmState == PM_HOT_STANDBY))
PgStatPID = pgstat_start();
/* If we have lost the archiver, try to start a new one. */
if (PgArchPID == 0 && PgArchStartupAllowed())
PgArchPID = pgarch_start();
/* If we need to signal the autovacuum launcher, do so now */
if (avlauncher_needs_signal)
{
avlauncher_needs_signal = false;
if (AutoVacPID != 0)
kill(AutoVacPID, SIGUSR2);
}
/* If we need to start a WAL receiver, try to do that now */
if (WalReceiverRequested)
MaybeStartWalReceiver();
/* Get other worker processes running, if needed */
if (StartWorkerNeeded || HaveCrashedWorker)
maybe_start_bgworkers();
#ifdef HAVE_PTHREAD_IS_THREADED_NP
/*
* With assertions enabled, check regularly for appearance of
* additional threads. All builds check at start and exit.
*/
Assert(pthread_is_threaded_np() == 0);
#endif
/*
* Lastly, check to see if it's time to do some things that we don't
* want to do every single time through the loop, because they're a
* bit expensive. Note that there's up to a minute of slop in when
* these tasks will be performed, since DetermineSleepTime() will let
* us sleep at most that long; except for SIGKILL timeout which has
* special-case logic there.
*/
now = time(NULL);
/*
* If we already sent SIGQUIT to children and they are slow to shut
* down, it's time to send them SIGKILL. This doesn't happen
* normally, but under certain conditions backends can get stuck while
* shutting down. This is a last measure to get them unwedged.
*
* Note we also do this during recovery from a process crash.
*/
if ((Shutdown >= ImmediateShutdown || (FatalError && !SendStop)) &&
AbortStartTime != 0 &&
(now - AbortStartTime) >= SIGKILL_CHILDREN_AFTER_SECS)
{
#ifdef FAULT_INJECTOR
if (SIMPLE_FAULT_INJECTOR("postmaster_server_loop_no_sigkill") == FaultInjectorTypeSkip)
{
/*
* This prevents sending SIGKILL to child processes for testing purpose.
* Since each time hitting this fault will print a log, let's wait 0.1s just
* not to overwhelm the logs. Reaching here means we are shutting down so
* making postmaster slower should be OK (only for testing anyway).
*/
pg_usleep(100000L);
continue;
}
#endif
/* We were gentle with them before. Not anymore */
TerminateChildren(SIGKILL);
/* reset flag so we don't SIGKILL again */
AbortStartTime = 0;
}
/*
* Once a minute, verify that postmaster.pid hasn't been removed or
* overwritten. If it has, we force a shutdown. This avoids having
* postmasters and child processes hanging around after their database
* is gone, and maybe causing problems if a new database cluster is
* created in the same place. It also provides some protection
* against a DBA foolishly removing postmaster.pid and manually
* starting a new postmaster. Data corruption is likely to ensue from
* that anyway, but we can minimize the damage by aborting ASAP.
*/
if (now - last_lockfile_recheck_time >= 1 * SECS_PER_MINUTE)
{
if (!RecheckDataDirLockFile())
{
ereport(LOG,
(errmsg("performing immediate shutdown because data directory lock file is invalid")));
kill(MyProcPid, SIGQUIT);
}
last_lockfile_recheck_time = now;
}
/*
* Touch Unix socket and lock files every 58 minutes, to ensure that
* they are not removed by overzealous /tmp-cleaning tasks. We assume
* no one runs cleaners with cutoff times of less than an hour ...
*/
if (now - last_touch_time >= 58 * SECS_PER_MINUTE)
{
TouchSocketFiles();
TouchSocketLockFiles();
last_touch_time = now;
}
}
}
/*
* Initialise the masks for select() for the ports we are listening on.
* Return the number of sockets to listen on.
*/
static int
initMasks(fd_set *rmask)
{
int maxsock = -1;
int i;
FD_ZERO(rmask);
for (i = 0; i < MAXLISTEN; i++)
{
int fd = ListenSocket[i];
if (fd == PGINVALID_SOCKET)
break;
FD_SET(fd, rmask);
if (fd > maxsock)
maxsock = fd;
}
return maxsock + 1;
}
/*
* Once the flag is reset, libpq connections (e.g. FTS probe requests) should
* not get CAC_MIRROR_READY response. This flag is needed during GPDB startup
* to enable "pg_ctl -w". It need not interfere during or after promotion.
* This function is called right after removing RECOVERY_COMMAND_FILE upon
* receiving a promotion request.
*/
void inline
ResetMirrorReadyFlag(void)
{
*pm_launch_walreceiver = false;
}
static inline void
SetMirrorReadyFlag(void)
{
*pm_launch_walreceiver = true;
}
static inline bool
GetMirrorReadyFlag(void)
{
return *pm_launch_walreceiver;
}
/*
* Read a client's startup packet and do something according to it.
*
* Returns STATUS_OK or STATUS_ERROR, or might call ereport(FATAL) and
* not return at all.
*
* (Note that ereport(FATAL) stuff is sent to the client, so only use it
* if that's what you want. Return STATUS_ERROR if you don't want to
* send anything to the client, which would typically be appropriate
* if we detect a communications failure.)
*
* Set secure_done when negotiation of an encrypted layer (currently, TLS or
* GSSAPI) is already completed.
*/
static int
ProcessStartupPacket(Port *port, bool secure_done)
{
int32 len;
void *buf;
ProtocolVersion proto;
MemoryContext oldcontext;
char *gpqeid = NULL;
XLogRecPtr recptr;
pq_startmsgread();
/*
* Grab the first byte of the length word separately, so that we can tell
* whether we have no data at all or an incomplete packet. (This might
* sound inefficient, but it's not really, because of buffering in
* pqcomm.c.)
*/
if (pq_getbytes((char *) &len, 1) == EOF)
{
/*
* If we get no data at all, don't clutter the log with a complaint;
* such cases often occur for legitimate reasons. An example is that
* we might be here after responding to NEGOTIATE_SSL_CODE, and if the
* client didn't like our response, it'll probably just drop the
* connection. Service-monitoring software also often just opens and
* closes a connection without sending anything. (So do port
* scanners, which may be less benign, but it's not really our job to
* notice those.)
*/
return STATUS_ERROR;
}
if (pq_getbytes(((char *) &len) + 1, 3) == EOF)
{
/* Got a partial length word, so bleat about that */
if (!secure_done)
ereport(COMMERROR,
(errcode(ERRCODE_PROTOCOL_VIOLATION),
errmsg("incomplete startup packet")));
return STATUS_ERROR;
}
len = pg_ntoh32(len);
len -= 4;
if (len < (int32) sizeof(ProtocolVersion) ||
len > MAX_STARTUP_PACKET_LENGTH)
{
ereport(COMMERROR,
(errcode(ERRCODE_PROTOCOL_VIOLATION),
errmsg("invalid length of startup packet %ld",(long)len)));
return STATUS_ERROR;
}
/*
* Allocate at least the size of an old-style startup packet, plus one
* extra byte, and make sure all are zeroes. This ensures we will have
* null termination of all strings, in both fixed- and variable-length
* packet layouts.
*/
if (len <= (int32) sizeof(StartupPacket))
buf = palloc0(sizeof(StartupPacket) + 1);
else
buf = palloc0(len + 1);
if (pq_getbytes(buf, len) == EOF)
{
ereport(COMMERROR,
(errcode(ERRCODE_PROTOCOL_VIOLATION),
errmsg("incomplete startup packet")));
return STATUS_ERROR;
}
pq_endmsgread();
/*
* The first field is either a protocol version number or a special
* request code.
*/
port->proto = proto = pg_ntoh32(*((ProtocolVersion *) buf));
if (proto == CANCEL_REQUEST_CODE || proto == FINISH_REQUEST_CODE)
{
processCancelRequest(port, buf, proto);
/* Not really an error, but we don't want to proceed further */
return STATUS_ERROR;
}
if (proto == NEGOTIATE_SSL_CODE && !secure_done)
{
char SSLok;
#ifdef USE_SSL
/* No SSL when disabled or on Unix sockets */
if (!LoadedSSL || IS_AF_UNIX(port->laddr.addr.ss_family))
SSLok = 'N';
else
SSLok = 'S'; /* Support for SSL */
#else
SSLok = 'N'; /* No support for SSL */
#endif
retry1:
if (send(port->sock, &SSLok, 1, 0) != 1)
{
if (errno == EINTR)
goto retry1; /* if interrupted, just retry */
ereport(COMMERROR,
(errcode_for_socket_access(),
errmsg("failed to send SSL negotiation response: %m")));
return STATUS_ERROR; /* close the connection */
}
#ifdef USE_SSL
if (SSLok == 'S' && secure_open_server(port) == -1)
return STATUS_ERROR;
#endif
/* regular startup packet, cancel, etc packet should follow... */
/* but not another SSL negotiation request */
return ProcessStartupPacket(port, true);
}
else if (proto == NEGOTIATE_GSS_CODE && !secure_done)
{
char GSSok = 'N';
#ifdef ENABLE_GSS
/* No GSSAPI encryption when on Unix socket */
if (!IS_AF_UNIX(port->laddr.addr.ss_family))
GSSok = 'G';
#endif
while (send(port->sock, &GSSok, 1, 0) != 1)
{
if (errno == EINTR)
continue;
ereport(COMMERROR,
(errcode_for_socket_access(),
errmsg("failed to send GSSAPI negotiation response: %m")));
return STATUS_ERROR; /* close the connection */
}
#ifdef ENABLE_GSS
if (GSSok == 'G' && secure_open_gssapi(port) == -1)
return STATUS_ERROR;
#endif
/* Won't ever see more than one negotiation request */
return ProcessStartupPacket(port, true);
}
/* Could add additional special packet types here */
/*
* Set FrontendProtocol now so that ereport() knows what format to send if
* we fail during startup.
*/
FrontendProtocol = proto;
/* Check that the major protocol version is in range. */
if (PG_PROTOCOL_MAJOR(proto) < PG_PROTOCOL_MAJOR(PG_PROTOCOL_EARLIEST) ||
PG_PROTOCOL_MAJOR(proto) > PG_PROTOCOL_MAJOR(PG_PROTOCOL_LATEST))
ereport(FATAL,
(errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
errmsg("unsupported frontend protocol %u.%u: server supports %u.0 to %u.%u",
PG_PROTOCOL_MAJOR(proto), PG_PROTOCOL_MINOR(proto),
PG_PROTOCOL_MAJOR(PG_PROTOCOL_EARLIEST),
PG_PROTOCOL_MAJOR(PG_PROTOCOL_LATEST),
PG_PROTOCOL_MINOR(PG_PROTOCOL_LATEST))));
/*
* Now fetch parameters out of startup packet and save them into the Port
* structure. All data structures attached to the Port struct must be
* allocated in TopMemoryContext so that they will remain available in a
* running backend (even after PostmasterContext is destroyed). We need
* not worry about leaking this storage on failure, since we aren't in the
* postmaster process anymore.
*/
oldcontext = MemoryContextSwitchTo(TopMemoryContext);
if (PG_PROTOCOL_MAJOR(proto) >= 3)
{
int32 offset = sizeof(ProtocolVersion);
List *unrecognized_protocol_options = NIL;
/*
* Scan packet body for name/option pairs. We can assume any string
* beginning within the packet body is null-terminated, thanks to
* zeroing extra byte above.
*/
port->guc_options = NIL;
while (offset < len)
{
char *nameptr = ((char *) buf) + offset;
int32 valoffset;
char *valptr;
if (*nameptr == '\0')
break; /* found packet terminator */
valoffset = offset + strlen(nameptr) + 1;
if (valoffset >= len)
break; /* missing value, will complain below */
valptr = ((char *) buf) + valoffset;
if (strcmp(nameptr, "database") == 0)
port->database_name = pstrdup(valptr);
else if (strcmp(nameptr, "user") == 0)
port->user_name = pstrdup(valptr);
else if (strcmp(nameptr, "options") == 0)
port->cmdline_options = pstrdup(valptr);
else if (strcmp(nameptr, "gpqeid") == 0)
{
gpqeid = valptr;
/*
* Normally we do not need set this on QE nodes since QE
* postmaster should be launched with GP_ROLE_EXECUTE, but in
* the entrydb and the gpexpand case, still need to set this.
*/
Gp_role = GP_ROLE_EXECUTE;
}
else if (strcmp(nameptr, "replication") == 0)
{
/*
* Due to backward compatibility concerns the replication
* parameter is a hybrid beast which allows the value to be
* either boolean or the string 'database'. The latter
* connects to a specific database which is e.g. required for
* logical decoding while.
*/
if (strcmp(valptr, "database") == 0)
{
am_walsender = true;
am_db_walsender = true;
}
else if (!parse_bool(valptr, &am_walsender))
ereport(FATAL,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("invalid value for parameter \"%s\": \"%s\"",
"replication",
valptr),
errhint("Valid values are: \"false\", 0, \"true\", 1, \"database\".")));
}
else if (strncmp(nameptr, "_pq_.", 5) == 0)
{
/*
* Any option beginning with _pq_. is reserved for use as a
* protocol-level option, but at present no such options are
* defined.
*/
unrecognized_protocol_options =
lappend(unrecognized_protocol_options, pstrdup(nameptr));
}
else if (strcmp(nameptr, GPCONN_TYPE) == 0)
{
am_mirror = IsRoleMirror();
if (strcmp(valptr, GPCONN_TYPE_FTS) == 0)
{
if (IS_QUERY_DISPATCHER())
ereport(FATAL,
(errcode(ERRCODE_PROTOCOL_VIOLATION),
errmsg("cannot handle FTS connection on master")));
am_ftshandler = true;
#ifdef FAULT_INJECTOR
if (FaultInjector_InjectFaultIfSet(
"fts_conn_startup_packet",
DDLNotSpecified,
"" /* databaseName */,
"" /* tableName */) == FaultInjectorTypeSkip)
{
/*
* If this fault is set to skip, report recovery is
* hung. Without this fault recovery is reported as
* progressing.
*/
if (FaultInjector_InjectFaultIfSet(
"fts_recovery_in_progress",
DDLNotSpecified,
"" /* databaseName */,
"" /* tableName */) == FaultInjectorTypeSkip)
{
recptr = last_xlog_replay_location();
}
else
{
time_t counter = time(NULL);
recptr = counter;
}
ereport(FATAL,
(errcode(ERRCODE_CANNOT_CONNECT_NOW),
errmsg(POSTMASTER_IN_RECOVERY_MSG),
errdetail(POSTMASTER_IN_RECOVERY_DETAIL_MSG " %X/%X",
(uint32) (recptr >> 32), (uint32) recptr)));
}
#endif
}
#ifdef FAULT_INJECTOR
else if (strcmp(valptr, GPCONN_TYPE_FAULT) == 0)
am_faulthandler = true;
#endif
else
ereport(FATAL,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("invalid value for option: \"%s\"", GPCONN_TYPE)));
}
else if (strcmp(nameptr, "diff_options") == 0)
{
port->diff_options = pstrdup(valptr);
}
else
{
/* Assume it's a generic GUC option */
port->guc_options = lappend(port->guc_options,
pstrdup(nameptr));
port->guc_options = lappend(port->guc_options,
pstrdup(valptr));
/*
* Copy application_name to port if we come across it. This
* is done so we can log the application_name in the
* connection authorization message. Note that the GUC would
* be used but we haven't gone through GUC setup yet.
*/
if (strcmp(nameptr, "application_name") == 0)
{
char *tmp_app_name = pstrdup(valptr);
pg_clean_ascii(tmp_app_name);
port->application_name = tmp_app_name;
}
}
offset = valoffset + strlen(valptr) + 1;
}
/*
* If we didn't find a packet terminator exactly at the end of the
* given packet length, complain.
*/
if (offset != len - 1)
ereport(FATAL,
(errcode(ERRCODE_PROTOCOL_VIOLATION),
errmsg("invalid startup packet layout: expected terminator as last byte")));
/*
* If the client requested a newer protocol version or if the client
* requested any protocol options we didn't recognize, let them know
* the newest minor protocol version we do support and the names of
* any unrecognized options.
*/
if (PG_PROTOCOL_MINOR(proto) > PG_PROTOCOL_MINOR(PG_PROTOCOL_LATEST) ||
unrecognized_protocol_options != NIL)
SendNegotiateProtocolVersion(unrecognized_protocol_options);
}
else
{
/*
* Get the parameters from the old-style, fixed-width-fields startup
* packet as C strings. The packet destination was cleared first so a
* short packet has zeros silently added. We have to be prepared to
* truncate the pstrdup result for oversize fields, though.
*/
StartupPacket *packet = (StartupPacket *) buf;
port->database_name = pstrdup(packet->database);
if (strlen(port->database_name) > sizeof(packet->database))
port->database_name[sizeof(packet->database)] = '\0';
port->user_name = pstrdup(packet->user);
if (strlen(port->user_name) > sizeof(packet->user))
port->user_name[sizeof(packet->user)] = '\0';
port->cmdline_options = pstrdup(packet->options);
if (strlen(port->cmdline_options) > sizeof(packet->options))
port->cmdline_options[sizeof(packet->options)] = '\0';
port->guc_options = NIL;
}
/* Check a user name was given. */
if (port->user_name == NULL || port->user_name[0] == '\0')
ereport(FATAL,
(errcode(ERRCODE_INVALID_AUTHORIZATION_SPECIFICATION),
errmsg("no PostgreSQL user name specified in startup packet")));
/* The database defaults to the user name. */
if (port->database_name == NULL || port->database_name[0] == '\0')
port->database_name = pstrdup(port->user_name);
if (Db_user_namespace)
{
/*
* If user@, it is a global user, remove '@'. We only want to do this
* if there is an '@' at the end and no earlier in the user string or
* they may fake as a local user of another database attaching to this
* database.
*/
if (strchr(port->user_name, '@') ==
port->user_name + strlen(port->user_name) - 1)
*strchr(port->user_name, '@') = '\0';
else
{
/* Append '@' and dbname */
port->user_name = psprintf("%s@%s", port->user_name, port->database_name);
}
}
/*
* Truncate given database and user names to length of a Postgres name.
* This avoids lookup failures when overlength names are given.
*/
if (strlen(port->database_name) >= NAMEDATALEN)
port->database_name[NAMEDATALEN - 1] = '\0';
if (strlen(port->user_name) >= NAMEDATALEN)
port->user_name[NAMEDATALEN - 1] = '\0';
/*
* Normal walsender backends, e.g. for streaming replication, are not
* connected to a particular database. But walsenders used for logical
* replication need to connect to a specific database. We allow streaming
* replication commands to be issued even if connected to a database as it
* can make sense to first make a basebackup and then stream changes
* starting from that.
*/
if ((am_walsender && !am_db_walsender) || am_ftshandler || am_faulthandler)
port->database_name[0] = '\0';
/*
* CDB: Process "gpqeid" parameter string for qExec startup.
*/
if (gpqeid)
cdbgang_parse_gpqeid_params(port, gpqeid);
/*
* Done putting stuff in TopMemoryContext.
