greenplumn nodeIndexonlyscan 源码
greenplumn nodeIndexonlyscan 代码
文件路径：/src/backend/executor/nodeIndexonlyscan.c
/*-------------------------------------------------------------------------
*
* nodeIndexonlyscan.c
* Routines to support index-only scans
*
* Portions Copyright (c) 1996-2019, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
*
* IDENTIFICATION
* src/backend/executor/nodeIndexonlyscan.c
*
*-------------------------------------------------------------------------
*/
/*
* INTERFACE ROUTINES
* ExecIndexOnlyScan scans an index
* IndexOnlyNext retrieve next tuple
* ExecInitIndexOnlyScan creates and initializes state info.
* ExecReScanIndexOnlyScan rescans the indexed relation.
* ExecEndIndexOnlyScan releases all storage.
* ExecIndexOnlyMarkPos marks scan position.
* ExecIndexOnlyRestrPos restores scan position.
* ExecIndexOnlyScanEstimate estimates DSM space needed for
* parallel index-only scan
* ExecIndexOnlyScanInitializeDSM initialize DSM for parallel
* index-only scan
* ExecIndexOnlyScanReInitializeDSM reinitialize DSM for fresh scan
* ExecIndexOnlyScanInitializeWorker attach to DSM info in parallel worker
*/
#include "postgres.h"
#include "access/genam.h"
#include "access/relscan.h"
#include "access/tableam.h"
#include "access/tupdesc.h"
#include "access/visibilitymap.h"
#include "executor/execdebug.h"
#include "executor/nodeIndexonlyscan.h"
#include "executor/nodeIndexscan.h"
#include "miscadmin.h"
#include "storage/bufmgr.h"
#include "storage/predicate.h"
#include "utils/memutils.h"
#include "utils/rel.h"
static TupleTableSlot *IndexOnlyNext(IndexOnlyScanState *node);
static void StoreIndexTuple(TupleTableSlot *slot, IndexTuple itup,
TupleDesc itupdesc);
/* ----------------------------------------------------------------
* IndexOnlyNext
*
* Retrieve a tuple from the IndexOnlyScan node's index.
* ----------------------------------------------------------------
*/
static TupleTableSlot *
IndexOnlyNext(IndexOnlyScanState *node)
{
EState *estate;
ExprContext *econtext;
ScanDirection direction;
IndexScanDesc scandesc;
TupleTableSlot *slot;
ItemPointer tid;
/*
* extract necessary information from index scan node
*/
estate = node->ss.ps.state;
direction = estate->es_direction;
/* flip direction if this is an overall backward scan */
if (ScanDirectionIsBackward(((IndexOnlyScan *) node->ss.ps.plan)->indexorderdir))
{
if (ScanDirectionIsForward(direction))
direction = BackwardScanDirection;
else if (ScanDirectionIsBackward(direction))
direction = ForwardScanDirection;
}
scandesc = node->ioss_ScanDesc;
econtext = node->ss.ps.ps_ExprContext;
slot = node->ss.ss_ScanTupleSlot;
if (scandesc == NULL)
{
/*
* We reach here if the index only scan is not parallel, or if we're
* serially executing an index only scan that was planned to be
* parallel.
*/
scandesc = index_beginscan(node->ss.ss_currentRelation,
node->ioss_RelationDesc,
estate->es_snapshot,
node->ioss_NumScanKeys,
node->ioss_NumOrderByKeys);
node->ioss_ScanDesc = scandesc;
/* Set it up for index-only scan */
node->ioss_ScanDesc->xs_want_itup = true;
node->ioss_VMBuffer = InvalidBuffer;
/*
* If no run-time keys to calculate or they are ready, go ahead and
* pass the scankeys to the index AM.
*/
if (node->ioss_NumRuntimeKeys == 0 || node->ioss_RuntimeKeysReady)
index_rescan(scandesc,
node->ioss_ScanKeys,
node->ioss_NumScanKeys,
node->ioss_OrderByKeys,
node->ioss_NumOrderByKeys);
}
/*
* OK, now that we have what we need, fetch the next tuple.
*/
while ((tid = index_getnext_tid(scandesc, direction)) != NULL)
{
bool tuple_from_heap = false;
CHECK_FOR_INTERRUPTS();
/*
* We can skip the heap fetch if the TID references a heap page on
* which all tuples are known visible to everybody. In any case,
* we'll use the index tuple not the heap tuple as the data source.
*
* Note on Memory Ordering Effects: visibilitymap_get_status does not
* lock the visibility map buffer, and therefore the result we read
* here could be slightly stale. However, it can't be stale enough to
* matter.
