greenplumn dt 源码

greenplumn dt 代码

文件路径：/src/interfaces/ecpg/pgtypeslib/dt.h

/* src/interfaces/ecpg/pgtypeslib/dt.h */

#ifndef DT_H
#define DT_H

#include <pgtypes_timestamp.h>

#define MAXTZLEN			 10

typedef int32 fsec_t;

#define USE_POSTGRES_DATES				0
#define USE_ISO_DATES					1
#define USE_SQL_DATES					2
#define USE_GERMAN_DATES				3

#define INTSTYLE_POSTGRES			  0
#define INTSTYLE_POSTGRES_VERBOSE	  1
#define INTSTYLE_SQL_STANDARD		  2
#define INTSTYLE_ISO_8601			  3

#define INTERVAL_FULL_RANGE (0x7FFF)
#define INTERVAL_MASK(b) (1 << (b))
#define MAX_INTERVAL_PRECISION 6

#define DTERR_BAD_FORMAT		(-1)
#define DTERR_FIELD_OVERFLOW	(-2)
#define DTERR_MD_FIELD_OVERFLOW (-3)	/* triggers hint about DateStyle */
#define DTERR_INTERVAL_OVERFLOW (-4)
#define DTERR_TZDISP_OVERFLOW	(-5)


#define DAGO			"ago"
#define DCURRENT		"current"
#define EPOCH			"epoch"
#define INVALID			"invalid"
#define EARLY			"-infinity"
#define LATE			"infinity"
#define NOW				"now"
#define TODAY			"today"
#define TOMORROW		"tomorrow"
#define YESTERDAY		"yesterday"
#define ZULU			"zulu"

#define DMICROSEC		"usecond"
#define DMILLISEC		"msecond"
#define DSECOND			"second"
#define DMINUTE			"minute"
#define DHOUR			"hour"
#define DDAY			"day"
#define DWEEK			"week"
#define DMONTH			"month"
#define DQUARTER		"quarter"
#define DYEAR			"year"
#define DDECADE			"decade"
#define DCENTURY		"century"
#define DMILLENNIUM		"millennium"
#define DA_D			"ad"
#define DB_C			"bc"
#define DTIMEZONE		"timezone"

/*
 * Fundamental time field definitions for parsing.
 *
 *	Meridian:  am, pm, or 24-hour style.
 *	Millennium: ad, bc
 */

#define AM		0
#define PM		1
#define HR24	2

#define AD		0
#define BC		1

/*
 * Field types for time decoding.
 *
 * Can't have more of these than there are bits in an unsigned int
 * since these are turned into bit masks during parsing and decoding.
 *
 * Furthermore, the values for YEAR, MONTH, DAY, HOUR, MINUTE, SECOND
 * must be in the range 0..14 so that the associated bitmasks can fit
 * into the left half of an INTERVAL's typmod value.
 *
 * Copy&pasted these values from src/include/utils/datetime.h
 * 2008-11-20, changing a number of their values.
 */

#define RESERV	0
#define MONTH	1
#define YEAR	2
#define DAY		3
#define JULIAN	4
#define TZ		5				/* fixed-offset timezone abbreviation */
#define DTZ		6				/* fixed-offset timezone abbrev, DST */
#define DYNTZ	7				/* dynamic timezone abbr (unimplemented) */
#define IGNORE_DTF	8
#define AMPM	9
#define HOUR	10
#define MINUTE	11
#define SECOND	12
#define MILLISECOND 13
#define MICROSECOND 14
#define DOY		15
#define DOW		16
#define UNITS	17
#define ADBC	18
/* these are only for relative dates */
#define AGO		19
#define ABS_BEFORE		20
#define ABS_AFTER		21
/* generic fields to help with parsing */
#define ISODATE 22
#define ISOTIME 23
/* hack for parsing two-word timezone specs "MET DST" etc */
#define DTZMOD	28				/* "DST" as a separate word */
/* reserved for unrecognized string values */
#define UNKNOWN_FIELD	31


/*
 * Token field definitions for time parsing and decoding.
 *
 * Some field type codes (see above) use these as the "value" in datetktbl[].
 * These are also used for bit masks in DecodeDateTime and friends
 *	so actually restrict them to within [0,31] for now.
 * - thomas 97/06/19
 * Not all of these fields are used for masks in DecodeDateTime
 *	so allow some larger than 31. - thomas 1997-11-17
 *
 * Caution: there are undocumented assumptions in the code that most of these
 * values are not equal to IGNORE_DTF nor RESERV.  Be very careful when
 * renumbering values in either of these apparently-independent lists :-(
 */