*/
MemoryContextSwitchTo(oldcontext);
/*
* If we're going to reject the connection due to database state, say so
* now instead of wasting cycles on an authentication exchange. (This also
* allows a pg_ping utility to be written.)
*/
switch (port->canAcceptConnections)
{
case CAC_STARTUP:
if ((am_ftshandler || am_faulthandler) && am_mirror)
break;
recptr = last_xlog_replay_location();
ereport(FATAL,
(errcode(ERRCODE_CANNOT_CONNECT_NOW),
errmsg(POSTMASTER_IN_STARTUP_MSG),
errdetail(POSTMASTER_IN_RECOVERY_DETAIL_MSG " %X/%X",
(uint32) (recptr >> 32), (uint32) recptr)));
break;
case CAC_SHUTDOWN:
ereport(FATAL,
(errcode(ERRCODE_CANNOT_CONNECT_NOW),
errmsg("the database system is shutting down")));
break;
case CAC_RECOVERY:
recptr = last_xlog_replay_location();
ereport(FATAL,
(errcode(ERRCODE_CANNOT_CONNECT_NOW),
errmsg(POSTMASTER_IN_RECOVERY_MSG),
errdetail(POSTMASTER_IN_RECOVERY_DETAIL_MSG " %X/%X",
(uint32) (recptr >> 32), (uint32) recptr)));
break;
case CAC_RESET:
ereport(FATAL,
(errcode(ERRCODE_CANNOT_CONNECT_NOW),
errmsg(POSTMASTER_IN_RESET_MSG)));
break;
case CAC_TOOMANY:
ereport(FATAL,
(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
errmsg("sorry, too many clients already")));
break;
case CAC_WAITBACKUP:
/* Greenplum does not currently use WAITBACKUP state. */
Assert(port->canAcceptConnections != CAC_WAITBACKUP);
break;
case CAC_MIRROR_READY:
if (am_ftshandler || am_faulthandler)
{
/* Even if the connection state is MIRROR_READY, the role
* may change to primary during promoting. Hence, we need
* to decline this connection to avoid confusion. This needs
* to wait until promotion is finished and pmState changed
* to PM_RUN.
*/
if (!am_mirror)
ereport(FATAL,
(errmsg("mirror is being promoted.")));
break;
}
/*
* Allow connections if hot_standby is on and our postmaster is
* acting as a standby.
*/
if (EnableHotStandby)
break;
recptr = last_xlog_replay_location();
ereport(FATAL,
(errcode(ERRCODE_MIRROR_READY),
errmsg(POSTMASTER_IN_RECOVERY_MSG),
errdetail(POSTMASTER_IN_RECOVERY_DETAIL_MSG " %X/%X\n"
POSTMASTER_MIRROR_VERSION_DETAIL_MSG " %s",
(uint32) (recptr >> 32), (uint32) recptr,
TextDatumGetCString(pgsql_version(NULL)))));
break;
case CAC_OK:
break;
}
#ifdef FAULT_INJECTOR
if (!am_ftshandler && !am_faulthandler && !am_walsender &&
FaultInjector_InjectFaultIfSet("process_startup_packet",
DDLNotSpecified,
port->database_name /* databaseName */,
"" /* tableName */) == FaultInjectorTypeSkip)
{
ereport(FATAL,
(errcode(ERRCODE_CANNOT_CONNECT_NOW),
errmsg(POSTMASTER_IN_RECOVERY_MSG),
errdetail(POSTMASTER_IN_RECOVERY_DETAIL_MSG " dummy location")));
}
#endif
return STATUS_OK;
}
/*
* Send a NegotiateProtocolVersion to the client. This lets the client know
* that they have requested a newer minor protocol version than we are able
* to speak. We'll speak the highest version we know about; the client can,
* of course, abandon the connection if that's a problem.
*
* We also include in the response a list of protocol options we didn't
* understand. This allows clients to include optional parameters that might
* be present either in newer protocol versions or third-party protocol
* extensions without fear of having to reconnect if those options are not
* understood, while at the same time making certain that the client is aware
* of which options were actually accepted.
*/
static void
SendNegotiateProtocolVersion(List *unrecognized_protocol_options)
{
StringInfoData buf;
ListCell *lc;
pq_beginmessage(&buf, 'v'); /* NegotiateProtocolVersion */
pq_sendint32(&buf, PG_PROTOCOL_LATEST);
pq_sendint32(&buf, list_length(unrecognized_protocol_options));
foreach(lc, unrecognized_protocol_options)
pq_sendstring(&buf, lfirst(lc));
pq_endmessage(&buf);
/* no need to flush, some other message will follow */
}
/*
* The client has sent a cancel request packet, not a normal
* start-a-new-connection packet. Perform the necessary processing.
* Nothing is sent back to the client.
*/
static void
processCancelRequest(Port *port, void *pkt, MsgType code)
{
CancelRequestPacket *canc = (CancelRequestPacket *) pkt;
int backendPID;
int32 cancelAuthCode;
Backend *bp;
#ifndef EXEC_BACKEND
dlist_iter iter;
#else
int i;
#endif
backendPID = (int) pg_ntoh32(canc->backendPID);
cancelAuthCode = (int32) pg_ntoh32(canc->cancelAuthCode);
/*
* See if we have a matching backend. In the EXEC_BACKEND case, we can no
* longer access the postmaster's own backend list, and must rely on the
* duplicate array in shared memory.
*/
#ifndef EXEC_BACKEND
dlist_foreach(iter, &BackendList)
{
bp = dlist_container(Backend, elem, iter.cur);
#else
for (i = MaxLivePostmasterChildren() - 1; i >= 0; i--)
{
bp = (Backend *) &ShmemBackendArray[i];
#endif
if (bp->pid == backendPID)
{
if (bp->cancel_key == cancelAuthCode)
{
/* Found a match; signal that backend to cancel current op */
if (code == FINISH_REQUEST_CODE)
{
ereport(LOG,
(errmsg_internal("query finish request to process %d",
backendPID)));
SendProcSignal(bp->pid, PROCSIG_QUERY_FINISH,
InvalidBackendId);
}
else
{
ereport(DEBUG2,
(errmsg_internal("processing cancel request: sending SIGINT to process %d",
backendPID)));
signal_child(bp->pid, SIGINT);
}
}
else
/* Right PID, wrong key: no way, Jose */
ereport(LOG,
(errmsg("wrong key in cancel request for process %d",
backendPID)));
return;
}
#ifndef EXEC_BACKEND /* make GNU Emacs 26.1 see brace balance */
}
#else
}
#endif
/* No matching backend */
ereport(LOG,
(errmsg("PID %d in cancel request did not match any process",
backendPID)));
}
/*
* canAcceptConnections --- check to see if database state allows connections.
*/
static CAC_state
canAcceptConnections(void)
{
CAC_state result = CAC_OK;
/*
* Can't start backends when in startup/shutdown/inconsistent recovery
* state.
*
* In state PM_WAIT_BACKUP only superusers can connect (this must be
* allowed so that a superuser can end online backup mode); we return
* CAC_WAITBACKUP code to indicate that this must be checked later. Note
* that neither CAC_OK nor CAC_WAITBACKUP can safely be returned until we
* have checked for too many children.
*/
if (pmState != PM_RUN)
{
if (pmState == PM_WAIT_BACKUP)
result = CAC_WAITBACKUP; /* allow superusers only */
else if (Shutdown > NoShutdown)
return CAC_SHUTDOWN; /* shutdown is pending */
/*
* If the wal receiver has been launched at least once, return that
* the mirror is ready.
*/
else if (GetMirrorReadyFlag())
return CAC_MIRROR_READY;
else if (!FatalError &&
(pmState == PM_STARTUP ||
pmState == PM_RECOVERY))
return CAC_STARTUP; /* normal startup */
else if (!FatalError &&
pmState == PM_HOT_STANDBY)
result = CAC_OK; /* connection OK during hot standby */
else if (pmState == PM_STARTUP || pmState == PM_RECOVERY)
return CAC_RECOVERY; /* else must be crash recovery */
else
/*
* otherwise must be resetting: could be PM_WAIT_BACKENDS,
* PM_WAIT_DEAD_END or PM_NO_CHILDREN.
*/
return CAC_RESET;
}
/*
* Don't start too many children.
*
* We allow more connections than we can have backends here because some
* might still be authenticating; they might fail auth, or some existing
* backend might exit before the auth cycle is completed. The exact
* MaxBackends limit is enforced when a new backend tries to join the
* shared-inval backend array.
*
* The limit here must match the sizes of the per-child-process arrays;
* see comments for MaxLivePostmasterChildren().
*/
if (CountChildren(BACKEND_TYPE_ALL) >= MaxLivePostmasterChildren())
result = CAC_TOOMANY;
return result;
}
/*
* ConnCreate -- create a local connection data structure
*
* Returns NULL on failure, other than out-of-memory which is fatal.
*/
static Port *
ConnCreate(int serverFd)
{
Port *port;
if (!(port = (Port *) calloc(1, sizeof(Port))))
{
ereport(LOG,
(errcode(ERRCODE_OUT_OF_MEMORY),
errmsg("out of memory")));
ExitPostmaster(1);
}
if (StreamConnection(serverFd, port) != STATUS_OK)
{
if (port->sock != PGINVALID_SOCKET)
StreamClose(port->sock);
ConnFree(port);
return NULL;
}
/*
* Allocate GSSAPI specific state struct
*/
#ifndef EXEC_BACKEND
#if defined(ENABLE_GSS) || defined(ENABLE_SSPI)
port->gss = (pg_gssinfo *) calloc(1, sizeof(pg_gssinfo));
if (!port->gss)
{
ereport(LOG,
(errcode(ERRCODE_OUT_OF_MEMORY),
errmsg("out of memory")));
ExitPostmaster(1);
}
#endif
#endif
return port;
}
/*
* ConnFree -- free a local connection data structure
*/
static void
ConnFree(Port *conn)
{
#ifdef USE_SSL
secure_close(conn);
#endif
if (conn->gss)
free(conn->gss);
free(conn);
}
/*
* ClosePostmasterPorts -- close all the postmaster's open sockets
*
* This is called during child process startup to release file descriptors
* that are not needed by that child process. The postmaster still has
* them open, of course.
*
* Note: we pass am_syslogger as a boolean because we don't want to set
* the global variable yet when this is called.
*/
void
ClosePostmasterPorts(bool am_syslogger)
{
int i;
#ifndef WIN32
/*
* Close the write end of postmaster death watch pipe. It's important to
* do this as early as possible, so that if postmaster dies, others won't
* think that it's still running because we're holding the pipe open.
*/
if (close(postmaster_alive_fds[POSTMASTER_FD_OWN]))
ereport(FATAL,
(errcode_for_file_access(),
errmsg_internal("could not close postmaster death monitoring pipe in child process: %m")));
postmaster_alive_fds[POSTMASTER_FD_OWN] = -1;
#endif
/* Close the listen sockets */
for (i = 0; i < MAXLISTEN; i++)
{
if (ListenSocket[i] != PGINVALID_SOCKET)
{
StreamClose(ListenSocket[i]);
ListenSocket[i] = PGINVALID_SOCKET;
}
}
/* If using syslogger, close the read side of the pipe */
if (!am_syslogger)
{
#ifndef WIN32
if (syslogPipe[0] >= 0)
close(syslogPipe[0]);
syslogPipe[0] = -1;
#else
if (syslogPipe[0])
CloseHandle(syslogPipe[0]);
syslogPipe[0] = 0;
#endif
}
#ifdef USE_BONJOUR
/* If using Bonjour, close the connection to the mDNS daemon */
if (bonjour_sdref)
close(DNSServiceRefSockFD(bonjour_sdref));
#endif
}
/*
* InitProcessGlobals -- set MyProcPid, MyStartTime[stamp], random seeds
*
* Called early in the postmaster and every backend.
*/
void
InitProcessGlobals(void)
{
unsigned int rseed;
MyProcPid = getpid();
MyStartTimestamp = GetCurrentTimestamp();
MyStartTime = timestamptz_to_time_t(MyStartTimestamp);
/*
* Set a different seed for random() in every process. We want something
* unpredictable, so if possible, use high-quality random bits for the
* seed. Otherwise, fall back to a seed based on timestamp and PID.
*/
if (!pg_strong_random(&rseed, sizeof(rseed)))
{
/*
* Since PIDs and timestamps tend to change more frequently in their
* least significant bits, shift the timestamp left to allow a larger
* total number of seeds in a given time period. Since that would
* leave only 20 bits of the timestamp that cycle every ~1 second,
* also mix in some higher bits.
*/
rseed = ((uint64) MyProcPid) ^
((uint64) MyStartTimestamp << 12) ^
((uint64) MyStartTimestamp >> 20);
}
srandom(rseed);
}
/*
* reset_shared -- reset shared memory and semaphores
*/
static void
reset_shared(int port)
{
/*
* Create or re-create shared memory and semaphores.
*
* Note: in each "cycle of life" we will normally assign the same IPC keys
* (if using SysV shmem and/or semas), since the port number is used to
* determine IPC keys. This helps ensure that we will clean up dead IPC
* objects if the postmaster crashes and is restarted.
*/
CreateSharedMemoryAndSemaphores(port);
}
/*
* SIGHUP -- reread config files, and tell children to do same
*/
static void
SIGHUP_handler(SIGNAL_ARGS)
{
int save_errno = errno;
PG_SETMASK(&BlockSig);
if (Shutdown <= SmartShutdown)
{
ereport(LOG,
(errmsg("received SIGHUP, reloading configuration files")));
ProcessConfigFile(PGC_SIGHUP);
SignalChildren(SIGHUP);
if (StartupPID != 0)
signal_child(StartupPID, SIGHUP);
if (BgWriterPID != 0)
signal_child(BgWriterPID, SIGHUP);
if (CheckpointerPID != 0)
signal_child(CheckpointerPID, SIGHUP);
if (WalWriterPID != 0)
signal_child(WalWriterPID, SIGHUP);
if (WalReceiverPID != 0)
signal_child(WalReceiverPID, SIGHUP);
if (AutoVacPID != 0)
signal_child(AutoVacPID, SIGHUP);
if (PgArchPID != 0)
signal_child(PgArchPID, SIGHUP);
if (SysLoggerPID != 0)
signal_child(SysLoggerPID, SIGHUP);
if (PgStatPID != 0)
signal_child(PgStatPID, SIGHUP);
/* Reload authentication config files too */
if (!load_hba())
ereport(LOG,
/* translator: %s is a configuration file */
(errmsg("%s was not reloaded", "pg_hba.conf")));
if (!load_ident())
ereport(LOG,
(errmsg("%s was not reloaded", "pg_ident.conf")));
#ifdef USE_SSL
/* Reload SSL configuration as well */
if (EnableSSL)
{
if (secure_initialize(false) == 0)
LoadedSSL = true;
else
ereport(LOG,
(errmsg("SSL configuration was not reloaded")));
}
else
{
secure_destroy();
LoadedSSL = false;
}
#endif
#ifdef EXEC_BACKEND
/* Update the starting-point file for future children */
write_nondefault_variables(PGC_SIGHUP);
#endif
}
PG_SETMASK(&UnBlockSig);
errno = save_errno;
}
/*
* pmdie -- signal handler for processing various postmaster signals.
*/
static void
pmdie(SIGNAL_ARGS)
{
int save_errno = errno;
PG_SETMASK(&BlockSig);
ereport(DEBUG2,
(errmsg_internal("postmaster received signal %d",
postgres_signal_arg)));
switch (postgres_signal_arg)
{
case SIGTERM:
/*
* Smart Shutdown:
*
* Wait for children to end their work, then shut down.
*/
if (Shutdown >= SmartShutdown)
break;
Shutdown = SmartShutdown;
ereport(LOG,
(errmsg("received smart shutdown request")));
/* Report status */
AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_STOPPING);
#ifdef USE_SYSTEMD
sd_notify(0, "STOPPING=1");
#endif
if (pmState == PM_STARTUP)
{
/*
* If this is a standby or mirror, clean-up the startup and
* walreceiver processes.
*/
if (StartupPID != 0)
signal_child(StartupPID, SIGTERM);
if (WalReceiverPID != 0)
signal_child(WalReceiverPID, SIGTERM);
/*
* Keep the PM_STARTUP and let the PostmasterStateMachine handle
* state transition after Startup and WalReceiver die.
*/
}
if (pmState == PM_RUN || pmState == PM_RECOVERY ||
pmState == PM_HOT_STANDBY || pmState == PM_STARTUP)
{
/* autovac workers are told to shut down immediately */
/* and bgworkers too; does this need tweaking? */
SignalSomeChildren(SIGTERM,
BACKEND_TYPE_AUTOVAC | BACKEND_TYPE_BGWORKER);
/* and the autovac launcher too */
if (AutoVacPID != 0)
signal_child(AutoVacPID, SIGTERM);
/* and the bgwriter too */
if (BgWriterPID != 0)
signal_child(BgWriterPID, SIGTERM);
/* and the walwriter too */
if (WalWriterPID != 0)
signal_child(WalWriterPID, SIGTERM);
/*
* If we're in recovery, we can't kill the startup process
* right away, because at present doing so does not release
* its locks. We might want to change this in a future
* release. For the time being, the PM_WAIT_READONLY state
* indicates that we're waiting for the regular (read only)
* backends to die off; once they do, we'll kill the startup
* and walreceiver processes.
*/
pmState = (pmState == PM_RUN) ?
PM_WAIT_BACKUP : PM_WAIT_READONLY;
}
/*
* Now wait for online backup mode to end and backends to exit. If
* that is already the case, PostmasterStateMachine will take the
* next step.
*/
PostmasterStateMachine();
break;
case SIGINT:
/*
* Fast Shutdown:
*
* Abort all children with SIGTERM (rollback active transactions
* and exit) and shut down when they are gone.
*/
if (Shutdown >= FastShutdown)
break;
Shutdown = FastShutdown;
ereport(LOG,
(errmsg("received fast shutdown request")));
/* Report status */
AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_STOPPING);
#ifdef USE_SYSTEMD
sd_notify(0, "STOPPING=1");
#endif
if (StartupPID != 0)
signal_child(StartupPID, SIGTERM);
if (BgWriterPID != 0)
signal_child(BgWriterPID, SIGTERM);
if (WalReceiverPID != 0)
signal_child(WalReceiverPID, SIGTERM);
if (pmState == PM_STARTUP || pmState == PM_RECOVERY)
{
SignalSomeChildren(SIGTERM, BACKEND_TYPE_BGWORKER);
/*
* Only startup, bgwriter, walreceiver, possibly bgworkers,
* and/or checkpointer should be active in this state; we just
* signaled the first four, and we don't want to kill
* checkpointer yet.