*
* We need to detect clearing a VM bit due to an insert right away,
* because the tuple is present in the index page but not visible. The
* reading of the TID by this scan (using a shared lock on the index
* buffer) is serialized with the insert of the TID into the index
* (using an exclusive lock on the index buffer). Because the VM bit
* is cleared before updating the index, and locking/unlocking of the
* index page acts as a full memory barrier, we are sure to see the
* cleared bit if we see a recently-inserted TID.
*
* Deletes do not update the index page (only VACUUM will clear out
* the TID), so the clearing of the VM bit by a delete is not
* serialized with this test below, and we may see a value that is
* significantly stale. However, we don't care about the delete right
* away, because the tuple is still visible until the deleting
* transaction commits or the statement ends (if it's our
* transaction). In either case, the lock on the VM buffer will have
* been released (acting as a write barrier) after clearing the bit.
* And for us to have a snapshot that includes the deleting
* transaction (making the tuple invisible), we must have acquired
* ProcArrayLock after that time, acting as a read barrier.
*
* It's worth going through this complexity to avoid needing to lock
* the VM buffer, which could cause significant contention.
*/
if (!VM_ALL_VISIBLE(scandesc->heapRelation,
ItemPointerGetBlockNumber(tid),
&node->ioss_VMBuffer))
{
/*
* Rats, we have to visit the heap to check visibility.
*/
InstrCountTuples2(node, 1);
if (!index_fetch_heap(scandesc, node->ioss_TableSlot))
continue; /* no visible tuple, try next index entry */
ExecClearTuple(node->ioss_TableSlot);
/*
* Only MVCC snapshots are supported here, so there should be no
* need to keep following the HOT chain once a visible entry has
* been found. If we did want to allow that, we'd need to keep
* more state to remember not to call index_getnext_tid next time.
*/
if (scandesc->xs_heap_continue)
elog(ERROR, "non-MVCC snapshots are not supported in index-only scans");
/*
* Note: at this point we are holding a pin on the heap page, as
* recorded in scandesc->xs_cbuf. We could release that pin now,
* but it's not clear whether it's a win to do so. The next index
* entry might require a visit to the same heap page.
*/
tuple_from_heap = true;
}
/*
* Fill the scan tuple slot with data from the index. This might be
* provided in either HeapTuple or IndexTuple format. Conceivably an
* index AM might fill both fields, in which case we prefer the heap
* format, since it's probably a bit cheaper to fill a slot from.
*/
if (scandesc->xs_hitup)
{
/*
* We don't take the trouble to verify that the provided tuple has
* exactly the slot's format, but it seems worth doing a quick
* check on the number of fields.
*/
Assert(slot->tts_tupleDescriptor->natts ==
scandesc->xs_hitupdesc->natts);
ExecForceStoreHeapTuple(scandesc->xs_hitup, slot, false);
}
else if (scandesc->xs_itup)
StoreIndexTuple(slot, scandesc->xs_itup, scandesc->xs_itupdesc);
else
elog(ERROR, "no data returned for index-only scan");
/*
* If the index was lossy, we have to recheck the index quals.
* (Currently, this can never happen, but we should support the case
* for possible future use, eg with GiST indexes.)
*/
if (scandesc->xs_recheck)
{
econtext->ecxt_scantuple = slot;
if (!ExecQualAndReset(node->indexqual, econtext))
{
/* Fails recheck, so drop it and loop back for another */
InstrCountFiltered2(node, 1);
continue;
}
}
/*
* We don't currently support rechecking ORDER BY distances. (In
* principle, if the index can support retrieval of the originally
* indexed value, it should be able to produce an exact distance
* calculation too. So it's not clear that adding code here for
* recheck/re-sort would be worth the trouble. But we should at least
* throw an error if someone tries it.)
*/
if (scandesc->numberOfOrderBys > 0 && scandesc->xs_recheckorderby)
ereport(ERROR,
(errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
errmsg("lossy distance functions are not supported in index-only scans")));
/*
* If we didn't access the heap, then we'll need to take a predicate
* lock explicitly, as if we had. For now we do that at page level.
*/
if (!tuple_from_heap)
PredicateLockPage(scandesc->heapRelation,
ItemPointerGetBlockNumber(tid),
estate->es_snapshot);
return slot;
}
/*
* if we get here it means the index scan failed so we are at the end of
* the scan..
*/
return ExecClearTuple(slot);
}
/*
* StoreIndexTuple
* Fill the slot with data from the index tuple.