#define DTK_NUMBER		0
#define DTK_STRING		1

#define DTK_DATE		2
#define DTK_TIME		3
#define DTK_TZ			4
#define DTK_AGO			5

#define DTK_SPECIAL		6
#define DTK_EARLY		9
#define DTK_LATE		10
#define DTK_EPOCH		11
#define DTK_NOW			12
#define DTK_YESTERDAY	13
#define DTK_TODAY		14
#define DTK_TOMORROW	15
#define DTK_ZULU		16

#define DTK_DELTA		17
#define DTK_SECOND		18
#define DTK_MINUTE		19
#define DTK_HOUR		20
#define DTK_DAY			21
#define DTK_WEEK		22
#define DTK_MONTH		23
#define DTK_QUARTER		24
#define DTK_YEAR		25
#define DTK_DECADE		26
#define DTK_CENTURY		27
#define DTK_MILLENNIUM	28
#define DTK_MILLISEC	29
#define DTK_MICROSEC	30
#define DTK_JULIAN		31

#define DTK_DOW			32
#define DTK_DOY			33
#define DTK_TZ_HOUR		34
#define DTK_TZ_MINUTE	35
#define DTK_ISOYEAR		36
#define DTK_ISODOW		37


/*
 * Bit mask definitions for time parsing.
 */
/* Copy&pasted these values from src/include/utils/datetime.h */
#define DTK_M(t)		(0x01 << (t))
#define DTK_ALL_SECS_M	   (DTK_M(SECOND) | DTK_M(MILLISECOND) | DTK_M(MICROSECOND))
#define DTK_DATE_M		(DTK_M(YEAR) | DTK_M(MONTH) | DTK_M(DAY))
#define DTK_TIME_M		(DTK_M(HOUR) | DTK_M(MINUTE) | DTK_M(SECOND))

/*
 * Working buffer size for input and output of interval, timestamp, etc.
 * Inputs that need more working space will be rejected early.  Longer outputs
 * will overrun buffers, so this must suffice for all possible output.  As of
 * this writing, PGTYPESinterval_to_asc() needs the most space at ~90 bytes.
 */
#define MAXDATELEN		128
/* maximum possible number of fields in a date string */
#define MAXDATEFIELDS	25
/* only this many chars are stored in datetktbl */
#define TOKMAXLEN		10

/* keep this struct small; it gets used a lot */
typedef struct
{
	char		token[TOKMAXLEN + 1];	/* always NUL-terminated */
	char		type;			/* see field type codes above */
	int32		value;			/* meaning depends on type */
} datetkn;


/* FMODULO()
 * Macro to replace modf(), which is broken on some platforms.
 * t = input and remainder
 * q = integer part
 * u = divisor
 */
#define FMODULO(t,q,u) \
do { \
	(q) = (((t) < 0) ? ceil((t) / (u)): floor((t) / (u))); \
	if ((q) != 0) (t) -= rint((q) * (u)); \
} while(0)

/* TMODULO()
 * Like FMODULO(), but work on the timestamp datatype (now always int64).
 * We assume that int64 follows the C99 semantics for division (negative
 * quotients truncate towards zero).
 */
#define TMODULO(t,q,u) \
do { \
	(q) = ((t) / (u)); \
	if ((q) != 0) (t) -= ((q) * (u)); \
} while(0)

/* in both timestamp.h and ecpg/dt.h */
#define DAYS_PER_YEAR	365.25	/* assumes leap year every four years */
#define MONTHS_PER_YEAR 12
/*
 *	DAYS_PER_MONTH is very imprecise.  The more accurate value is
 *	365.2425/12 = 30.436875, or '30 days 10:29:06'.  Right now we only
 *	return an integral number of days, but someday perhaps we should
 *	also return a 'time' value to be used as well.  ISO 8601 suggests
 *	30 days.
 */
#define DAYS_PER_MONTH	30		/* assumes exactly 30 days per month */
#define HOURS_PER_DAY	24		/* assume no daylight savings time changes */

/*
 *	This doesn't adjust for uneven daylight savings time intervals or leap
 *	seconds, and it crudely estimates leap years.  A more accurate value
 *	for days per years is 365.2422.
 */
#define SECS_PER_YEAR	(36525 * 864)	/* avoid floating-point computation */
#define SECS_PER_DAY	86400
#define SECS_PER_HOUR	3600
#define SECS_PER_MINUTE 60
#define MINS_PER_HOUR	60

#define USECS_PER_DAY	INT64CONST(86400000000)
#define USECS_PER_HOUR	INT64CONST(3600000000)
#define USECS_PER_MINUTE INT64CONST(60000000)
#define USECS_PER_SEC	INT64CONST(1000000)