*/
pmState = PM_WAIT_BACKENDS;
}
else if (pmState == PM_RUN ||
pmState == PM_WAIT_BACKUP ||
pmState == PM_WAIT_READONLY ||
pmState == PM_WAIT_BACKENDS ||
pmState == PM_HOT_STANDBY)
{
ereport(LOG,
(errmsg("aborting any active transactions")));
/* shut down all backends and workers */
SignalSomeChildren(SIGTERM,
BACKEND_TYPE_NORMAL | BACKEND_TYPE_AUTOVAC |
BACKEND_TYPE_BGWORKER);
/* and the autovac launcher too */
if (AutoVacPID != 0)
signal_child(AutoVacPID, SIGTERM);
/* and the bgwriter too */
if (BgWriterPID != 0)
signal_child(BgWriterPID, SIGTERM);
/* and the walwriter too */
if (WalWriterPID != 0)
signal_child(WalWriterPID, SIGTERM);
pmState = PM_WAIT_BACKENDS;
}
/*
* Now wait for backends to exit. If there are none,
* PostmasterStateMachine will take the next step.
*/
PostmasterStateMachine();
break;
case SIGQUIT:
/*
* Immediate Shutdown:
*
* abort all children with SIGQUIT, wait for them to exit,
* terminate remaining ones with SIGKILL, then exit without
* attempt to properly shut down the data base system.
*/
if (Shutdown >= ImmediateShutdown)
break;
Shutdown = ImmediateShutdown;
ereport(LOG,
(errmsg("received immediate shutdown request")));
/* Report status */
AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_STOPPING);
#ifdef USE_SYSTEMD
sd_notify(0, "STOPPING=1");
#endif
TerminateChildren(SIGQUIT);
pmState = PM_WAIT_BACKENDS;
/* set stopwatch for them to die */
AbortStartTime = time(NULL);
/*
* Now wait for backends to exit. If there are none,
* PostmasterStateMachine will take the next step.
*/
PostmasterStateMachine();
break;
}
PG_SETMASK(&UnBlockSig);
errno = save_errno;
}
/*
* Reaper -- signal handler to cleanup after a child process dies.
*/
static void
reaper(SIGNAL_ARGS)
{
int save_errno = errno;
int pid; /* process id of dead child process */
int exitstatus; /* its exit status */
PG_SETMASK(&BlockSig);
ereport(DEBUG4,
(errmsg_internal("reaping dead processes")));
while ((pid = waitpid(-1, &exitstatus, WNOHANG)) > 0)
{
/*
* Check if this child was a startup process.
*/
if (pid == StartupPID)
{
StartupPID = 0;
/*
* Startup process exited in response to a shutdown request (or it
* completed normally regardless of the shutdown request).
*/
if (Shutdown > NoShutdown &&
(EXIT_STATUS_0(exitstatus) || EXIT_STATUS_1(exitstatus)))
{
StartupStatus = STARTUP_NOT_RUNNING;
pmState = PM_WAIT_BACKENDS;
/* PostmasterStateMachine logic does the rest */
continue;
}
if (EXIT_STATUS_3(exitstatus))
{
ereport(LOG,
(errmsg("shutdown at recovery target")));
StartupStatus = STARTUP_NOT_RUNNING;
Shutdown = SmartShutdown;
TerminateChildren(SIGTERM);
pmState = PM_WAIT_BACKENDS;
/* PostmasterStateMachine logic does the rest */
continue;
}
/*
* Unexpected exit of startup process (including FATAL exit)
* during PM_STARTUP is treated as catastrophic. There are no
* other processes running yet, so we can just exit.
*/
if (pmState == PM_STARTUP && !EXIT_STATUS_0(exitstatus))
{
LogChildExit(LOG, _("startup process"),
pid, exitstatus);
ereport(LOG,
(errmsg("aborting startup due to startup process failure")));
ExitPostmaster(1);
}
/*
* After PM_STARTUP, any unexpected exit (including FATAL exit) of
* the startup process is catastrophic, so kill other children,
* and set StartupStatus so we don't try to reinitialize after
* they're gone. Exception: if StartupStatus is STARTUP_SIGNALED,
* then we previously sent the startup process a SIGQUIT; so
* that's probably the reason it died, and we do want to try to
* restart in that case.
*/
if (!EXIT_STATUS_0(exitstatus))
{
if (StartupStatus == STARTUP_SIGNALED)
StartupStatus = STARTUP_NOT_RUNNING;
else
StartupStatus = STARTUP_CRASHED;
HandleChildCrash(pid, exitstatus,
_("startup process"));
continue;
}
/*
* Startup succeeded, commence normal operations
*/
StartupStatus = STARTUP_NOT_RUNNING;
FatalError = false;
Assert(AbortStartTime == 0);
ReachedNormalRunning = true;
pmState = PM_RUN;
/*
* Crank up the background tasks, if we didn't do that already
* when we entered consistent recovery state. It doesn't matter
* if this fails, we'll just try again later.
*/
if (CheckpointerPID == 0)
CheckpointerPID = StartCheckpointer();
if (BgWriterPID == 0)
BgWriterPID = StartBackgroundWriter();
if (WalWriterPID == 0)
WalWriterPID = StartWalWriter();
/*
* Likewise, start other special children as needed. In a restart
* situation, some of them may be alive already.
*/
if (!IsBinaryUpgrade && AutoVacuumingActive() && AutoVacPID == 0)
AutoVacPID = StartAutoVacLauncher();
if (PgArchStartupAllowed() && PgArchPID == 0)
PgArchPID = pgarch_start();
if (PgStatPID == 0)
PgStatPID = pgstat_start();
/* workers may be scheduled to start now */
maybe_start_bgworkers();
/* at this point we are really open for business */
{
char version[512];
strlcpy(version, PG_VERSION_STR " compiled on " __DATE__ " " __TIME__,
sizeof(version));
#ifdef USE_ASSERT_CHECKING
strlcat(version, " (with assert checking)", sizeof(version));
#endif
ereport(LOG,(errmsg("%s", version)));
ereport(LOG,
(errmsg("database system is ready to accept connections"),
errdetail("%s",version)));
PMAcceptingConnectionsStartTime = (pg_time_t) time(NULL);
}
/* Report status */
AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_READY);
#ifdef USE_SYSTEMD
sd_notify(0, "READY=1");
#endif
continue;
}
/*
* Was it the bgwriter? Normal exit can be ignored; we'll start a new
* one at the next iteration of the postmaster's main loop, if
* necessary. Any other exit condition is treated as a crash.
*/
if (pid == BgWriterPID)
{
BgWriterPID = 0;
if (!EXIT_STATUS_0(exitstatus))
HandleChildCrash(pid, exitstatus,
_("background writer process"));
continue;
}
/*
* Was it the checkpointer?
*/
if (pid == CheckpointerPID)
{
CheckpointerPID = 0;
if (EXIT_STATUS_0(exitstatus) && pmState == PM_SHUTDOWN)
{
/*
* OK, we saw normal exit of the checkpointer after it's been
* told to shut down. We expect that it wrote a shutdown
* checkpoint. (If for some reason it didn't, recovery will
* occur on next postmaster start.)
*
* At this point we should have no normal backend children
* left (else we'd not be in PM_SHUTDOWN state) but we might
* have dead_end children to wait for.
*
* If we have an archiver subprocess, tell it to do a last
* archive cycle and quit. Likewise, if we have walsender
* processes, tell them to send any remaining WAL and quit.
*/
Assert(Shutdown > NoShutdown);
/* Waken archiver for the last time */
if (PgArchPID != 0)
signal_child(PgArchPID, SIGUSR2);
/*
* Waken walsenders for the last time. No regular backends
* should be around anymore.
*/
SignalChildren(SIGUSR2);
pmState = PM_SHUTDOWN_2;
/*
* We can also shut down the stats collector now; there's
* nothing left for it to do.
*/
if (PgStatPID != 0)
signal_child(PgStatPID, SIGQUIT);
}
else
{
/*
* Any unexpected exit of the checkpointer (including FATAL
* exit) is treated as a crash.
*/
HandleChildCrash(pid, exitstatus,
_("checkpointer process"));
}
continue;
}
/*
* Was it the wal writer? Normal exit can be ignored; we'll start a
* new one at the next iteration of the postmaster's main loop, if
* necessary. Any other exit condition is treated as a crash.
*/
if (pid == WalWriterPID)
{
WalWriterPID = 0;
if (!EXIT_STATUS_0(exitstatus))
HandleChildCrash(pid, exitstatus,
_("WAL writer process"));
continue;
}
/*
* Was it the wal receiver? If exit status is zero (normal) or one
* (FATAL exit), we assume everything is all right just like normal
* backends. (If we need a new wal receiver, we'll start one at the
* next iteration of the postmaster's main loop.)
*/
if (pid == WalReceiverPID)
{
WalReceiverPID = 0;
if (!EXIT_STATUS_0(exitstatus) && !EXIT_STATUS_1(exitstatus))
HandleChildCrash(pid, exitstatus,
_("WAL receiver process"));
continue;
}
/*
* Was it the autovacuum launcher? Normal exit can be ignored; we'll
* start a new one at the next iteration of the postmaster's main
* loop, if necessary. Any other exit condition is treated as a
* crash.
*/
if (pid == AutoVacPID)
{
AutoVacPID = 0;
if (!EXIT_STATUS_0(exitstatus) && !EXIT_STATUS_1(exitstatus))
HandleChildCrash(pid, exitstatus,
_("autovacuum launcher process"));
continue;
}
/*
* Was it the archiver? If so, just try to start a new one; no need
* to force reset of the rest of the system. (If fail, we'll try
* again in future cycles of the main loop.). Unless we were waiting
* for it to shut down; don't restart it in that case, and
* PostmasterStateMachine() will advance to the next shutdown step.
*/
if (pid == PgArchPID)
{
PgArchPID = 0;
if (!EXIT_STATUS_0(exitstatus))
LogChildExit(LOG, _("archiver process"),
pid, exitstatus);
if (PgArchStartupAllowed())
PgArchPID = pgarch_start();
continue;
}
/*
* Was it the statistics collector? If so, just try to start a new
* one; no need to force reset of the rest of the system. (If fail,
* we'll try again in future cycles of the main loop.)
*/
if (pid == PgStatPID)
{
PgStatPID = 0;
if (!EXIT_STATUS_0(exitstatus))
LogChildExit(LOG, _("statistics collector process"),
pid, exitstatus);
if (pmState == PM_RUN || pmState == PM_HOT_STANDBY)
PgStatPID = pgstat_start();
continue;
}
/* Was it the system logger? If so, try to start a new one */
if (pid == SysLoggerPID)
{
SysLoggerPID = 0;
/* for safety's sake, launch new logger *first* */
SysLoggerPID = SysLogger_Start();
if (!EXIT_STATUS_0(exitstatus))
LogChildExit(LOG, _("system logger process"),
pid, exitstatus);
continue;
}
/* Was it one of our background workers? */
if (CleanupBackgroundWorker(pid, exitstatus))
{
/* have it be restarted */
HaveCrashedWorker = true;
continue;
}
/*
* Else do standard backend child cleanup.
*/
CleanupBackend(pid, exitstatus);
} /* loop over pending child-death reports */
/*
* After cleaning out the SIGCHLD queue, see if we have any state changes
* or actions to make.
*/
PostmasterStateMachine();
/* Done with signal handler */
PG_SETMASK(&UnBlockSig);
errno = save_errno;
}
/*
* Scan the bgworkers list and see if the given PID (which has just stopped
* or crashed) is in it. Handle its shutdown if so, and return true. If not a
* bgworker, return false.
*
* This is heavily based on CleanupBackend. One important difference is that
* we don't know yet that the dying process is a bgworker, so we must be silent
* until we're sure it is.
*/
static bool
CleanupBackgroundWorker(int pid,
int exitstatus) /* child's exit status */
{
char namebuf[MAXPGPATH];
slist_mutable_iter iter;
slist_foreach_modify(iter, &BackgroundWorkerList)
{
RegisteredBgWorker *rw;
rw = slist_container(RegisteredBgWorker, rw_lnode, iter.cur);
if (rw->rw_pid != pid)
continue;
#ifdef WIN32
/* see CleanupBackend */
if (exitstatus == ERROR_WAIT_NO_CHILDREN)
exitstatus = 0;
#endif
snprintf(namebuf, MAXPGPATH, _("background worker \"%s\""),
rw->rw_worker.bgw_type);
if (!EXIT_STATUS_0(exitstatus))
{
/* Record timestamp, so we know when to restart the worker. */
rw->rw_crashed_at = GetCurrentTimestamp();
}
else
{
/* Zero exit status means terminate */
rw->rw_crashed_at = 0;
rw->rw_terminate = true;
}
/*
* Additionally, for shared-memory-connected workers, just like a
* backend, any exit status other than 0 or 1 is considered a crash
* and causes a system-wide restart.
*/
if ((rw->rw_worker.bgw_flags & BGWORKER_SHMEM_ACCESS) != 0)
{
if (!EXIT_STATUS_0(exitstatus) && !EXIT_STATUS_1(exitstatus))
{
HandleChildCrash(pid, exitstatus, namebuf);
return true;
}
}
/*
* We must release the postmaster child slot whether this worker is
* connected to shared memory or not, but we only treat it as a crash
* if it is in fact connected.
*/
if (!ReleasePostmasterChildSlot(rw->rw_child_slot) &&
(rw->rw_worker.bgw_flags & BGWORKER_SHMEM_ACCESS) != 0)
{
HandleChildCrash(pid, exitstatus, namebuf);
return true;
}
/* Get it out of the BackendList and clear out remaining data */
dlist_delete(&rw->rw_backend->elem);
#ifdef EXEC_BACKEND
ShmemBackendArrayRemove(rw->rw_backend);
#endif
/*
* It's possible that this background worker started some OTHER
* background worker and asked to be notified when that worker started
* or stopped. If so, cancel any notifications destined for the
* now-dead backend.
*/
if (rw->rw_backend->bgworker_notify)
BackgroundWorkerStopNotifications(rw->rw_pid);
free(rw->rw_backend);
rw->rw_backend = NULL;
rw->rw_pid = 0;
rw->rw_child_slot = 0;
ReportBackgroundWorkerExit(&iter); /* report child death */
LogChildExit(EXIT_STATUS_0(exitstatus) ? DEBUG1 : LOG,
namebuf, pid, exitstatus);
return true;
}
return false;
}
/*
* CleanupBackend -- cleanup after terminated backend.
*
* Remove all local state associated with backend.
*
* If you change this, see also CleanupBackgroundWorker.
*/
static void
CleanupBackend(int pid,
int exitstatus) /* child's exit status. */
{
dlist_mutable_iter iter;
LogChildExit(DEBUG2, _("server process"), pid, exitstatus);
/*
* If a backend dies in an ugly way then we must signal all other backends
* to quickdie. If exit status is zero (normal) or one (FATAL exit), we
* assume everything is all right and proceed to remove the backend from
* the active backend list.
*/
#ifdef WIN32
/*
* On win32, also treat ERROR_WAIT_NO_CHILDREN (128) as nonfatal case,
* since that sometimes happens under load when the process fails to start
* properly (long before it starts using shared memory). Microsoft reports
* it is related to mutex failure:
* http://archives.postgresql.org/pgsql-hackers/2010-09/msg00790.php
*/
if (exitstatus == ERROR_WAIT_NO_CHILDREN)
{
LogChildExit(LOG, _("server process"), pid, exitstatus);
exitstatus = 0;
}
#endif
if (!EXIT_STATUS_0(exitstatus) && !EXIT_STATUS_1(exitstatus))
{
HandleChildCrash(pid, exitstatus, _("server process"));
return;
}
dlist_foreach_modify(iter, &BackendList)
{
Backend *bp = dlist_container(Backend, elem, iter.cur);
if (bp->pid == pid)
{
if (!bp->dead_end)
{
if (!ReleasePostmasterChildSlot(bp->child_slot))
{
/*
* Uh-oh, the child failed to clean itself up. Treat as a
* crash after all.
*/
HandleChildCrash(pid, exitstatus, _("server process"));
return;
}
#ifdef EXEC_BACKEND
ShmemBackendArrayRemove(bp);
#endif
}
if (bp->bgworker_notify)
{
/*
* This backend may have been slated to receive SIGUSR1 when
* some background worker started or stopped. Cancel those
* notifications, as we don't want to signal PIDs that are not
* PostgreSQL backends. This gets skipped in the (probably
* very common) case where the backend has never requested any
* such notifications.
*/
BackgroundWorkerStopNotifications(bp->pid);
}
dlist_delete(iter.cur);
free(bp);
break;
}
}
}
/*
* HandleChildCrash -- cleanup after failed backend, bgwriter, checkpointer,
* walwriter, autovacuum, or background worker.
*
* The objectives here are to clean up our local state about the child
* process, and to signal all other remaining children to quickdie.
*/
static void
HandleChildCrash(int pid, int exitstatus, const char *procname)
{
dlist_mutable_iter iter;
slist_iter siter;
Backend *bp;
bool take_action;
/*
* We only log messages and send signals if this is the first process
* crash and we're not doing an immediate shutdown; otherwise, we're only
* here to update postmaster's idea of live processes. If we have already
* signalled children, nonzero exit status is to be expected, so don't
* clutter log.
*/
take_action = !FatalError && Shutdown != ImmediateShutdown;
if (take_action)
{
LogChildExit(LOG, procname, pid, exitstatus);
ereport(LOG,
(errmsg("terminating any other active server processes")));
}
/* Process background workers. */
slist_foreach(siter, &BackgroundWorkerList)
{
RegisteredBgWorker *rw;
rw = slist_container(RegisteredBgWorker, rw_lnode, siter.cur);
if (rw->rw_pid == 0)
continue; /* not running */
if (rw->rw_pid == pid)
{
/*
* Found entry for freshly-dead worker, so remove it.
*/
(void) ReleasePostmasterChildSlot(rw->rw_child_slot);
dlist_delete(&rw->rw_backend->elem);
#ifdef EXEC_BACKEND
ShmemBackendArrayRemove(rw->rw_backend);
#endif
free(rw->rw_backend);
rw->rw_backend = NULL;
rw->rw_pid = 0;
rw->rw_child_slot = 0;
/* don't reset crashed_at */
/* don't report child stop, either */
/* Keep looping so we can signal remaining workers */
}
else
{
/*
* This worker is still alive. Unless we did so already, tell it
* to commit hara-kiri.
*
* SIGQUIT is the special signal that says exit without proc_exit
* and let the user know what's going on. But if SendStop is set
* (-s on command line), then we send SIGSTOP instead, so that we
* can get core dumps from all backends by hand.
*/
if (take_action)
{
ereport(DEBUG2,
(errmsg_internal("sending %s to process %d",
(SendStop ? "SIGSTOP" : "SIGQUIT"),
(int) rw->rw_pid)));
signal_child(rw->rw_pid, (SendStop ? SIGSTOP : SIGQUIT));
}
}
}
/* Process regular backends */
dlist_foreach_modify(iter, &BackendList)
{
bp = dlist_container(Backend, elem, iter.cur);
if (bp->pid == pid)
{
/*
* Found entry for freshly-dead backend, so remove it.