*
* At some point this might be generally-useful functionality, but
* right now we don't need it elsewhere.
*/
static void
StoreIndexTuple(TupleTableSlot *slot, IndexTuple itup, TupleDesc itupdesc)
{
/*
* Note: we must use the tupdesc supplied by the AM in index_deform_tuple,
* not the slot's tupdesc, in case the latter has different datatypes
* (this happens for btree name_ops in particular). They'd better have
* the same number of columns though, as well as being datatype-compatible
* which is something we can't so easily check.
*/
Assert(slot->tts_tupleDescriptor->natts == itupdesc->natts);
ExecClearTuple(slot);
index_deform_tuple(itup, itupdesc, slot->tts_values, slot->tts_isnull);
ExecStoreVirtualTuple(slot);
}
/*
* IndexOnlyRecheck -- access method routine to recheck a tuple in EvalPlanQual
*
* This can't really happen, since an index can't supply CTID which would
* be necessary data for any potential EvalPlanQual target relation. If it
* did happen, the EPQ code would pass us the wrong data, namely a heap
* tuple not an index tuple. So throw an error.
*/
static bool
IndexOnlyRecheck(IndexOnlyScanState *node, TupleTableSlot *slot)
{
elog(ERROR, "EvalPlanQual recheck is not supported in index-only scans");
return false; /* keep compiler quiet */
}
/* ----------------------------------------------------------------
* ExecIndexOnlyScan(node)
* ----------------------------------------------------------------
*/
static TupleTableSlot *
ExecIndexOnlyScan(PlanState *pstate)
{
IndexOnlyScanState *node = castNode(IndexOnlyScanState, pstate);
/*
* If we have runtime keys and they've not already been set up, do it now.
*/
if (node->ioss_NumRuntimeKeys != 0 && !node->ioss_RuntimeKeysReady)
ExecReScan((PlanState *) node);
return ExecScan(&node->ss,
(ExecScanAccessMtd) IndexOnlyNext,
(ExecScanRecheckMtd) IndexOnlyRecheck);
}
/* ----------------------------------------------------------------
* ExecReScanIndexOnlyScan(node)
*
* Recalculates the values of any scan keys whose value depends on
* information known at runtime, then rescans the indexed relation.
*
* Updating the scan key was formerly done separately in
* ExecUpdateIndexScanKeys. Integrating it into ReScan makes
* rescans of indices and relations/general streams more uniform.
* ----------------------------------------------------------------
*/
void
ExecReScanIndexOnlyScan(IndexOnlyScanState *node)
{
/*
* If we are doing runtime key calculations (ie, any of the index key
* values weren't simple Consts), compute the new key values. But first,
* reset the context so we don't leak memory as each outer tuple is
* scanned. Note this assumes that we will recalculate *all* runtime keys
* on each call.
*/
if (node->ioss_NumRuntimeKeys != 0)
{
ExprContext *econtext = node->ioss_RuntimeContext;
ResetExprContext(econtext);
ExecIndexEvalRuntimeKeys(econtext,
node->ioss_RuntimeKeys,
node->ioss_NumRuntimeKeys);
}
node->ioss_RuntimeKeysReady = true;
/* reset index scan */
if (node->ioss_ScanDesc)
index_rescan(node->ioss_ScanDesc,
node->ioss_ScanKeys, node->ioss_NumScanKeys,
node->ioss_OrderByKeys, node->ioss_NumOrderByKeys);
ExecScanReScan(&node->ss);
}
/* ----------------------------------------------------------------
* ExecEndIndexOnlyScan
* ----------------------------------------------------------------
*/
void
ExecEndIndexOnlyScan(IndexOnlyScanState *node)
{
Relation indexRelationDesc;
IndexScanDesc indexScanDesc;
/*
* extract information from the node
*/
indexRelationDesc = node->ioss_RelationDesc;
indexScanDesc = node->ioss_ScanDesc;
/* Release VM buffer pin, if any. */
if (node->ioss_VMBuffer != InvalidBuffer)
{
ReleaseBuffer(node->ioss_VMBuffer);
node->ioss_VMBuffer = InvalidBuffer;
}
/*
* Free the exprcontext(s) ... now dead code, see ExecFreeExprContext
*/
#ifdef NOT_USED
ExecFreeExprContext(&node->ss.ps);
if (node->ioss_RuntimeContext)
FreeExprContext(node->ioss_RuntimeContext, true);
#endif
/*
* clear out tuple table slots
*/
if (node->ss.ps.ps_ResultTupleSlot)
ExecClearTuple(node->ss.ps.ps_ResultTupleSlot);
ExecClearTuple(node->ss.ss_ScanTupleSlot);
/*
* close the index relation (no-op if we didn't open it)
*/
if (indexScanDesc)
index_endscan(indexScanDesc);
if (indexRelationDesc)
index_close(indexRelationDesc, NoLock);
}
/* ----------------------------------------------------------------
* ExecIndexOnlyMarkPos
*
* Note: we assume that no caller attempts to set a mark before having read
* at least one tuple. Otherwise, ioss_ScanDesc might still be NULL.