/*
 * Date/time validation
 * Include check for leap year.
 */
#define isleap(y) (((y) % 4) == 0 && (((y) % 100) != 0 || ((y) % 400) == 0))

/*
 * Julian date support --- see comments in backend's timestamp.h.
 */

#define JULIAN_MINYEAR (-4713)
#define JULIAN_MINMONTH (11)
#define JULIAN_MINDAY (24)
#define JULIAN_MAXYEAR (5874898)
#define JULIAN_MAXMONTH (6)
#define JULIAN_MAXDAY (3)

#define IS_VALID_JULIAN(y,m,d) \
	(((y) > JULIAN_MINYEAR || \
	  ((y) == JULIAN_MINYEAR && ((m) >= JULIAN_MINMONTH))) && \
	 ((y) < JULIAN_MAXYEAR || \
	  ((y) == JULIAN_MAXYEAR && ((m) < JULIAN_MAXMONTH))))

#define MIN_TIMESTAMP	INT64CONST(-211813488000000000)
#define END_TIMESTAMP	INT64CONST(9223371331200000000)

#define IS_VALID_TIMESTAMP(t)  (MIN_TIMESTAMP <= (t) && (t) < END_TIMESTAMP)

#define UTIME_MINYEAR (1901)
#define UTIME_MINMONTH (12)
#define UTIME_MINDAY (14)
#define UTIME_MAXYEAR (2038)
#define UTIME_MAXMONTH (01)
#define UTIME_MAXDAY (18)

#define IS_VALID_UTIME(y,m,d) ((((y) > UTIME_MINYEAR) \
 || (((y) == UTIME_MINYEAR) && (((m) > UTIME_MINMONTH) \
  || (((m) == UTIME_MINMONTH) && ((d) >= UTIME_MINDAY))))) \
 && (((y) < UTIME_MAXYEAR) \
 || (((y) == UTIME_MAXYEAR) && (((m) < UTIME_MAXMONTH) \
  || (((m) == UTIME_MAXMONTH) && ((d) <= UTIME_MAXDAY))))))

#define DT_NOBEGIN		(-INT64CONST(0x7fffffffffffffff) - 1)
#define DT_NOEND		(INT64CONST(0x7fffffffffffffff))

#define TIMESTAMP_NOBEGIN(j)	do {(j) = DT_NOBEGIN;} while (0)
#define TIMESTAMP_NOEND(j)			do {(j) = DT_NOEND;} while (0)
#define TIMESTAMP_IS_NOBEGIN(j) ((j) == DT_NOBEGIN)
#define TIMESTAMP_IS_NOEND(j)	((j) == DT_NOEND)
#define TIMESTAMP_NOT_FINITE(j) (TIMESTAMP_IS_NOBEGIN(j) || TIMESTAMP_IS_NOEND(j))

int			DecodeInterval(char **, int *, int, int *, struct tm *, fsec_t *);
int			DecodeTime(char *, int *, struct tm *, fsec_t *);
void		EncodeDateTime(struct tm *tm, fsec_t fsec, bool print_tz, int tz, const char *tzn, int style, char *str, bool EuroDates);
void		EncodeInterval(struct tm *tm, fsec_t fsec, int style, char *str);
int			tm2timestamp(struct tm *, fsec_t, int *, timestamp *);
int			DecodeUnits(int field, char *lowtoken, int *val);
bool		CheckDateTokenTables(void);
void		EncodeDateOnly(struct tm *tm, int style, char *str, bool EuroDates);
int			GetEpochTime(struct tm *);
int			ParseDateTime(char *, char *, char **, int *, int *, char **);
int			DecodeDateTime(char **, int *, int, int *, struct tm *, fsec_t *, bool);
void		j2date(int, int *, int *, int *);
void		GetCurrentDateTime(struct tm *);
int			date2j(int, int, int);
void		TrimTrailingZeros(char *);
void		dt2time(double, int *, int *, int *, fsec_t *);
int			PGTYPEStimestamp_defmt_scan(char **str, char *fmt, timestamp * d,
										int *year, int *month, int *day,
										int *hour, int *minute, int *second,
										int *tz);

extern char *pgtypes_date_weekdays_short[];
extern char *pgtypes_date_months[];
extern char *months[];
extern char *days[];
extern const int day_tab[2][13];

#endif							/* DT_H */

相关信息

greenplumn 源码目录

相关文章

greenplumn common 源码

greenplumn datetime 源码

greenplumn dt_common 源码

greenplumn interval 源码

greenplumn numeric 源码

greenplumn pgtypeslib_extern 源码

greenplumn timestamp 源码