*/
if (!bp->dead_end)
{
(void) ReleasePostmasterChildSlot(bp->child_slot);
#ifdef EXEC_BACKEND
ShmemBackendArrayRemove(bp);
#endif
}
dlist_delete(iter.cur);
free(bp);
/* Keep looping so we can signal remaining backends */
}
else
{
/*
* This backend is still alive. Unless we did so already, tell it
* to commit hara-kiri.
*
* SIGQUIT is the special signal that says exit without proc_exit
* and let the user know what's going on. But if SendStop is set
* (-s on command line), then we send SIGSTOP instead, so that we
* can get core dumps from all backends by hand.
*
* We could exclude dead_end children here, but at least in the
* SIGSTOP case it seems better to include them.
*
* Background workers were already processed above; ignore them
* here.
*/
if (bp->bkend_type == BACKEND_TYPE_BGWORKER)
continue;
if (take_action)
{
ereport(DEBUG2,
(errmsg_internal("sending %s to process %d",
(SendStop ? "SIGSTOP" : "SIGQUIT"),
(int) bp->pid)));
signal_child(bp->pid, (SendStop ? SIGSTOP : SIGQUIT));
}
}
}
/* Take care of the startup process too */
if (pid == StartupPID)
{
StartupPID = 0;
StartupStatus = STARTUP_CRASHED;
}
else if (StartupPID != 0 && take_action)
{
ereport(DEBUG2,
(errmsg_internal("sending %s to process %d",
(SendStop ? "SIGSTOP" : "SIGQUIT"),
(int) StartupPID)));
signal_child(StartupPID, (SendStop ? SIGSTOP : SIGQUIT));
StartupStatus = STARTUP_SIGNALED;
}
/* Take care of the bgwriter too */
if (pid == BgWriterPID)
BgWriterPID = 0;
else if (BgWriterPID != 0 && take_action)
{
ereport(DEBUG2,
(errmsg_internal("sending %s to process %d",
(SendStop ? "SIGSTOP" : "SIGQUIT"),
(int) BgWriterPID)));
signal_child(BgWriterPID, (SendStop ? SIGSTOP : SIGQUIT));
}
/* Take care of the checkpointer too */
if (pid == CheckpointerPID)
CheckpointerPID = 0;
else if (CheckpointerPID != 0 && take_action)
{
ereport(DEBUG2,
(errmsg_internal("sending %s to process %d",
(SendStop ? "SIGSTOP" : "SIGQUIT"),
(int) CheckpointerPID)));
signal_child(CheckpointerPID, (SendStop ? SIGSTOP : SIGQUIT));
}
/* Take care of the walwriter too */
if (pid == WalWriterPID)
WalWriterPID = 0;
else if (WalWriterPID != 0 && take_action)
{
ereport(DEBUG2,
(errmsg_internal("sending %s to process %d",
(SendStop ? "SIGSTOP" : "SIGQUIT"),
(int) WalWriterPID)));
signal_child(WalWriterPID, (SendStop ? SIGSTOP : SIGQUIT));
}
/* Take care of the walreceiver too */
if (pid == WalReceiverPID)
WalReceiverPID = 0;
else if (WalReceiverPID != 0 && take_action)
{
ereport(DEBUG2,
(errmsg_internal("sending %s to process %d",
(SendStop ? "SIGSTOP" : "SIGQUIT"),
(int) WalReceiverPID)));
signal_child(WalReceiverPID, (SendStop ? SIGSTOP : SIGQUIT));
}
/* Take care of the autovacuum launcher too */
if (pid == AutoVacPID)
AutoVacPID = 0;
else if (AutoVacPID != 0 && take_action)
{
ereport(DEBUG2,
(errmsg_internal("sending %s to process %d",
(SendStop ? "SIGSTOP" : "SIGQUIT"),
(int) AutoVacPID)));
signal_child(AutoVacPID, (SendStop ? SIGSTOP : SIGQUIT));
}
/*
* Force a power-cycle of the pgarch process too. (This isn't absolutely
* necessary, but it seems like a good idea for robustness, and it
* simplifies the state-machine logic in the case where a shutdown request
* arrives during crash processing.)
*/
if (PgArchPID != 0 && take_action)
{
ereport(DEBUG2,
(errmsg_internal("sending %s to process %d",
"SIGQUIT",
(int) PgArchPID)));
signal_child(PgArchPID, SIGQUIT);
}
/*
* Force a power-cycle of the pgstat process too. (This isn't absolutely
* necessary, but it seems like a good idea for robustness, and it
* simplifies the state-machine logic in the case where a shutdown request
* arrives during crash processing.)
*/
if (PgStatPID != 0 && take_action)
{
ereport(DEBUG2,
(errmsg_internal("sending %s to process %d",
"SIGQUIT",
(int) PgStatPID)));
signal_child(PgStatPID, SIGQUIT);
allow_immediate_pgstat_restart();
}
/* We do NOT restart the syslogger */
if (Shutdown != ImmediateShutdown)
FatalError = true;
/* We now transit into a state of waiting for children to die */
if (pmState == PM_RECOVERY ||
pmState == PM_HOT_STANDBY ||
pmState == PM_RUN ||
pmState == PM_WAIT_BACKUP ||
pmState == PM_WAIT_READONLY ||
pmState == PM_SHUTDOWN)
pmState = PM_WAIT_BACKENDS;
/*
* .. and if this doesn't happen quickly enough, now the clock is ticking
* for us to kill them without mercy.
*/
if (AbortStartTime == 0)
AbortStartTime = time(NULL);
}
/*
* Log the death of a child process.
*/
static void
LogChildExit(int lev, const char *procname, int pid, int exitstatus)
{
/*
* size of activity_buffer is arbitrary, but set equal to default
* track_activity_query_size
*/
char activity_buffer[1024];
const char *activity = NULL;
if (!EXIT_STATUS_0(exitstatus))
activity = pgstat_get_crashed_backend_activity(pid,
activity_buffer,
sizeof(activity_buffer));
if (WIFEXITED(exitstatus))
ereport(lev,
/*------
translator: %s is a noun phrase describing a child process, such as
"server process" */
(errmsg("%s (PID %d) exited with exit code %d",
procname, pid, WEXITSTATUS(exitstatus)),
activity ? errdetail("Failed process was running: %s", activity) : 0));
else if (WIFSIGNALED(exitstatus))
{
#if defined(WIN32)
ereport(lev,
/*------
translator: %s is a noun phrase describing a child process, such as
"server process" */
(errmsg("%s (PID %d) was terminated by exception 0x%X",
procname, pid, WTERMSIG(exitstatus)),
errhint("See C include file \"ntstatus.h\" for a description of the hexadecimal value."),
activity ? errdetail("Failed process was running: %s", activity) : 0));
#else
ereport(lev,
/*------
translator: %s is a noun phrase describing a child process, such as
"server process" */
(errmsg("%s (PID %d) was terminated by signal %d: %s",
procname, pid, WTERMSIG(exitstatus),
pg_strsignal(WTERMSIG(exitstatus))),
activity ? errdetail("Failed process was running: %s", activity) : 0));
#endif
}
else
ereport(lev,
/*------
translator: %s is a noun phrase describing a child process, such as
"server process" */
(errmsg("%s (PID %d) exited with unrecognized status %d",
procname, pid, exitstatus),
activity ? errdetail("Failed process was running: %s", activity) : 0));
}
/*
* Advance the postmaster's state machine and take actions as appropriate
*
* This is common code for pmdie(), reaper() and sigusr1_handler(), which
* receive the signals that might mean we need to change state.
*/
static void
PostmasterStateMachine(void)
{
/*
* This state transition to handle master standby or mirrors receives a
* smart shutdown, no need to wait any additional backends.
*/
if (pmState == PM_STARTUP && StartupPID == 0 && WalReceiverPID == 0)
{
pmState = PM_WAIT_DEAD_END;
}
if (pmState == PM_WAIT_BACKUP)
{
/*
* PM_WAIT_BACKUP state ends when online backup mode is not active.
*/
if (!BackupInProgress())
{
pmState = PM_WAIT_BACKENDS;
}
}
if (pmState == PM_WAIT_READONLY)
{
/*
* PM_WAIT_READONLY state ends when we have no regular backends that
* have been started during recovery. We kill the startup and
* walreceiver processes and transition to PM_WAIT_BACKENDS. Ideally,
* we might like to kill these processes first and then wait for
* backends to die off, but that doesn't work at present because
* killing the startup process doesn't release its locks.
*/
if (CountChildren(BACKEND_TYPE_NORMAL) == 0)
{
if (StartupPID != 0)
signal_child(StartupPID, SIGTERM);
if (WalReceiverPID != 0)
signal_child(WalReceiverPID, SIGTERM);
pmState = PM_WAIT_BACKENDS;
}
}
/*
* If we are in a state-machine state that implies waiting for backends to
* exit, see if they're all gone, and change state if so.
*/
if (pmState == PM_WAIT_BACKENDS)
{
/*
* PM_WAIT_BACKENDS state ends when we have no regular backends
* (including autovac workers), no bgworkers (including unconnected
* ones), and no walwriter, autovac launcher or bgwriter. If we are
* doing crash recovery or an immediate shutdown then we expect the
* checkpointer to exit as well, otherwise not. The archiver, stats,
* and syslogger processes are disregarded since they are not
* connected to shared memory; we also disregard dead_end children
* here. Walsenders are also disregarded, they will be terminated
* later after writing the checkpoint record, like the archiver
* process.
*/
if (CountChildren(BACKEND_TYPE_NORMAL | BACKEND_TYPE_WORKER) == 0 &&
StartupPID == 0 &&
WalReceiverPID == 0 &&
BgWriterPID == 0 &&
(CheckpointerPID == 0 ||
(!FatalError && Shutdown < ImmediateShutdown)) &&
WalWriterPID == 0 &&
AutoVacPID == 0)
{
if (Shutdown >= ImmediateShutdown || FatalError)
{
/*
* Start waiting for dead_end children to die. This state
* change causes ServerLoop to stop creating new ones.
*/
pmState = PM_WAIT_DEAD_END;
/*
* We already SIGQUIT'd the archiver and stats processes, if
* any, when we started immediate shutdown or entered
* FatalError state.
*/
}
else
{
/*
* If we get here, we are proceeding with normal shutdown. All
* the regular children are gone, and it's time to tell the
* checkpointer to do a shutdown checkpoint.
*/
Assert(Shutdown > NoShutdown);
/* Start the checkpointer if not running */
if (CheckpointerPID == 0)
CheckpointerPID = StartCheckpointer();
/* And tell it to shut down */
if (CheckpointerPID != 0)
{
signal_child(CheckpointerPID, SIGUSR2);
pmState = PM_SHUTDOWN;
}
else
{
/*
* If we failed to fork a checkpointer, just shut down.
* Any required cleanup will happen at next restart. We
* set FatalError so that an "abnormal shutdown" message
* gets logged when we exit.
*/
FatalError = true;
pmState = PM_WAIT_DEAD_END;
/* Kill the walsenders, archiver and stats collector too */
SignalChildren(SIGQUIT);
if (PgArchPID != 0)
signal_child(PgArchPID, SIGQUIT);
if (PgStatPID != 0)
signal_child(PgStatPID, SIGQUIT);
}
}
}
}
if (pmState == PM_SHUTDOWN_2)
{
/*
* PM_SHUTDOWN_2 state ends when there's no other children than
* dead_end children left. There shouldn't be any regular backends
* left by now anyway; what we're really waiting for is walsenders and
* archiver.
*/
if (PgArchPID == 0 && CountChildren(BACKEND_TYPE_ALL) == 0)
{
pmState = PM_WAIT_DEAD_END;
}
}
if (pmState == PM_WAIT_DEAD_END)
{
/*
* PM_WAIT_DEAD_END state ends when the BackendList is entirely empty
* (ie, no dead_end children remain), and the archiver and stats
* collector are gone too.
*
* The reason we wait for those two is to protect them against a new
* postmaster starting conflicting subprocesses; this isn't an
* ironclad protection, but it at least helps in the
* shutdown-and-immediately-restart scenario. Note that they have
* already been sent appropriate shutdown signals, either during a
* normal state transition leading up to PM_WAIT_DEAD_END, or during
* FatalError processing.
*/
if (dlist_is_empty(&BackendList) &&
PgArchPID == 0 && PgStatPID == 0)
{
/* These other guys should be dead already */
Assert(StartupPID == 0);
Assert(WalReceiverPID == 0);
Assert(BgWriterPID == 0);
Assert(CheckpointerPID == 0);
Assert(WalWriterPID == 0);
Assert(AutoVacPID == 0);
/* syslogger is not considered here */
pmState = PM_NO_CHILDREN;
}
}
/*
* If we've been told to shut down, we exit as soon as there are no
* remaining children. If there was a crash, cleanup will occur at the
* next startup. (Before PostgreSQL 8.3, we tried to recover from the
* crash before exiting, but that seems unwise if we are quitting because
* we got SIGTERM from init --- there may well not be time for recovery
* before init decides to SIGKILL us.)
*
* Note that the syslogger continues to run. It will exit when it sees
* EOF on its input pipe, which happens when there are no more upstream
* processes.
*/
if (Shutdown > NoShutdown && pmState == PM_NO_CHILDREN)
{
if (FatalError)
{
ereport(LOG, (errmsg("abnormal database system shutdown")));
ExitPostmaster(1);
}
else
{
/*
* Terminate exclusive backup mode to avoid recovery after a clean
* fast shutdown. Since an exclusive backup can only be taken
* during normal running (and not, for example, while running
* under Hot Standby) it only makes sense to do this if we reached
* normal running. If we're still in recovery, the backup file is
* one we're recovering *from*, and we must keep it around so that
* recovery restarts from the right place.
*/
if (ReachedNormalRunning)
CancelBackup();
/* Normal exit from the postmaster is here */
ExitPostmaster(0);
}
}
/*
* If the startup process failed, or the user does not want an automatic
* restart after backend crashes, wait for all non-syslogger children to
* exit, and then exit postmaster. We don't try to reinitialize when the
* startup process fails, because more than likely it will just fail again
* and we will keep trying forever.
*/
if (pmState == PM_NO_CHILDREN &&
(StartupStatus == STARTUP_CRASHED || !restart_after_crash))
ExitPostmaster(1);
/*
* If we need to recover from a crash, wait for all non-syslogger children
* to exit, then reset shmem and StartupDataBase.
*/
if (FatalError && pmState == PM_NO_CHILDREN)
{
ereport(LOG,
(errmsg("all server processes terminated; reinitializing")));
/* CDB: reload all auxiliary workers like FTS and DTX recover or GDD */
load_auxiliary_libraries();
/* allow background workers to immediately restart */
ResetBackgroundWorkerCrashTimes();
shmem_exit(1);
/* re-read control file into local memory */
LocalProcessControlFile(true);
reset_shared(PostPortNumber);
StartupPID = StartupDataBase();
Assert(StartupPID != 0);
StartupStatus = STARTUP_RUNNING;
pmState = PM_STARTUP;
/* crash recovery started, reset SIGKILL flag */
AbortStartTime = 0;
}
}
/*
* Send a signal to a postmaster child process
*
* On systems that have setsid(), each child process sets itself up as a
* process group leader. For signals that are generally interpreted in the
* appropriate fashion, we signal the entire process group not just the
* direct child process. This allows us to, for example, SIGQUIT a blocked
* archive_recovery script, or SIGINT a script being run by a backend via
* system().
*
* There is a race condition for recently-forked children: they might not
* have executed setsid() yet. So we signal the child directly as well as
* the group. We assume such a child will handle the signal before trying
* to spawn any grandchild processes. We also assume that signaling the
* child twice will not cause any problems.
*/
static void
signal_child(pid_t pid, int signal)
{
if (kill(pid, signal) < 0)
elog(DEBUG3, "kill(%ld,%d) failed: %m", (long) pid, signal);
#ifdef HAVE_SETSID
switch (signal)
{
case SIGINT:
case SIGTERM:
case SIGQUIT:
case SIGSTOP:
case SIGKILL:
if (kill(-pid, signal) < 0)
elog(DEBUG3, "kill(%ld,%d) failed: %m", (long) (-pid), signal);
break;
default:
break;
}
#endif
}
/*
* Send a signal to the targeted children (but NOT special children;
* dead_end children are never signaled, either).
*/
static bool
SignalSomeChildren(int signal, int target)
{
dlist_iter iter;
bool signaled = false;
dlist_foreach(iter, &BackendList)
{
Backend *bp = dlist_container(Backend, elem, iter.cur);
if (bp->dead_end)
continue;
/*
* Since target == BACKEND_TYPE_ALL is the most common case, we test
* it first and avoid touching shared memory for every child.
*/
if (target != BACKEND_TYPE_ALL)
{
/*
* Assign bkend_type for any recently announced WAL Sender
* processes.
*/
if (bp->bkend_type == BACKEND_TYPE_NORMAL &&
IsPostmasterChildWalSender(bp->child_slot))
bp->bkend_type = BACKEND_TYPE_WALSND;
if (!(target & bp->bkend_type))
continue;
}
ereport(DEBUG4,
(errmsg_internal("sending signal %d to process %d",
signal, (int) bp->pid)));
signal_child(bp->pid, signal);
signaled = true;
}
return signaled;
}
/*
* Send a termination signal to children. This considers all of our children
* processes, except syslogger and dead_end backends.
*/
static void
TerminateChildren(int signal)
{
SignalChildren(signal);
if (StartupPID != 0)
{
signal_child(StartupPID, signal);
if (signal == SIGQUIT || signal == SIGKILL)
StartupStatus = STARTUP_SIGNALED;
}
if (BgWriterPID != 0)
signal_child(BgWriterPID, signal);
if (CheckpointerPID != 0)
signal_child(CheckpointerPID, signal);
if (WalWriterPID != 0)
signal_child(WalWriterPID, signal);
if (WalReceiverPID != 0)
signal_child(WalReceiverPID, signal);
if (AutoVacPID != 0)
signal_child(AutoVacPID, signal);
if (PgArchPID != 0)
signal_child(PgArchPID, signal);
if (PgStatPID != 0)
signal_child(PgStatPID, signal);
}
/*
* BackendStartup -- start backend process
*
* returns: STATUS_ERROR if the fork failed, STATUS_OK otherwise.
*
* Note: if you change this code, also consider StartAutovacuumWorker.
*/
static int
BackendStartup(Port *port)
{
Backend *bn; /* for backend cleanup */
pid_t pid;
/*
* Create backend data structure. Better before the fork() so we can
* handle failure cleanly.
*/
bn = (Backend *) malloc(sizeof(Backend));
if (!bn)
{
ereport(LOG,
(errcode(ERRCODE_OUT_OF_MEMORY),
errmsg("out of memory")));
return STATUS_ERROR;
}
/*
* Compute the cancel key that will be assigned to this backend. The
* backend will have its own copy in the forked-off process' value of
* MyCancelKey, so that it can transmit the key to the frontend.