* ----------------------------------------------------------------
*/
void
ExecIndexOnlyMarkPos(IndexOnlyScanState *node)
{
EState *estate = node->ss.ps.state;
if (estate->es_epqTupleSlot != NULL)
{
/*
* We are inside an EvalPlanQual recheck. If a test tuple exists for
* this relation, then we shouldn't access the index at all. We would
* instead need to save, and later restore, the state of the
* es_epqScanDone flag, so that re-fetching the test tuple is
* possible. However, given the assumption that no caller sets a mark
* at the start of the scan, we can only get here with es_epqScanDone
* already set, and so no state need be saved.
*/
Index scanrelid = ((Scan *) node->ss.ps.plan)->scanrelid;
Assert(scanrelid > 0);
if (estate->es_epqTupleSlot[scanrelid - 1] != NULL)
{
/* Verify the claim above */
if (!estate->es_epqScanDone[scanrelid - 1])
elog(ERROR, "unexpected ExecIndexOnlyMarkPos call in EPQ recheck");
return;
}
}
index_markpos(node->ioss_ScanDesc);
}
/* ----------------------------------------------------------------
* ExecIndexOnlyRestrPos
* ----------------------------------------------------------------
*/
void
ExecIndexOnlyRestrPos(IndexOnlyScanState *node)
{
EState *estate = node->ss.ps.state;
if (estate->es_epqTupleSlot != NULL)
{
/* See comments in ExecIndexOnlyMarkPos */
Index scanrelid = ((Scan *) node->ss.ps.plan)->scanrelid;
Assert(scanrelid > 0);
if (estate->es_epqTupleSlot[scanrelid - 1])
{
/* Verify the claim above */
if (!estate->es_epqScanDone[scanrelid - 1])
elog(ERROR, "unexpected ExecIndexOnlyRestrPos call in EPQ recheck");
return;
}
}
index_restrpos(node->ioss_ScanDesc);
}
/* ----------------------------------------------------------------
* ExecInitIndexOnlyScan
*
* Initializes the index scan's state information, creates
* scan keys, and opens the base and index relations.
*
* Note: index scans have 2 sets of state information because
* we have to keep track of the base relation and the
* index relation.
* ----------------------------------------------------------------
*/
IndexOnlyScanState *
ExecInitIndexOnlyScan(IndexOnlyScan *node, EState *estate, int eflags)
{
IndexOnlyScanState *indexstate;
Relation currentRelation;
LOCKMODE lockmode;
TupleDesc tupDesc;
/*
* create state structure
*/
indexstate = makeNode(IndexOnlyScanState);
indexstate->ss.ps.plan = (Plan *) node;
indexstate->ss.ps.state = estate;
indexstate->ss.ps.ExecProcNode = ExecIndexOnlyScan;
/*
* Miscellaneous initialization
*
* create expression context for node
*/
ExecAssignExprContext(estate, &indexstate->ss.ps);
/*
* open the scan relation
*/
currentRelation = ExecOpenScanRelation(estate, node->scan.scanrelid, eflags);
indexstate->ss.ss_currentRelation = currentRelation;
indexstate->ss.ss_currentScanDesc = NULL; /* no heap scan here */
/*
* Build the scan tuple type using the indextlist generated by the
* planner. We use this, rather than the index's physical tuple
* descriptor, because the latter contains storage column types not the
* types of the original datums. (It's the AM's responsibility to return
* suitable data anyway.)
*/
tupDesc = ExecTypeFromTL(node->indextlist);
ExecInitScanTupleSlot(estate, &indexstate->ss, tupDesc,
&TTSOpsVirtual);
/*
* We need another slot, in a format that's suitable for the table AM, for
* when we need to fetch a tuple from the table for rechecking visibility.
*/
indexstate->ioss_TableSlot =
ExecAllocTableSlot(&estate->es_tupleTable,
RelationGetDescr(currentRelation),
table_slot_callbacks(currentRelation));
/*
* Initialize result type and projection info. The node's targetlist will
* contain Vars with varno = INDEX_VAR, referencing the scan tuple.