*/
if (!RandomCancelKey(&MyCancelKey))
{
free(bn);
ereport(LOG,
(errcode(ERRCODE_INTERNAL_ERROR),
errmsg("could not generate random cancel key")));
return STATUS_ERROR;
}
bn->cancel_key = MyCancelKey;
/* Pass down canAcceptConnections state */
port->canAcceptConnections = canAcceptConnections();
bn->dead_end = (port->canAcceptConnections != CAC_OK &&
port->canAcceptConnections != CAC_WAITBACKUP &&
port->canAcceptConnections != CAC_MIRROR_READY);
/*
* Unless it's a dead_end child, assign it a child slot number
*/
if (!bn->dead_end)
bn->child_slot = MyPMChildSlot = AssignPostmasterChildSlot();
else
bn->child_slot = 0;
/* Hasn't asked to be notified about any bgworkers yet */
bn->bgworker_notify = false;
#ifdef EXEC_BACKEND
pid = backend_forkexec(port);
#else /* !EXEC_BACKEND */
pid = fork_process();
if (pid == 0) /* child */
{
free(bn);
/* Detangle from postmaster */
InitPostmasterChild();
/* Close the postmaster's sockets */
ClosePostmasterPorts(false);
/* Perform additional initialization and collect startup packet */
BackendInitialize(port);
/* And run the backend */
BackendRun(port);
}
#endif /* EXEC_BACKEND */
if (pid < 0)
{
/* in parent, fork failed */
int save_errno = errno;
if (!bn->dead_end)
(void) ReleasePostmasterChildSlot(bn->child_slot);
free(bn);
errno = save_errno;
ereport(LOG,
(errmsg("could not fork new process for connection: %m")));
report_fork_failure_to_client(port, save_errno);
return STATUS_ERROR;
}
/* in parent, successful fork */
ereport(DEBUG2,
(errmsg_internal("forked new backend, pid=%d socket=%d",
(int) pid, (int) port->sock)));
/*
* Everything's been successful, it's safe to add this backend to our list
* of backends.
*/
bn->pid = pid;
bn->bkend_type = BACKEND_TYPE_NORMAL; /* Can change later to WALSND */
dlist_push_head(&BackendList, &bn->elem);
#ifdef EXEC_BACKEND
if (!bn->dead_end)
ShmemBackendArrayAdd(bn);
#endif
return STATUS_OK;
}
/*
* Try to report backend fork() failure to client before we close the
* connection. Since we do not care to risk blocking the postmaster on
* this connection, we set the connection to non-blocking and try only once.
*
* This is grungy special-purpose code; we cannot use backend libpq since
* it's not up and running.
*/
static void
report_fork_failure_to_client(Port *port, int errnum)
{
char buffer[1000];
int rc;
/* Format the error message packet (always V2 protocol) */
snprintf(buffer, sizeof(buffer), "E%s%s\n",
_("could not fork new process for connection: "),
strerror(errnum));
/* Set port to non-blocking. Don't do send() if this fails */
if (!pg_set_noblock(port->sock))
return;
/* We'll retry after EINTR, but ignore all other failures */
do
{
rc = send(port->sock, buffer, strlen(buffer) + 1, 0);
} while (rc < 0 && errno == EINTR);
}
/*
* BackendInitialize -- initialize an interactive (postmaster-child)
* backend process, and collect the client's startup packet.
*
* returns: nothing. Will not return at all if there's any failure.
*
* Note: this code does not depend on having any access to shared memory.
* In the EXEC_BACKEND case, we are physically attached to shared memory
* but have not yet set up most of our local pointers to shmem structures.
*/
static void
BackendInitialize(Port *port)
{
int status;
int ret;
char remote_host[NI_MAXHOST];
char remote_port[NI_MAXSERV];
char remote_ps_data[NI_MAXHOST];
/* Save port etc. for ps status */
MyProcPort = port;
/*
* PreAuthDelay is a debugging aid for investigating problems in the
* authentication cycle: it can be set in postgresql.conf to allow time to
* attach to the newly-forked backend with a debugger. (See also
* PostAuthDelay, which we allow clients to pass through PGOPTIONS, but it
* is not honored until after authentication.)
*/
if (PreAuthDelay > 0)
pg_usleep(PreAuthDelay * 1000000L);
/* This flag will remain set until InitPostgres finishes authentication */
ClientAuthInProgress = true; /* limit visibility of log messages */
/* set these to empty in case they are needed before we set them up */
port->remote_host = "";
port->remote_port = "";
/*
* Initialize libpq and enable reporting of ereport errors to the client.
* Must do this now because authentication uses libpq to send messages.
*/
pq_init(); /* initialize libpq to talk to client */
whereToSendOutput = DestRemote; /* now safe to ereport to client */
/*
* We arrange for a simple exit(1) if we receive SIGTERM or SIGQUIT or
* timeout while trying to collect the startup packet. Otherwise the
* postmaster cannot shutdown the database FAST or IMMED cleanly if a
* buggy client fails to send the packet promptly. XXX it follows that
* the remainder of this function must tolerate losing control at any
* instant. Likewise, any pg_on_exit_callback registered before or during
* this function must be prepared to execute at any instant between here
* and the end of this function. Furthermore, affected callbacks execute
* partially or not at all when a second exit-inducing signal arrives
* after proc_exit_prepare() decrements on_proc_exit_index. (Thanks to
* that mechanic, callbacks need not anticipate more than one call.) This
* is fragile; it ought to instead follow the norm of handling interrupts
* at selected, safe opportunities.
*/
pqsignal(SIGTERM, startup_die);
pqsignal(SIGQUIT, startup_die);
InitializeTimeouts(); /* establishes SIGALRM handler */
PG_SETMASK(&StartupBlockSig);
/*
* Get the remote host name and port for logging and status display.
*/
remote_host[0] = '\0';
remote_port[0] = '\0';
if ((ret = pg_getnameinfo_all(&port->raddr.addr, port->raddr.salen,
remote_host, sizeof(remote_host),
remote_port, sizeof(remote_port),
(log_hostname ? 0 : NI_NUMERICHOST) | NI_NUMERICSERV)) != 0)
ereport(WARNING,
(errmsg_internal("pg_getnameinfo_all() failed: %s",
gai_strerror(ret))));
if (remote_port[0] == '\0')
snprintf(remote_ps_data, sizeof(remote_ps_data), "%s", remote_host);
else
snprintf(remote_ps_data, sizeof(remote_ps_data), "%s(%s)", remote_host, remote_port);
/*
* Save remote_host and remote_port in port structure (after this, they
* will appear in log_line_prefix data for log messages).
*/
port->remote_host = strdup(remote_host);
port->remote_port = strdup(remote_port);
/* And now we can issue the Log_connections message, if wanted */
if (Log_connections)
{
if (remote_port[0])
ereport(LOG,
(errmsg("connection received: host=%s port=%s",
remote_host,
remote_port)));
else
ereport(LOG,
(errmsg("connection received: host=%s",
remote_host)));
}
/*
* If we did a reverse lookup to name, we might as well save the results
* rather than possibly repeating the lookup during authentication.
*
* Note that we don't want to specify NI_NAMEREQD above, because then we'd
* get nothing useful for a client without an rDNS entry. Therefore, we
* must check whether we got a numeric IPv4 or IPv6 address, and not save
* it into remote_hostname if so. (This test is conservative and might
* sometimes classify a hostname as numeric, but an error in that
* direction is safe; it only results in a possible extra lookup.)
*/
if (log_hostname &&
ret == 0 &&
strspn(remote_host, "0123456789.") < strlen(remote_host) &&
strspn(remote_host, "0123456789ABCDEFabcdef:") < strlen(remote_host))
port->remote_hostname = strdup(remote_host);
/*
* Ready to begin client interaction. We will give up and exit(1) after a
* time delay, so that a broken client can't hog a connection
* indefinitely. PreAuthDelay and any DNS interactions above don't count
* against the time limit.
*
* Note: AuthenticationTimeout is applied here while waiting for the
* startup packet, and then again in InitPostgres for the duration of any
* authentication operations. So a hostile client could tie up the
* process for nearly twice AuthenticationTimeout before we kick him off.
*
* Note: because PostgresMain will call InitializeTimeouts again, the
* registration of STARTUP_PACKET_TIMEOUT will be lost. This is okay
* since we never use it again after this function.
*/
RegisterTimeout(STARTUP_PACKET_TIMEOUT, StartupPacketTimeoutHandler);
enable_timeout_after(STARTUP_PACKET_TIMEOUT, AuthenticationTimeout * 1000);
/*
* Receive the startup packet (which might turn out to be a cancel request
* packet).
*/
status = ProcessStartupPacket(port, false);
/*
* Stop here if it was bad or a cancel packet. ProcessStartupPacket
* already did any appropriate error reporting.
*/
if (status != STATUS_OK)
proc_exit(0);
/*
* Now that we have the user and database name, we can set the process
* title for ps. It's good to do this as early as possible in startup.
*
* For a walsender, the ps display is set in the following form:
*
* postgres: walsender <user> <host> <activity>
*
* To achieve that, we pass "walsender" as username and username as dbname
* to init_ps_display(). XXX: should add a new variant of
* init_ps_display() to avoid abusing the parameters like this.
*/
if (am_walsender)
init_ps_display(pgstat_get_backend_desc(B_WAL_SENDER), port->user_name, remote_ps_data,
update_process_title ? "authentication" : "");
else if (am_ftshandler)
init_ps_display("fts handler process", port->user_name, remote_ps_data,
update_process_title ? "authentication" : "");
else if (am_faulthandler)
init_ps_display("fault handler process", port->user_name, remote_ps_data,
update_process_title ? "authentication" : "");
else
init_ps_display(port->user_name, port->database_name, remote_ps_data,
update_process_title ? "authentication" : "");
/*
* Disable the timeout, and prevent SIGTERM/SIGQUIT again.
*/
disable_timeout(STARTUP_PACKET_TIMEOUT, false);
PG_SETMASK(&BlockSig);
}
/*
* BackendRun -- set up the backend's argument list and invoke PostgresMain()
*
* returns:
* Shouldn't return at all.
* If PostgresMain() fails, return status.
*/
static void
BackendRun(Port *port)
{
char **av;
int maxac;
int ac;
int i;
/*
* Now, build the argv vector that will be given to PostgresMain.
*
* The maximum possible number of commandline arguments that could come
* from ExtraOptions is (strlen(ExtraOptions) + 1) / 2; see
* pg_split_opts().
*/
maxac = 2; /* for fixed args supplied below */
maxac += (strlen(ExtraOptions) + 1) / 2;
av = (char **) MemoryContextAlloc(TopMemoryContext,
maxac * sizeof(char *));
ac = 0;
av[ac++] = "postgres";
/*
* Pass any backend switches specified with -o on the postmaster's own
* command line. We assume these are secure.
*/
pg_split_opts(av, &ac, ExtraOptions);
av[ac] = NULL;
Assert(ac < maxac);
/*
* Debug: print arguments being passed to backend
*/
ereport(DEBUG3,
(errmsg_internal("%s child[%d]: starting with (",
progname, (int) getpid())));
for (i = 0; i < ac; ++i)
ereport(DEBUG3,
(errmsg_internal("\t%s", av[i])));
ereport(DEBUG3,
(errmsg_internal(")")));
/*
* Make sure we aren't in PostmasterContext anymore. (We can't delete it
* just yet, though, because InitPostgres will need the HBA data.)
*/
MemoryContextSwitchTo(TopMemoryContext);
PostgresMain(ac, av, port->database_name, port->user_name);
}
#ifdef EXEC_BACKEND
/*
* postmaster_forkexec -- fork and exec a postmaster subprocess
*
* The caller must have set up the argv array already, except for argv[2]
* which will be filled with the name of the temp variable file.
*
* Returns the child process PID, or -1 on fork failure (a suitable error
* message has been logged on failure).
*
* All uses of this routine will dispatch to SubPostmasterMain in the
* child process.
*/
pid_t
postmaster_forkexec(int argc, char *argv[])
{
Port port;
/* This entry point passes dummy values for the Port variables */
memset(&port, 0, sizeof(port));
return internal_forkexec(argc, argv, &port);
}
/*
* backend_forkexec -- fork/exec off a backend process
*
* Some operating systems (WIN32) don't have fork() so we have to simulate
* it by storing parameters that need to be passed to the child and
* then create a new child process.
*
* returns the pid of the fork/exec'd process, or -1 on failure
*/
static pid_t
backend_forkexec(Port *port)
{
char *av[4];
int ac = 0;
av[ac++] = "postgres";
av[ac++] = "--forkbackend";
av[ac++] = NULL; /* filled in by internal_forkexec */
av[ac] = NULL;
Assert(ac < lengthof(av));
return internal_forkexec(ac, av, port);
}
#ifndef WIN32
/*
* internal_forkexec non-win32 implementation
*
* - writes out backend variables to the parameter file
* - fork():s, and then exec():s the child process
*/
static pid_t
internal_forkexec(int argc, char *argv[], Port *port)
{
static unsigned long tmpBackendFileNum = 0;
pid_t pid;
char tmpfilename[MAXPGPATH];
BackendParameters param;
FILE *fp;
if (!save_backend_variables(¶m, port))
return -1; /* log made by save_backend_variables */
/* Calculate name for temp file */
snprintf(tmpfilename, MAXPGPATH, "%s/%s.backend_var.%d.%lu",
PG_TEMP_FILES_DIR, PG_TEMP_FILE_PREFIX,
MyProcPid, ++tmpBackendFileNum);
/* Open file */
fp = AllocateFile(tmpfilename, PG_BINARY_W);
if (!fp)
{
/*
* As in OpenTemporaryFileInTablespace, try to make the temp-file
* directory, ignoring errors.
*/
(void) MakePGDirectory(PG_TEMP_FILES_DIR);
fp = AllocateFile(tmpfilename, PG_BINARY_W);
if (!fp)
{
ereport(LOG,
(errcode_for_file_access(),
errmsg("could not create file \"%s\": %m",
tmpfilename)));
return -1;
}
}
if (fwrite(¶m, sizeof(param), 1, fp) != 1)
{
ereport(LOG,
(errcode_for_file_access(),
errmsg("could not write to file \"%s\": %m", tmpfilename)));
FreeFile(fp);
return -1;
}
/* Release file */
if (FreeFile(fp))
{
ereport(LOG,
(errcode_for_file_access(),
errmsg("could not write to file \"%s\": %m", tmpfilename)));
return -1;
}
/* Make sure caller set up argv properly */
Assert(argc >= 3);
Assert(argv[argc] == NULL);
Assert(strncmp(argv[1], "--fork", 6) == 0);
Assert(argv[2] == NULL);
/* Insert temp file name after --fork argument */
argv[2] = tmpfilename;
/* Fire off execv in child */
if ((pid = fork_process()) == 0)
{
if (execv(postgres_exec_path, argv) < 0)
{
ereport(LOG,
(errmsg("could not execute server process \"%s\": %m",
postgres_exec_path)));
/* We're already in the child process here, can't return */
exit(1);
}
}
return pid; /* Parent returns pid, or -1 on fork failure */
}
#else /* WIN32 */
/*
* internal_forkexec win32 implementation
*
* - starts backend using CreateProcess(), in suspended state
* - writes out backend variables to the parameter file
* - during this, duplicates handles and sockets required for
* inheritance into the new process
* - resumes execution of the new process once the backend parameter
* file is complete.
*/
static pid_t
internal_forkexec(int argc, char *argv[], Port *port)
{
int retry_count = 0;
STARTUPINFO si;
PROCESS_INFORMATION pi;
int i;
int j;
char cmdLine[MAXPGPATH * 2];
HANDLE paramHandle;
BackendParameters *param;
SECURITY_ATTRIBUTES sa;
char paramHandleStr[32];
win32_deadchild_waitinfo *childinfo;
/* Make sure caller set up argv properly */
Assert(argc >= 3);
Assert(argv[argc] == NULL);
Assert(strncmp(argv[1], "--fork", 6) == 0);
Assert(argv[2] == NULL);
/* Resume here if we need to retry */
retry:
/* Set up shared memory for parameter passing */
ZeroMemory(&sa, sizeof(sa));
sa.nLength = sizeof(sa);
sa.bInheritHandle = TRUE;
paramHandle = CreateFileMapping(INVALID_HANDLE_VALUE,
&sa,
PAGE_READWRITE,
0,
sizeof(BackendParameters),
NULL);
if (paramHandle == INVALID_HANDLE_VALUE)
{
elog(LOG, "could not create backend parameter file mapping: error code %lu",
GetLastError());
return -1;
}
param = MapViewOfFile(paramHandle, FILE_MAP_WRITE, 0, 0, sizeof(BackendParameters));
if (!param)
{
elog(LOG, "could not map backend parameter memory: error code %lu",
GetLastError());
CloseHandle(paramHandle);
return -1;
}
/* Insert temp file name after --fork argument */
#ifdef _WIN64
sprintf(paramHandleStr, "%llu", (LONG_PTR) paramHandle);
#else
sprintf(paramHandleStr, "%lu", (DWORD) paramHandle);
#endif
argv[2] = paramHandleStr;
/* Format the cmd line */
cmdLine[sizeof(cmdLine) - 1] = '\0';
cmdLine[sizeof(cmdLine) - 2] = '\0';
snprintf(cmdLine, sizeof(cmdLine) - 1, "\"%s\"", postgres_exec_path);
i = 0;
while (argv[++i] != NULL)
{
j = strlen(cmdLine);
snprintf(cmdLine + j, sizeof(cmdLine) - 1 - j, " \"%s\"", argv[i]);
}
if (cmdLine[sizeof(cmdLine) - 2] != '\0')
{
elog(LOG, "subprocess command line too long");
return -1;
}
memset(&pi, 0, sizeof(pi));
memset(&si, 0, sizeof(si));
si.cb = sizeof(si);
/*
* Create the subprocess in a suspended state. This will be resumed later,
* once we have written out the parameter file.
*/
if (!CreateProcess(NULL, cmdLine, NULL, NULL, TRUE, CREATE_SUSPENDED,
NULL, NULL, &si, &pi))
{
elog(LOG, "CreateProcess call failed: %m (error code %lu)",
GetLastError());
return -1;
}
if (!save_backend_variables(param, port, pi.hProcess, pi.dwProcessId))
{
/*
* log made by save_backend_variables, but we have to clean up the
* mess with the half-started process
*/
if (!TerminateProcess(pi.hProcess, 255))
ereport(LOG,
(errmsg_internal("could not terminate unstarted process: error code %lu",
GetLastError())));
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
return -1; /* log made by save_backend_variables */
}
/* Drop the parameter shared memory that is now inherited to the backend */
if (!UnmapViewOfFile(param))
elog(LOG, "could not unmap view of backend parameter file: error code %lu",
GetLastError());
if (!CloseHandle(paramHandle))
elog(LOG, "could not close handle to backend parameter file: error code %lu",
GetLastError());
/*
* Reserve the memory region used by our main shared memory segment before
* we resume the child process. Normally this should succeed, but if ASLR
* is active then it might sometimes fail due to the stack or heap having
* gotten mapped into that range. In that case, just terminate the
* process and retry.
*/
if (!pgwin32_ReserveSharedMemoryRegion(pi.hProcess))
{
/* pgwin32_ReserveSharedMemoryRegion already made a log entry */
if (!TerminateProcess(pi.hProcess, 255))
ereport(LOG,
(errmsg_internal("could not terminate process that failed to reserve memory: error code %lu",
GetLastError())));
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
if (++retry_count < 100)
goto retry;
ereport(LOG,
(errmsg("giving up after too many tries to reserve shared memory"),
errhint("This might be caused by ASLR or antivirus software.")));
return -1;
}
/*
* Now that the backend variables are written out, we start the child
* thread so it can start initializing while we set up the rest of the
* parent state.
*/
if (ResumeThread(pi.hThread) == -1)
{
if (!TerminateProcess(pi.hProcess, 255))
{
ereport(LOG,
(errmsg_internal("could not terminate unstartable process: error code %lu",
GetLastError())));
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
return -1;
}
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
ereport(LOG,
(errmsg_internal("could not resume thread of unstarted process: error code %lu",
GetLastError())));
return -1;
}
/*
* Queue a waiter to signal when this child dies. The wait will be handled
* automatically by an operating system thread pool.
*
* Note: use malloc instead of palloc, since it needs to be thread-safe.
* Struct will be free():d from the callback function that runs on a
* different thread.
*/
childinfo = malloc(sizeof(win32_deadchild_waitinfo));
if (!childinfo)
ereport(FATAL,
(errcode(ERRCODE_OUT_OF_MEMORY),
errmsg("out of memory")));
childinfo->procHandle = pi.hProcess;
childinfo->procId = pi.dwProcessId;
if (!RegisterWaitForSingleObject(&childinfo->waitHandle,
pi.hProcess,
pgwin32_deadchild_callback,
childinfo,
INFINITE,
WT_EXECUTEONLYONCE | WT_EXECUTEINWAITTHREAD))
ereport(FATAL,
(errmsg_internal("could not register process for wait: error code %lu",
GetLastError())));
/* Don't close pi.hProcess here - the wait thread needs access to it */
CloseHandle(pi.hThread);
return pi.dwProcessId;
}
#endif /* WIN32 */
/*
* SubPostmasterMain -- Get the fork/exec'd process into a state equivalent
* to what it would be if we'd simply forked on Unix, and then
* dispatch to the appropriate place.
*
* The first two command line arguments are expected to be "--forkFOO"
* (where FOO indicates which postmaster child we are to become), and
* the name of a variables file that we can read to load data that would
* have been inherited by fork() on Unix. Remaining arguments go to the
* subprocess FooMain() routine.
*/
void
SubPostmasterMain(int argc, char *argv[])
{
Port port;
/* In EXEC_BACKEND case we will not have inherited these settings */
IsPostmasterEnvironment = true;
whereToSendOutput = DestNone;
/* Setup as postmaster child */
InitPostmasterChild();
/* Setup essential subsystems (to ensure elog() behaves sanely) */
InitializeGUCOptions();
/* Check we got appropriate args */
if (argc < 3)
elog(FATAL, "invalid subpostmaster invocation");
/* Read in the variables file */
memset(&port, 0, sizeof(Port));
read_backend_variables(argv[2], &port);
/* Close the postmaster's sockets (as soon as we know them) */
ClosePostmasterPorts(strcmp(argv[1], "--forklog") == 0);
/*
* Set reference point for stack-depth checking
*/
set_stack_base();
/*
* Set up memory area for GSS information. Mirrors the code in ConnCreate
* for the non-exec case.
*/
#if defined(ENABLE_GSS) || defined(ENABLE_SSPI)
port.gss = (pg_gssinfo *) calloc(1, sizeof(pg_gssinfo));
if (!port.gss)
ereport(FATAL,
(errcode(ERRCODE_OUT_OF_MEMORY),
errmsg("out of memory")));
#endif
/*
* If appropriate, physically re-attach to shared memory segment. We want
* to do this before going any further to ensure that we can attach at the
* same address the postmaster used. On the other hand, if we choose not
* to re-attach, we may have other cleanup to do.
*
* If testing EXEC_BACKEND on Linux, you should run this as root before
* starting the postmaster:
*
* echo 0 >/proc/sys/kernel/randomize_va_space
*
* This prevents using randomized stack and code addresses that cause the
* child process's memory map to be different from the parent's, making it
* sometimes impossible to attach to shared memory at the desired address.
* Return the setting to its old value (usually '1' or '2') when finished.
*/
if (strcmp(argv[1], "--forkbackend") == 0 ||
strcmp(argv[1], "--forkavlauncher") == 0 ||
strcmp(argv[1], "--forkavworker") == 0 ||
strcmp(argv[1], "--forkautovac") == 0 ||
strcmp(argv[1], "--forkglobaldeadlockdetector") == 0 ||
strcmp(argv[1], "--forkboot") == 0 ||
strncmp(argv[1], "--forkbgworker=", 15) == 0)
PGSharedMemoryReAttach();
else
PGSharedMemoryNoReAttach();
/* autovacuum needs this set before calling InitProcess */
if (strcmp(argv[1], "--forkavlauncher") == 0)
AutovacuumLauncherIAm();
if (strcmp(argv[1], "--forkavworker") == 0)
AutovacuumWorkerIAm();
/*
* Start our win32 signal implementation. This has to be done after we
* read the backend variables, because we need to pick up the signal pipe
* from the parent process.
*/
#ifdef WIN32
pgwin32_signal_initialize();
#endif
/* In EXEC_BACKEND case we will not have inherited these settings */
pqinitmask();
PG_SETMASK(&BlockSig);
/* Read in remaining GUC variables */
read_nondefault_variables();
/*
* CDB: gpdb auxilary process like fts probe, dtx recovery process is
* essential, we need to load them ahead of custom shared preload libraries
* to avoid exceeding max_worker_processes.
*/
load_auxiliary_libraries();
/*
* Check that the data directory looks valid, which will also check the
* privileges on the data directory and update our umask and file/group
* variables for creating files later. Note: this should really be done
* before we create any files or directories.
*/
checkDataDir();
/*
* (re-)read control file, as it contains config. The postmaster will
* already have read this, but this process doesn't know about that.
*/
LocalProcessControlFile(false);
/*
* Reload any libraries that were preloaded by the postmaster. Since we
* exec'd this process, those libraries didn't come along with us; but we
* should load them into all child processes to be consistent with the
* non-EXEC_BACKEND behavior.
*/
process_shared_preload_libraries();
/* Run backend or appropriate child */
if (strcmp(argv[1], "--forkbackend") == 0)
{
Assert(argc == 3); /* shouldn't be any more args */
/*
* Need to reinitialize the SSL library in the backend, since the
* context structures contain function pointers and cannot be passed
* through the parameter file.
*
* If for some reason reload fails (maybe the user installed broken
* key files), soldier on without SSL; that's better than all
* connections becoming impossible.
*
* XXX should we do this in all child processes? For the moment it's
* enough to do it in backend children.
*/
#ifdef USE_SSL
if (EnableSSL)
{
if (secure_initialize(false) == 0)
LoadedSSL = true;
else
ereport(LOG,
(errmsg("SSL configuration could not be loaded in child process")));
}
#endif
/*
* Perform additional initialization and collect startup packet.
*
* We want to do this before InitProcess() for a couple of reasons: 1.
* so that we aren't eating up a PGPROC slot while waiting on the
* client. 2. so that if InitProcess() fails due to being out of
* PGPROC slots, we have already initialized libpq and are able to
* report the error to the client.
*/
BackendInitialize(&port);
/* Restore basic shared memory pointers */
InitShmemAccess(UsedShmemSegAddr);
/* Need a PGPROC to run CreateSharedMemoryAndSemaphores */
InitProcess();
/* Attach process to shared data structures */
CreateSharedMemoryAndSemaphores(0);
/* And run the backend */
BackendRun(&port); /* does not return */
}
if (strcmp(argv[1], "--forkboot") == 0)
{
/* Restore basic shared memory pointers */
InitShmemAccess(UsedShmemSegAddr);
/* Need a PGPROC to run CreateSharedMemoryAndSemaphores */
InitAuxiliaryProcess();
/* Attach process to shared data structures */
CreateSharedMemoryAndSemaphores(0);
AuxiliaryProcessMain(argc - 2, argv + 2); /* does not return */
}
if (strcmp(argv[1], "--forkavlauncher") == 0)
{
/* Restore basic shared memory pointers */
InitShmemAccess(UsedShmemSegAddr);
/* Need a PGPROC to run CreateSharedMemoryAndSemaphores */
InitProcess();
/* Attach process to shared data structures */
CreateSharedMemoryAndSemaphores(0);
AutoVacLauncherMain(argc - 2, argv + 2); /* does not return */
}
if (strcmp(argv[1], "--forkavworker") == 0)
{
/* Restore basic shared memory pointers */
InitShmemAccess(UsedShmemSegAddr);
/* Need a PGPROC to run CreateSharedMemoryAndSemaphores */
InitProcess();
/* Attach process to shared data structures */
CreateSharedMemoryAndSemaphores(0);
AutoVacWorkerMain(argc - 2, argv + 2); /* does not return */
}
if (strncmp(argv[1], "--forkbgworker=", 15) == 0)
{
int shmem_slot;
/* do this as early as possible; in particular, before InitProcess() */
IsBackgroundWorker = true;
/* Restore basic shared memory pointers */
InitShmemAccess(UsedShmemSegAddr);
/* Need a PGPROC to run CreateSharedMemoryAndSemaphores */
InitProcess();
/* Attach process to shared data structures */
CreateSharedMemoryAndSemaphores(0);
/* Fetch MyBgworkerEntry from shared memory */
shmem_slot = atoi(argv[1] + 15);
MyBgworkerEntry = BackgroundWorkerEntry(shmem_slot);
StartBackgroundWorker();
}
if (strcmp(argv[1], "--forkarch") == 0)
{
/* Do not want to attach to shared memory */
PgArchiverMain(argc, argv); /* does not return */
}
if (strcmp(argv[1], "--forkcol") == 0)
{
/* Do not want to attach to shared memory */
PgstatCollectorMain(argc, argv); /* does not return */
}
if (strcmp(argv[1], "--forklog") == 0)
{
/* Do not want to attach to shared memory */
SysLoggerMain(argc, argv); /* does not return */
}
abort(); /* shouldn't get here */
}
#endif /* EXEC_BACKEND */
/*
* ExitPostmaster -- cleanup
*
* Do NOT call exit() directly --- always go through here!
*/
static void
ExitPostmaster(int status)
{
#ifdef HAVE_PTHREAD_IS_THREADED_NP
/*
* There is no known cause for a postmaster to become multithreaded after
* startup. Recheck to account for the possibility of unknown causes.
* This message uses LOG level, because an unclean shutdown at this point
* would usually not look much different from a clean shutdown.
*/
if (pthread_is_threaded_np() != 0)
ereport(LOG,
(errcode(ERRCODE_INTERNAL_ERROR),
errmsg_internal("postmaster became multithreaded"),
errdetail("Please report this to <pgsql-bugs@lists.postgresql.org>.")));
#endif
/* should cleanup shared memory and kill all backends */
/*
* Not sure of the semantics here. When the Postmaster dies, should the
* backends all be killed? probably not.
*
* MUST -- vadim 05-10-1999
*/
proc_exit(status);
}
/*
* sigusr1_handler - handle signal conditions from child processes
*/
static void
sigusr1_handler(SIGNAL_ARGS)
{
int save_errno = errno;
PG_SETMASK(&BlockSig);
/* Process background worker state change. */
if (CheckPostmasterSignal(PMSIGNAL_BACKGROUND_WORKER_CHANGE))
{
BackgroundWorkerStateChange();
StartWorkerNeeded = true;
}
/*
* RECOVERY_STARTED and BEGIN_HOT_STANDBY signals are ignored in
* unexpected states. If the startup process quickly starts up, completes
* recovery, exits, we might process the death of the startup process
* first. We don't want to go back to recovery in that case.
*/
if (CheckPostmasterSignal(PMSIGNAL_RECOVERY_STARTED) &&
pmState == PM_STARTUP && Shutdown == NoShutdown)
{
/* WAL redo has started. We're out of reinitialization. */
bool promotion_requested = false;
FatalError = false;
Assert(AbortStartTime == 0);
/*
* Crank up the background tasks. It doesn't matter if this fails,
* we'll just try again later.
*/
Assert(CheckpointerPID == 0);
CheckpointerPID = StartCheckpointer();
Assert(BgWriterPID == 0);
BgWriterPID = StartBackgroundWriter();
/*
* Start the archiver if we're responsible for (re-)archiving received
* files.
*/
Assert(PgArchPID == 0);
if (XLogArchivingAlways())
PgArchPID = pgarch_start();
/*
* GPDB: if promote trigger file exist we don't wish to convey
* PM_STATUS_STANDBY, instead wish pg_ctl -w to wait till
* connections can be actually accepted by the database.
*/
if (PromoteTriggerFile != NULL && strcmp(PromoteTriggerFile, "") != 0)
{
struct stat stat_buf;
if (stat(PromoteTriggerFile, &stat_buf) == 0)
promotion_requested = true;
}
/*
* GPDB: Setting recovery_target_action
* configuration parameter to 'promote' will also result
* into promotion after recovery is completed.
*/
if (recoveryTargetAction == RECOVERY_TARGET_ACTION_PROMOTE)
promotion_requested = true;
/*
* If we aren't planning to enter hot standby mode later, treat
* RECOVERY_STARTED as meaning we're out of startup, and report status
* accordingly.
*
* GPDB: Avoid PM_STATUS_STANDBY if promotion requested as wish "pg_ctl -w"
* to wait till connections can be actually accepted by the database via
* PM_STATUS_READY state instead. PM_STATUS_STANDBY will incorrectly show
* database is ready to accept connections during promotion.
*/
if (!EnableHotStandby && !promotion_requested)
{
AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_STANDBY);
#ifdef USE_SYSTEMD
sd_notify(0, "READY=1");
#endif
}
pmState = PM_RECOVERY;
}
if (CheckPostmasterSignal(PMSIGNAL_BEGIN_HOT_STANDBY) &&
pmState == PM_RECOVERY && Shutdown == NoShutdown)
{
/*
* Likewise, start other special children as needed.
*/
Assert(PgStatPID == 0);
PgStatPID = pgstat_start();
ereport(LOG,
(errmsg("database system is ready to accept read only connections")));
/* Report status */
AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_READY);
#ifdef USE_SYSTEMD
sd_notify(0, "READY=1");
#endif
pmState = PM_HOT_STANDBY;
/* Some workers may be scheduled to start now */
StartWorkerNeeded = true;
}
if (StartWorkerNeeded || HaveCrashedWorker)
maybe_start_bgworkers();
if (CheckPostmasterSignal(PMSIGNAL_WAKEN_ARCHIVER) &&
PgArchPID != 0)
{
/*
* Send SIGUSR1 to archiver process, to wake it up and begin archiving
* next WAL file.
*/
signal_child(PgArchPID, SIGUSR1);
}
/* Tell syslogger to rotate logfile if requested */
if (SysLoggerPID != 0)
{
if (CheckLogrotateSignal())
{
signal_child(SysLoggerPID, SIGUSR1);
RemoveLogrotateSignalFiles();
}
else if (CheckPostmasterSignal(PMSIGNAL_ROTATE_LOGFILE))
{
signal_child(SysLoggerPID, SIGUSR1);
}
}
if (CheckPostmasterSignal(PMSIGNAL_START_AUTOVAC_LAUNCHER) &&
Shutdown == NoShutdown)
{
/*
* Start one iteration of the autovacuum daemon, even if autovacuuming
* is nominally not enabled. This is so we can have an active defense
* against transaction ID wraparound. We set a flag for the main loop
* to do it rather than trying to do it here --- this is because the
* autovac process itself may send the signal, and we want to handle
* that by launching another iteration as soon as the current one
* completes.
*/
start_autovac_launcher = true;
}
if (CheckPostmasterSignal(PMSIGNAL_START_AUTOVAC_WORKER) &&
Shutdown == NoShutdown)
{
/* The autovacuum launcher wants us to start a worker process. */
StartAutovacuumWorker();
}
if (CheckPostmasterSignal(PMSIGNAL_START_WALRECEIVER))
{
/* Startup Process wants us to start the walreceiver process. */
/* Start immediately if possible, else remember request for later. */
WalReceiverRequested = true;
MaybeStartWalReceiver();
}
if (CheckPostmasterSignal(PMSIGNAL_WAKEN_FTS) && FtsProbePID() != 0)
{
signal_child(FtsProbePID(), SIGINT);
}
if (CheckPostmasterSignal(PMSIGNAL_DTM_RECOVERED))
{
/* Report status, dtx recovery completed successfully */
AddToDataDirLockFile(LOCK_FILE_LINE_PM_STATUS, PM_STATUS_DTM_RECOVERED);
}
if (CheckPostmasterSignal(PMSIGNAL_WAKEN_DTX_RECOVERY) && DtxRecoveryPID() != 0)
{
signal_child(DtxRecoveryPID(), SIGINT);
}
/*
* Try to advance postmaster's state machine, if a child requests it.
*
* Be careful about the order of this action relative to sigusr1_handler's
* other actions. Generally, this should be after other actions, in case
* they have effects PostmasterStateMachine would need to know about.
* However, we should do it before the CheckPromoteSignal step, which
* cannot have any (immediate) effect on the state machine, but does
* depend on what state we're in now.
*/
if (CheckPostmasterSignal(PMSIGNAL_ADVANCE_STATE_MACHINE))
{
PostmasterStateMachine();
}
if (StartupPID != 0 &&
(pmState == PM_STARTUP || pmState == PM_RECOVERY ||
pmState == PM_HOT_STANDBY || pmState == PM_WAIT_READONLY) &&
CheckPromoteSignal())
{
/* Tell startup process to finish recovery */
signal_child(StartupPID, SIGUSR2);
}
PG_SETMASK(&UnBlockSig);
errno = save_errno;
}
/*
* SIGTERM or SIGQUIT while processing startup packet.
* Clean up and exit(1).
*
* XXX: possible future improvement: try to send a message indicating
* why we are disconnecting. Problem is to be sure we don't block while
* doing so, nor mess up SSL initialization. In practice, if the client
* has wedged here, it probably couldn't do anything with the message anyway.
*/
static void
startup_die(SIGNAL_ARGS)
{
proc_exit(1);
}
/*
* Dummy signal handler
*
* We use this for signals that we don't actually use in the postmaster,
* but we do use in backends. If we were to SIG_IGN such signals in the
* postmaster, then a newly started backend might drop a signal that arrives
* before it's able to reconfigure its signal processing. (See notes in
* tcop/postgres.c.)
*/
static void
dummy_handler(SIGNAL_ARGS)
{
}
/*
* Timeout while processing startup packet.
* As for startup_die(), we clean up and exit(1).
*/
static void
StartupPacketTimeoutHandler(void)
{
proc_exit(1);
}
/*
* Generate a random cancel key.
*/
static bool
RandomCancelKey(int32 *cancel_key)
{
return pg_strong_random(cancel_key, sizeof(int32));
}
/*
* Count up number of child processes of specified types (dead_end children
* are always excluded).
*/
static int
CountChildren(int target)
{
dlist_iter iter;
int cnt = 0;
dlist_foreach(iter, &BackendList)
{
Backend *bp = dlist_container(Backend, elem, iter.cur);
if (bp->dead_end)
continue;
/*
* Since target == BACKEND_TYPE_ALL is the most common case, we test
* it first and avoid touching shared memory for every child.
*/
if (target != BACKEND_TYPE_ALL)
{
/*
* Assign bkend_type for any recently announced WAL Sender
* processes.
*/
if (bp->bkend_type == BACKEND_TYPE_NORMAL &&
IsPostmasterChildWalSender(bp->child_slot))
bp->bkend_type = BACKEND_TYPE_WALSND;
if (!(target & bp->bkend_type))
continue;
}
cnt++;
}
return cnt;
}
/*
* StartChildProcess -- start an auxiliary process for the postmaster
*
* "type" determines what kind of child will be started. All child types
* initially go to AuxiliaryProcessMain, which will handle common setup.
*
* Return value of StartChildProcess is subprocess' PID, or 0 if failed
* to start subprocess.
*/
static pid_t
StartChildProcess(AuxProcType type)
{
pid_t pid;
char *av[10];
int ac = 0;
char typebuf[32];
/*
* Set up command-line arguments for subprocess
*/
av[ac++] = "postgres";
#ifdef EXEC_BACKEND
av[ac++] = "--forkboot";
av[ac++] = NULL; /* filled in by postmaster_forkexec */
#endif
snprintf(typebuf, sizeof(typebuf), "-x%d", type);
av[ac++] = typebuf;
av[ac] = NULL;
Assert(ac < lengthof(av));
#ifdef EXEC_BACKEND
pid = postmaster_forkexec(ac, av);
#else /* !EXEC_BACKEND */
pid = fork_process();
if (pid == 0) /* child */
{
InitPostmasterChild();
/* Close the postmaster's sockets */
ClosePostmasterPorts(false);
/* Release postmaster's working memory context */
MemoryContextSwitchTo(TopMemoryContext);
MemoryContextDelete(PostmasterContext);
PostmasterContext = NULL;
AuxiliaryProcessMain(ac, av);
ExitPostmaster(0);
}
#endif /* EXEC_BACKEND */
if (pid < 0)
{
/* in parent, fork failed */
int save_errno = errno;
errno = save_errno;
switch (type)
{
case StartupProcess:
ereport(LOG,
(errmsg("could not fork startup process: %m")));
break;
case BgWriterProcess:
ereport(LOG,
(errmsg("could not fork background writer process: %m")));
break;
case CheckpointerProcess:
ereport(LOG,
(errmsg("could not fork checkpointer process: %m")));
break;
case WalWriterProcess:
ereport(LOG,
(errmsg("could not fork WAL writer process: %m")));
break;
case WalReceiverProcess:
ereport(LOG,
(errmsg("could not fork WAL receiver process: %m")));
break;
default:
ereport(LOG,
(errmsg("could not fork process: %m")));
break;
}
/*
* fork failure is fatal during startup, but there's no need to choke
* immediately if starting other child types fails.
*/
if (type == StartupProcess)
ExitPostmaster(1);
return 0;
}
/*
* in parent, successful fork
*/
return pid;
}
/*
* StartAutovacuumWorker
* Start an autovac worker process.
*
* This function is here because it enters the resulting PID into the
* postmaster's private backends list.
*
* NB -- this code very roughly matches BackendStartup.
*/
static void
StartAutovacuumWorker(void)
{
Backend *bn;
/*
* If not in condition to run a process, don't try, but handle it like a
* fork failure. This does not normally happen, since the signal is only
* supposed to be sent by autovacuum launcher when it's OK to do it, but
* we have to check to avoid race-condition problems during DB state
* changes.
*/
if (canAcceptConnections() == CAC_OK)
{
/*
* Compute the cancel key that will be assigned to this session. We
* probably don't need cancel keys for autovac workers, but we'd
* better have something random in the field to prevent unfriendly
* people from sending cancels to them.
*/
if (!RandomCancelKey(&MyCancelKey))
{
ereport(LOG,
(errcode(ERRCODE_INTERNAL_ERROR),
errmsg("could not generate random cancel key")));
return;
}
bn = (Backend *) malloc(sizeof(Backend));
if (bn)
{
bn->cancel_key = MyCancelKey;
/* Autovac workers are not dead_end and need a child slot */
bn->dead_end = false;
bn->child_slot = MyPMChildSlot = AssignPostmasterChildSlot();
bn->bgworker_notify = false;
bn->pid = StartAutoVacWorker();
if (bn->pid > 0)
{
bn->bkend_type = BACKEND_TYPE_AUTOVAC;
dlist_push_head(&BackendList, &bn->elem);
#ifdef EXEC_BACKEND
ShmemBackendArrayAdd(bn);
#endif
/* all OK */
return;
}
/*
* fork failed, fall through to report -- actual error message was
* logged by StartAutoVacWorker
*/
(void) ReleasePostmasterChildSlot(bn->child_slot);
free(bn);
}
else
ereport(LOG,
(errcode(ERRCODE_OUT_OF_MEMORY),
errmsg("out of memory")));
}
/*
* Report the failure to the launcher, if it's running. (If it's not, we
* might not even be connected to shared memory, so don't try to call
* AutoVacWorkerFailed.) Note that we also need to signal it so that it
* responds to the condition, but we don't do that here, instead waiting
* for ServerLoop to do it. This way we avoid a ping-pong signalling in
* quick succession between the autovac launcher and postmaster in case
* things get ugly.
*/
if (AutoVacPID != 0)
{
AutoVacWorkerFailed();
avlauncher_needs_signal = true;
}
}
/*
* MaybeStartWalReceiver
* Start the WAL receiver process, if not running and our state allows.
*
* Note: if WalReceiverPID is already nonzero, it might seem that we should
* clear WalReceiverRequested. However, there's a race condition if the
* walreceiver terminates and the startup process immediately requests a new
* one: it's quite possible to get the signal for the request before reaping
* the dead walreceiver process. Better to risk launching an extra
* walreceiver than to miss launching one we need. (The walreceiver code
* has logic to recognize that it should go away if not needed.)
*/
static void
MaybeStartWalReceiver(void)
{
if (WalReceiverPID == 0 &&
(pmState == PM_STARTUP || pmState == PM_RECOVERY ||
pmState == PM_HOT_STANDBY || pmState == PM_WAIT_READONLY) &&
Shutdown == NoShutdown)
{
WalReceiverPID = StartWalReceiver();
if (WalReceiverPID != 0)
{
WalReceiverRequested = false;
/* wal receiver has been launched */
SetMirrorReadyFlag();
}
/* else leave the flag set, so we'll try again later */
}
}
/*
* Create the opts file
*/
static bool
CreateOptsFile(int argc, char *argv[], char *fullprogname)
{
FILE *fp;
int i;
#define OPTS_FILE "postmaster.opts"
if ((fp = fopen(OPTS_FILE, "w")) == NULL)
{
elog(LOG, "could not create file \"%s\": %m", OPTS_FILE);
return false;
}
fprintf(fp, "%s", fullprogname);
for (i = 1; i < argc; i++)
fprintf(fp, " \"%s\"", argv[i]);
fputs("\n", fp);
if (fclose(fp))
{
elog(LOG, "could not write file \"%s\": %m", OPTS_FILE);
return false;
}
return true;
}
/*
* MaxLivePostmasterChildren
*
* This reports the number of entries needed in per-child-process arrays
* (the PMChildFlags array, and if EXEC_BACKEND the ShmemBackendArray).
* These arrays include regular backends, autovac workers, walsenders
* and background workers, but not special children nor dead_end children.
* This allows the arrays to have a fixed maximum size, to wit the same
* too-many-children limit enforced by canAcceptConnections(). The exact value
* isn't too critical as long as it's more than MaxBackends.
*/
int
MaxLivePostmasterChildren(void)
{
return 2 * (MaxConnections + autovacuum_max_workers + 1 +
max_wal_senders + max_worker_processes);
}
/*
* Connect background worker to a database.
*/
void
BackgroundWorkerInitializeConnection(const char *dbname, const char *username, uint32 flags)
{
BackgroundWorker *worker = MyBgworkerEntry;
/* XXX is this the right errcode? */
if (!(worker->bgw_flags & BGWORKER_BACKEND_DATABASE_CONNECTION))
ereport(FATAL,
(errcode(ERRCODE_PROGRAM_LIMIT_EXCEEDED),
errmsg("database connection requirement not indicated during registration")));
InitPostgres(dbname, InvalidOid, username, InvalidOid, NULL, (flags & BGWORKER_BYPASS_ALLOWCONN) != 0);
/* it had better not gotten out of "init" mode yet */
if (!IsInitProcessingMode())
ereport(ERROR,
(errmsg("invalid processing mode in background worker")));
SetProcessingMode(NormalProcessing);
}
/*
* Connect background worker to a database using OIDs.
*/
void
BackgroundWorkerInitializeConnectionByOid(Oid dboid, Oid useroid, uint32 flags)
{
BackgroundWorker *worker = MyBgworkerEntry;
/* XXX is this the right errcode? */
if (!(worker->bgw_flags & BGWORKER_BACKEND_DATABASE_CONNECTION))
ereport(FATAL,
(errcode(ERRCODE_PROGRAM_LIMIT_EXCEEDED),
errmsg("database connection requirement not indicated during registration")));
InitPostgres(NULL, dboid, NULL, useroid, NULL, (flags & BGWORKER_BYPASS_ALLOWCONN) != 0);
/* it had better not gotten out of "init" mode yet */
if (!IsInitProcessingMode())
ereport(ERROR,
(errmsg("invalid processing mode in background worker")));
SetProcessingMode(NormalProcessing);
}
/*
* Block/unblock signals in a background worker
*/
void
BackgroundWorkerBlockSignals(void)
{
PG_SETMASK(&BlockSig);
}
void
BackgroundWorkerUnblockSignals(void)
{
PG_SETMASK(&UnBlockSig);
}
#ifdef EXEC_BACKEND
static pid_t
bgworker_forkexec(int shmem_slot)
{
char *av[10];
int ac = 0;
char forkav[MAXPGPATH];
snprintf(forkav, MAXPGPATH, "--forkbgworker=%d", shmem_slot);
av[ac++] = "postgres";
av[ac++] = forkav;
av[ac++] = NULL; /* filled in by postmaster_forkexec */
av[ac] = NULL;
Assert(ac < lengthof(av));
return postmaster_forkexec(ac, av);
}
#endif
/*
* Start a new bgworker.
* Starting time conditions must have been checked already.
*
* Returns true on success, false on failure.
* In either case, update the RegisteredBgWorker's state appropriately.
*
* This code is heavily based on autovacuum.c, q.v.
*/
static bool
do_start_bgworker(RegisteredBgWorker *rw)
{
pid_t worker_pid;
Assert(rw->rw_pid == 0);
/*
* Allocate and assign the Backend element. Note we must do this before
* forking, so that we can handle out of memory properly.
*
* Treat failure as though the worker had crashed. That way, the
* postmaster will wait a bit before attempting to start it again; if it
* tried again right away, most likely it'd find itself repeating the
* out-of-memory or fork failure condition.
*/
if (!assign_backendlist_entry(rw))
{
rw->rw_crashed_at = GetCurrentTimestamp();
return false;
}
ereport(DEBUG1,
(errmsg("starting background worker process \"%s\"",
rw->rw_worker.bgw_name)));
#ifdef EXEC_BACKEND
switch ((worker_pid = bgworker_forkexec(rw->rw_shmem_slot)))
#else
switch ((worker_pid = fork_process()))
#endif
{
case -1:
/* in postmaster, fork failed ... */
ereport(LOG,
(errmsg("could not fork worker process: %m")));
/* undo what assign_backendlist_entry did */
ReleasePostmasterChildSlot(rw->rw_child_slot);
rw->rw_child_slot = 0;
free(rw->rw_backend);
rw->rw_backend = NULL;
/* mark entry as crashed, so we'll try again later */
rw->rw_crashed_at = GetCurrentTimestamp();
break;
#ifndef EXEC_BACKEND
case 0:
/* in postmaster child ... */
InitPostmasterChild();
/* Close the postmaster's sockets */
ClosePostmasterPorts(false);
/*
* Before blowing away PostmasterContext, save this bgworker's
* data where it can find it.
*/
MyBgworkerEntry = (BackgroundWorker *)
MemoryContextAlloc(TopMemoryContext, sizeof(BackgroundWorker));
memcpy(MyBgworkerEntry, &rw->rw_worker, sizeof(BackgroundWorker));
/* Release postmaster's working memory context */
MemoryContextSwitchTo(TopMemoryContext);
MemoryContextDelete(PostmasterContext);
PostmasterContext = NULL;
StartBackgroundWorker();
exit(1); /* should not get here */
break;
#endif
default:
/* in postmaster, fork successful ... */
rw->rw_pid = worker_pid;
rw->rw_backend->pid = rw->rw_pid;
ReportBackgroundWorkerPID(rw);
/* add new worker to lists of backends */
dlist_push_head(&BackendList, &rw->rw_backend->elem);
#ifdef EXEC_BACKEND
ShmemBackendArrayAdd(rw->rw_backend);
#endif
return true;
}
return false;
}
/*
* Does the current postmaster state require starting a worker with the
* specified start_time?
*/
static bool
bgworker_should_start_now(BgWorkerStartTime start_time)
{
switch (pmState)
{
case PM_NO_CHILDREN:
case PM_WAIT_DEAD_END:
case PM_SHUTDOWN_2:
case PM_SHUTDOWN:
case PM_WAIT_BACKENDS:
case PM_WAIT_READONLY:
case PM_WAIT_BACKUP:
break;
case PM_RUN:
if (start_time == BgWorkerStart_DtxRecovering)
return true;
if (start_time == BgWorkerStart_RecoveryFinished)
return true;
/* fall through */
case PM_HOT_STANDBY:
if (start_time == BgWorkerStart_ConsistentState)
return true;
/* fall through */
case PM_RECOVERY:
case PM_STARTUP:
case PM_INIT:
if (start_time == BgWorkerStart_PostmasterStart)
return true;
/* fall through */
}
return false;
}
/*
* Does specified start_time need distributed transactions been recovered?
*/
static bool
bgworker_should_start_mpp(BackgroundWorker *worker)
{
BgWorkerStartTime start_time = worker->bgw_start_time;
/*
* background worker is not scheduled until distributed transactions
* are recovered if it needs to start at BgWorkerStart_RecoveryFinished
* or BgWorkerStart_ConsistentState because it's not safe to do a read
* or write if DTX is not recovered.
*/
if (Gp_role == GP_ROLE_DISPATCH)
{
if (!*shmDtmStarted &&
(start_time == BgWorkerStart_ConsistentState ||
start_time == BgWorkerStart_RecoveryFinished))
return false;
}
return true;
}
/*
* Allocate the Backend struct for a connected background worker, but don't
* add it to the list of backends just yet.
*
* On failure, return false without changing any worker state.
*
* Some info from the Backend is copied into the passed rw.
*/
static bool
assign_backendlist_entry(RegisteredBgWorker *rw)
{
Backend *bn;
/*
* Compute the cancel key that will be assigned to this session. We
* probably don't need cancel keys for background workers, but we'd better
* have something random in the field to prevent unfriendly people from
* sending cancels to them.
*/
if (!RandomCancelKey(&MyCancelKey))
{
ereport(LOG,
(errcode(ERRCODE_INTERNAL_ERROR),
errmsg("could not generate random cancel key")));
return false;
}
bn = malloc(sizeof(Backend));
if (bn == NULL)
{
ereport(LOG,
(errcode(ERRCODE_OUT_OF_MEMORY),
errmsg("out of memory")));
return false;
}
bn->cancel_key = MyCancelKey;
bn->child_slot = MyPMChildSlot = AssignPostmasterChildSlot();
bn->bkend_type = BACKEND_TYPE_BGWORKER;
bn->dead_end = false;
bn->bgworker_notify = false;
rw->rw_backend = bn;
rw->rw_child_slot = bn->child_slot;
return true;
}
/*
* If the time is right, start background worker(s).
*
* As a side effect, the bgworker control variables are set or reset
* depending on whether more workers may need to be started.
*
* We limit the number of workers started per call, to avoid consuming the
* postmaster's attention for too long when many such requests are pending.
* As long as StartWorkerNeeded is true, ServerLoop will not block and will
* call this function again after dealing with any other issues.
*/
static void
maybe_start_bgworkers(void)
{
#define MAX_BGWORKERS_TO_LAUNCH 100
int num_launched = 0;
TimestampTz now = 0;
slist_mutable_iter iter;
/*
* During crash recovery, we have no need to be called until the state
* transition out of recovery.
*/
if (FatalError)
{
StartWorkerNeeded = false;
HaveCrashedWorker = false;
return;
}
/* Don't need to be called again unless we find a reason for it below */
StartWorkerNeeded = false;
HaveCrashedWorker = false;
slist_foreach_modify(iter, &BackgroundWorkerList)
{
RegisteredBgWorker *rw;
rw = slist_container(RegisteredBgWorker, rw_lnode, iter.cur);
/* ignore if already running */
if (rw->rw_pid != 0)
continue;
/* if marked for death, clean up and remove from list */
if (rw->rw_terminate)
{
ForgetBackgroundWorker(&iter);
continue;
}
/*
* If this worker has crashed previously, maybe it needs to be
* restarted (unless on registration it specified it doesn't want to
* be restarted at all). Check how long ago did a crash last happen.
* If the last crash is too recent, don't start it right away; let it
* be restarted once enough time has passed.
*/
if (rw->rw_crashed_at != 0)
{
if (rw->rw_worker.bgw_restart_time == BGW_NEVER_RESTART)
{
int notify_pid;
notify_pid = rw->rw_worker.bgw_notify_pid;
ForgetBackgroundWorker(&iter);
/* Report worker is gone now. */
if (notify_pid != 0)
kill(notify_pid, SIGUSR1);
continue;
}
/* read system time only when needed */
if (now == 0)
now = GetCurrentTimestamp();
if (!TimestampDifferenceExceeds(rw->rw_crashed_at, now,
rw->rw_worker.bgw_restart_time * 1000))
{
/* Set flag to remember that we have workers to start later */
HaveCrashedWorker = true;
continue;
}
}
if (bgworker_should_start_now(rw->rw_worker.bgw_start_time))
{
if (!bgworker_should_start_mpp(&rw->rw_worker))
continue;
/* reset crash time before trying to start worker */
rw->rw_crashed_at = 0;
/*
* Try to start the worker.
*
* On failure, give up processing workers for now, but set
* StartWorkerNeeded so we'll come back here on the next iteration
* of ServerLoop to try again. (We don't want to wait, because
* there might be additional ready-to-run workers.) We could set
* HaveCrashedWorker as well, since this worker is now marked
* crashed, but there's no need because the next run of this
* function will do that.
*/
if (!do_start_bgworker(rw))
{
StartWorkerNeeded = true;
return;
}
/*
* If we've launched as many workers as allowed, quit, but have
* ServerLoop call us again to look for additional ready-to-run
* workers. There might not be any, but we'll find out the next
* time we run.
*/
if (++num_launched >= MAX_BGWORKERS_TO_LAUNCH)
{
StartWorkerNeeded = true;
return;
}
}
}
}
/*
* When a backend asks to be notified about worker state changes, we
* set a flag in its backend entry. The background worker machinery needs
* to know when such backends exit.
*/
bool
PostmasterMarkPIDForWorkerNotify(int pid)
{
dlist_iter iter;
Backend *bp;
dlist_foreach(iter, &BackendList)
{
bp = dlist_container(Backend, elem, iter.cur);
if (bp->pid == pid)
{
bp->bgworker_notify = true;
return true;
}
}
return false;
}
#ifdef EXEC_BACKEND
/*
* The following need to be available to the save/restore_backend_variables
* functions. They are marked NON_EXEC_STATIC in their home modules.
*/
extern slock_t *ShmemLock;
extern slock_t *ProcStructLock;
extern PGPROC *AuxiliaryProcs;
extern PMSignalData *PMSignalState;
extern pgsocket pgStatSock;
extern pg_time_t first_syslogger_file_time;
#ifndef WIN32
#define write_inheritable_socket(dest, src, childpid) ((*(dest) = (src)), true)
#define read_inheritable_socket(dest, src) (*(dest) = *(src))
#else
static bool write_duplicated_handle(HANDLE *dest, HANDLE src, HANDLE child);
static bool write_inheritable_socket(InheritableSocket *dest, SOCKET src,
pid_t childPid);
static void read_inheritable_socket(SOCKET *dest, InheritableSocket *src);
#endif
/* Save critical backend variables into the BackendParameters struct */
#ifndef WIN32
static bool
save_backend_variables(BackendParameters *param, Port *port)
#else
static bool
save_backend_variables(BackendParameters *param, Port *port,
HANDLE childProcess, pid_t childPid)
#endif
{
memcpy(¶m->port, port, sizeof(Port));
if (!write_inheritable_socket(¶m->portsocket, port->sock, childPid))
return false;
strlcpy(param->DataDir, DataDir, MAXPGPATH);
memcpy(¶m->ListenSocket, &ListenSocket, sizeof(ListenSocket));
param->MyCancelKey = MyCancelKey;
param->MyPMChildSlot = MyPMChildSlot;
#ifdef WIN32
param->ShmemProtectiveRegion = ShmemProtectiveRegion;
#endif
param->UsedShmemSegID = UsedShmemSegID;
param->UsedShmemSegAddr = UsedShmemSegAddr;
param->ShmemLock = ShmemLock;
param->ShmemVariableCache = ShmemVariableCache;
param->ShmemBackendArray = ShmemBackendArray;
#ifndef HAVE_SPINLOCKS
param->SpinlockSemaArray = SpinlockSemaArray;
#endif
param->NamedLWLockTrancheRequests = NamedLWLockTrancheRequests;
param->NamedLWLockTrancheArray = NamedLWLockTrancheArray;
param->MainLWLockArray = MainLWLockArray;
param->ProcStructLock = ProcStructLock;
param->ProcGlobal = ProcGlobal;
param->AuxiliaryProcs = AuxiliaryProcs;
param->PreparedXactProcs = PreparedXactProcs;
param->PMSignalState = PMSignalState;
if (!write_inheritable_socket(¶m->pgStatSock, pgStatSock, childPid))
return false;
param->PostmasterPid = PostmasterPid;
param->PgStartTime = PgStartTime;
param->PgReloadTime = PgReloadTime;
param->first_syslogger_file_time = first_syslogger_file_time;
param->redirection_done = redirection_done;
param->IsBinaryUpgrade = IsBinaryUpgrade;
param->ConvertMasterDataDirToSegment = ConvertMasterDataDirToSegment;
param->max_safe_fds = max_safe_fds;
param->MaxBackends = MaxBackends;
#ifdef WIN32
param->PostmasterHandle = PostmasterHandle;
if (!write_duplicated_handle(¶m->initial_signal_pipe,
pgwin32_create_signal_listener(childPid),
childProcess))
return false;
#else
memcpy(¶m->postmaster_alive_fds, &postmaster_alive_fds,
sizeof(postmaster_alive_fds));
#endif
memcpy(¶m->syslogPipe, &syslogPipe, sizeof(syslogPipe));
strlcpy(param->my_exec_path, my_exec_path, MAXPGPATH);
strlcpy(param->pkglib_path, pkglib_path, MAXPGPATH);
strlcpy(param->ExtraOptions, ExtraOptions, MAXPGPATH);
return true;
}
#ifdef WIN32
/*
* Duplicate a handle for usage in a child process, and write the child
* process instance of the handle to the parameter file.
*/
static bool
write_duplicated_handle(HANDLE *dest, HANDLE src, HANDLE childProcess)
{
HANDLE hChild = INVALID_HANDLE_VALUE;
if (!DuplicateHandle(GetCurrentProcess(),
src,
childProcess,
&hChild,
0,
TRUE,
DUPLICATE_CLOSE_SOURCE | DUPLICATE_SAME_ACCESS))
{
ereport(LOG,
(errmsg_internal("could not duplicate handle to be written to backend parameter file: error code %lu",
GetLastError())));
return false;
}
*dest = hChild;
return true;
}
/*
* Duplicate a socket for usage in a child process, and write the resulting
* structure to the parameter file.
* This is required because a number of LSPs (Layered Service Providers) very
* common on Windows (antivirus, firewalls, download managers etc) break
* straight socket inheritance.
*/
static bool
write_inheritable_socket(InheritableSocket *dest, SOCKET src, pid_t childpid)
{
dest->origsocket = src;
if (src != 0 && src != PGINVALID_SOCKET)
{
/* Actual socket */
if (WSADuplicateSocket(src, childpid, &dest->wsainfo) != 0)
{
ereport(LOG,
(errmsg("could not duplicate socket %d for use in backend: error code %d",
(int) src, WSAGetLastError())));
return false;
}
}
return true;
}
/*
* Read a duplicate socket structure back, and get the socket descriptor.
*/
static void
read_inheritable_socket(SOCKET *dest, InheritableSocket *src)
{
SOCKET s;
if (src->origsocket == PGINVALID_SOCKET || src->origsocket == 0)
{
/* Not a real socket! */
*dest = src->origsocket;
}
else
{
/* Actual socket, so create from structure */
s = WSASocket(FROM_PROTOCOL_INFO,
FROM_PROTOCOL_INFO,
FROM_PROTOCOL_INFO,
&src->wsainfo,
0,
0);
if (s == INVALID_SOCKET)
{
write_stderr("could not create inherited socket: error code %d\n",
WSAGetLastError());
exit(1);
}
*dest = s;
/*
* To make sure we don't get two references to the same socket, close
* the original one. (This would happen when inheritance actually
* works..
*/
closesocket(src->origsocket);
}
}
#endif
static void
read_backend_variables(char *id, Port *port)
{
BackendParameters param;
#ifndef WIN32
/* Non-win32 implementation reads from file */
FILE *fp;
/* Open file */
fp = AllocateFile(id, PG_BINARY_R);
if (!fp)
{
write_stderr("could not open backend variables file \"%s\": %s\n",
id, strerror(errno));
exit(1);
}
if (fread(¶m, sizeof(param), 1, fp) != 1)
{
write_stderr("could not read from backend variables file \"%s\": %s\n",
id, strerror(errno));
exit(1);
}
/* Release file */
FreeFile(fp);
if (unlink(id) != 0)
{
write_stderr("could not remove file \"%s\": %s\n",
id, strerror(errno));
exit(1);
}
#else
/* Win32 version uses mapped file */
HANDLE paramHandle;
BackendParameters *paramp;
#ifdef _WIN64
paramHandle = (HANDLE) _atoi64(id);
#else
paramHandle = (HANDLE) atol(id);
#endif
paramp = MapViewOfFile(paramHandle, FILE_MAP_READ, 0, 0, 0);
if (!paramp)
{
write_stderr("could not map view of backend variables: error code %lu\n",
GetLastError());
exit(1);
}
memcpy(¶m, paramp, sizeof(BackendParameters));
if (!UnmapViewOfFile(paramp))
{
write_stderr("could not unmap view of backend variables: error code %lu\n",
GetLastError());
exit(1);
}
if (!CloseHandle(paramHandle))
{
write_stderr("could not close handle to backend parameter variables: error code %lu\n",
GetLastError());
exit(1);
}
#endif
restore_backend_variables(¶m, port);
}
/* Restore critical backend variables from the BackendParameters struct */
static void
restore_backend_variables(BackendParameters *param, Port *port)
{
memcpy(port, ¶m->port, sizeof(Port));
read_inheritable_socket(&port->sock, ¶m->portsocket);
SetDataDir(param->DataDir);
memcpy(&ListenSocket, ¶m->ListenSocket, sizeof(ListenSocket));
MyCancelKey = param->MyCancelKey;
MyPMChildSlot = param->MyPMChildSlot;
#ifdef WIN32
ShmemProtectiveRegion = param->ShmemProtectiveRegion;
#endif
UsedShmemSegID = param->UsedShmemSegID;
UsedShmemSegAddr = param->UsedShmemSegAddr;
ShmemLock = param->ShmemLock;
ShmemVariableCache = param->ShmemVariableCache;
ShmemBackendArray = param->ShmemBackendArray;
#ifndef HAVE_SPINLOCKS
SpinlockSemaArray = param->SpinlockSemaArray;
#endif
NamedLWLockTrancheRequests = param->NamedLWLockTrancheRequests;
NamedLWLockTrancheArray = param->NamedLWLockTrancheArray;
MainLWLockArray = param->MainLWLockArray;
ProcStructLock = param->ProcStructLock;
ProcGlobal = param->ProcGlobal;
AuxiliaryProcs = param->AuxiliaryProcs;
PreparedXactProcs = param->PreparedXactProcs;
PMSignalState = param->PMSignalState;
read_inheritable_socket(&pgStatSock, ¶m->pgStatSock);
PostmasterPid = param->PostmasterPid;
PgStartTime = param->PgStartTime;
PgReloadTime = param->PgReloadTime;
first_syslogger_file_time = param->first_syslogger_file_time;
redirection_done = param->redirection_done;
IsBinaryUpgrade = param->IsBinaryUpgrade;
ConvertMasterDataDirToSegment = param->ConvertMasterDataDirToSegment;
max_safe_fds = param->max_safe_fds;
MaxBackends = param->MaxBackends;
#ifdef WIN32
PostmasterHandle = param->PostmasterHandle;
pgwin32_initial_signal_pipe = param->initial_signal_pipe;
#else
memcpy(&postmaster_alive_fds, ¶m->postmaster_alive_fds,
sizeof(postmaster_alive_fds));
#endif
memcpy(&syslogPipe, ¶m->syslogPipe, sizeof(syslogPipe));
strlcpy(my_exec_path, param->my_exec_path, MAXPGPATH);
strlcpy(pkglib_path, param->pkglib_path, MAXPGPATH);
strlcpy(ExtraOptions, param->ExtraOptions, MAXPGPATH);
}
Size
ShmemBackendArraySize(void)
{
return mul_size(MaxLivePostmasterChildren(), sizeof(Backend));
}
void
ShmemBackendArrayAllocation(void)
{
Size size = ShmemBackendArraySize();
ShmemBackendArray = (Backend *) ShmemAlloc(size);
/* Mark all slots as empty */
memset(ShmemBackendArray, 0, size);
}
static void
ShmemBackendArrayAdd(Backend *bn)
{
/* The array slot corresponding to my PMChildSlot should be free */
int i = bn->child_slot - 1;
Assert(ShmemBackendArray[i].pid == 0);
ShmemBackendArray[i] = *bn;
}
static void
ShmemBackendArrayRemove(Backend *bn)
{
int i = bn->child_slot - 1;
Assert(ShmemBackendArray[i].pid == bn->pid);
/* Mark the slot as empty */
ShmemBackendArray[i].pid = 0;
}
#endif /* EXEC_BACKEND */
#ifdef WIN32
/*
* Subset implementation of waitpid() for Windows. We assume pid is -1
* (that is, check all child processes) and options is WNOHANG (don't wait).
*/
static pid_t
waitpid(pid_t pid, int *exitstatus, int options)
{
DWORD dwd;
ULONG_PTR key;
OVERLAPPED *ovl;
/*
* Check if there are any dead children. If there are, return the pid of
* the first one that died.
*/
if (GetQueuedCompletionStatus(win32ChildQueue, &dwd, &key, &ovl, 0))
{
*exitstatus = (int) key;
return dwd;
}
return -1;
}
/*
* Note! Code below executes on a thread pool! All operations must
* be thread safe! Note that elog() and friends must *not* be used.
*/
static void WINAPI
pgwin32_deadchild_callback(PVOID lpParameter, BOOLEAN TimerOrWaitFired)
{
win32_deadchild_waitinfo *childinfo = (win32_deadchild_waitinfo *) lpParameter;
DWORD exitcode;
if (TimerOrWaitFired)
return; /* timeout. Should never happen, since we use
* INFINITE as timeout value. */
/*
* Remove handle from wait - required even though it's set to wait only
* once
*/
UnregisterWaitEx(childinfo->waitHandle, NULL);
if (!GetExitCodeProcess(childinfo->procHandle, &exitcode))
{
/*
* Should never happen. Inform user and set a fixed exitcode.
*/
write_stderr("could not read exit code for process\n");
exitcode = 255;
}
if (!PostQueuedCompletionStatus(win32ChildQueue, childinfo->procId, (ULONG_PTR) exitcode, NULL))
write_stderr("could not post child completion status\n");
/*
* Handle is per-process, so we close it here instead of in the
* originating thread
*/
CloseHandle(childinfo->procHandle);
/*
* Free struct that was allocated before the call to
* RegisterWaitForSingleObject()
*/
free(childinfo);
/* Queue SIGCHLD signal */
pg_queue_signal(SIGCHLD);
}
#endif /* WIN32 */
/*
* Initialize one and only handle for monitoring postmaster death.
*
* Called once in the postmaster, so that child processes can subsequently
* monitor if their parent is dead.
*/
static void
InitPostmasterDeathWatchHandle(void)
{
#ifndef WIN32
/*
* Create a pipe. Postmaster holds the write end of the pipe open
* (POSTMASTER_FD_OWN), and children hold the read end. Children can pass
* the read file descriptor to select() to wake up in case postmaster
* dies, or check for postmaster death with a (read() == 0). Children must
* close the write end as soon as possible after forking, because EOF
* won't be signaled in the read end until all processes have closed the
* write fd. That is taken care of in ClosePostmasterPorts().
*/
Assert(MyProcPid == PostmasterPid);
if (pipe(postmaster_alive_fds) < 0)
ereport(FATAL,
(errcode_for_file_access(),
errmsg_internal("could not create pipe to monitor postmaster death: %m")));
/*
* Set O_NONBLOCK to allow testing for the fd's presence with a read()
* call.
*/
if (fcntl(postmaster_alive_fds[POSTMASTER_FD_WATCH], F_SETFL, O_NONBLOCK) == -1)
ereport(FATAL,
(errcode_for_socket_access(),
errmsg_internal("could not set postmaster death monitoring pipe to nonblocking mode: %m")));
#else
/*
* On Windows, we use a process handle for the same purpose.
*/
if (DuplicateHandle(GetCurrentProcess(),
GetCurrentProcess(),
GetCurrentProcess(),
&PostmasterHandle,
0,
TRUE,
DUPLICATE_SAME_ACCESS) == 0)
ereport(FATAL,
(errmsg_internal("could not duplicate postmaster handle: error code %lu",
GetLastError())));
#endif /* WIN32 */
}
#if defined(HAVE_NUMA_H) && defined(HAVE_LIBNUMA)
/* LINUX */
static void
setProcAffinity(int id)
{
int limit;
nodemask_t mask;
if (numa_available() < 0)
{
elog(LOG, "Numa unavailable, will remain unbound.");
return;
}
limit = numa_max_node() + 1;
nodemask_zero(&mask);
nodemask_set(&mask, (id % limit));
elog(LOG, "Numa binding to numa-node %d", (id % limit));
/* this sets the memory */
numa_bind(&mask);
return;
}
#else
/* UNSUPPORTED */
static void
setProcAffinity(int id)
{
elog(LOG, "gp_set_proc_affinity setting ignored; feature not configured");
}
#endif
void
load_auxiliary_libraries(void)
{
BackgroundWorker *worker;
slist_iter iter;
int i;
bool registered;
/* load all auxiliary workers */
for (i = 0; i < MaxPMAuxProc; i++)
{
worker = &PMAuxProcList[i];
if (worker->bgw_start_rule &&
!worker->bgw_start_rule(worker->bgw_main_arg))
continue;
/* skip already registered worker */
registered = false;
slist_foreach(iter, &BackgroundWorkerList)
{
RegisteredBgWorker *rw;
rw = slist_container(RegisteredBgWorker, rw_lnode, iter.cur);
if (!strcmp(rw->rw_worker.bgw_name, worker->bgw_name) &&
strcmp(rw->rw_worker.bgw_library_name, worker->bgw_library_name) == 0 &&
strcmp(rw->rw_worker.bgw_function_name, worker->bgw_function_name) == 0 &&
rw->rw_worker.bgw_start_rule == worker->bgw_start_rule)
registered = true;
}
if (registered)
continue;
RegisterBackgroundWorker(worker);
}
}
bool
isAuxiliaryBgWorker(BackgroundWorker *worker)
{
BackgroundWorker *aux_worker;
int i;
Assert(worker);
for (i = 0; i < MaxPMAuxProc; i++)
{
aux_worker = &PMAuxProcList[i];
if (!strcmp(aux_worker->bgw_name, worker->bgw_name) &&
strcmp(aux_worker->bgw_library_name, worker->bgw_library_name) == 0 &&
strcmp(aux_worker->bgw_function_name, worker->bgw_function_name) == 0 &&
aux_worker->bgw_start_rule == worker->bgw_start_rule)
return true;
}
return false;
}
bool
amAuxiliaryBgWorker(void)
{
if (!IsBackgroundWorker)
return false;
Assert(MyBgworkerEntry);
return isAuxiliaryBgWorker(MyBgworkerEntry);
}
相关信息
相关文章
0
赞
热门推荐
-
2、 - 优质文章
-
3、 gate.io
-
8、 openharmony
-
9、 golang