*/
ExecInitResultTypeTL(&indexstate->ss.ps);
ExecAssignScanProjectionInfoWithVarno(&indexstate->ss, INDEX_VAR);
/*
* initialize child expressions
*
* Note: we don't initialize all of the indexorderby expression, only the
* sub-parts corresponding to runtime keys (see below).
*/
indexstate->ss.ps.qual =
ExecInitQual(node->scan.plan.qual, (PlanState *) indexstate);
indexstate->indexqual =
ExecInitQual(node->indexqual, (PlanState *) indexstate);
/*
* If we are just doing EXPLAIN (ie, aren't going to run the plan), stop
* here. This allows an index-advisor plugin to EXPLAIN a plan containing
* references to nonexistent indexes.
*/
if (eflags & EXEC_FLAG_EXPLAIN_ONLY)
return indexstate;
/* Open the index relation. */
lockmode = exec_rt_fetch(node->scan.scanrelid, estate)->rellockmode;
indexstate->ioss_RelationDesc = index_open(node->indexid, lockmode);
/*
* Initialize index-specific scan state
*/
indexstate->ioss_RuntimeKeysReady = false;
indexstate->ioss_RuntimeKeys = NULL;
indexstate->ioss_NumRuntimeKeys = 0;
/*
* build the index scan keys from the index qualification
*/
ExecIndexBuildScanKeys((PlanState *) indexstate,
indexstate->ioss_RelationDesc,
node->indexqual,
false,
&indexstate->ioss_ScanKeys,
&indexstate->ioss_NumScanKeys,
&indexstate->ioss_RuntimeKeys,
&indexstate->ioss_NumRuntimeKeys,
NULL, /* no ArrayKeys */
NULL);
/*
* any ORDER BY exprs have to be turned into scankeys in the same way
*/
ExecIndexBuildScanKeys((PlanState *) indexstate,
indexstate->ioss_RelationDesc,
node->indexorderby,
true,
&indexstate->ioss_OrderByKeys,
&indexstate->ioss_NumOrderByKeys,
&indexstate->ioss_RuntimeKeys,
&indexstate->ioss_NumRuntimeKeys,
NULL, /* no ArrayKeys */
NULL);
/*
* If we have runtime keys, we need an ExprContext to evaluate them. The
* node's standard context won't do because we want to reset that context
* for every tuple. So, build another context just like the other one...
* -tgl 7/11/00
*/
if (indexstate->ioss_NumRuntimeKeys != 0)
{
ExprContext *stdecontext = indexstate->ss.ps.ps_ExprContext;
ExecAssignExprContext(estate, &indexstate->ss.ps);
indexstate->ioss_RuntimeContext = indexstate->ss.ps.ps_ExprContext;
indexstate->ss.ps.ps_ExprContext = stdecontext;
}
else
{
indexstate->ioss_RuntimeContext = NULL;
}
/*
* all done.
*/
return indexstate;
}
/* ----------------------------------------------------------------
* Parallel Index-only Scan Support
* ----------------------------------------------------------------
*/
/* ----------------------------------------------------------------
* ExecIndexOnlyScanEstimate
*
* Compute the amount of space we'll need in the parallel
* query DSM, and inform pcxt->estimator about our needs.
* ----------------------------------------------------------------
*/
void
ExecIndexOnlyScanEstimate(IndexOnlyScanState *node,
ParallelContext *pcxt)
{
EState *estate = node->ss.ps.state;
node->ioss_PscanLen = index_parallelscan_estimate(node->ioss_RelationDesc,
estate->es_snapshot);
shm_toc_estimate_chunk(&pcxt->estimator, node->ioss_PscanLen);
shm_toc_estimate_keys(&pcxt->estimator, 1);
}
/* ----------------------------------------------------------------
* ExecIndexOnlyScanInitializeDSM
*
* Set up a parallel index-only scan descriptor.
* ----------------------------------------------------------------
*/
void
ExecIndexOnlyScanInitializeDSM(IndexOnlyScanState *node,
ParallelContext *pcxt)
{
EState *estate = node->ss.ps.state;
ParallelIndexScanDesc piscan;
piscan = shm_toc_allocate(pcxt->toc, node->ioss_PscanLen);
index_parallelscan_initialize(node->ss.ss_currentRelation,
node->ioss_RelationDesc,
estate->es_snapshot,
piscan);
shm_toc_insert(pcxt->toc, node->ss.ps.plan->plan_node_id, piscan);
node->ioss_ScanDesc =
index_beginscan_parallel(node->ss.ss_currentRelation,
node->ioss_RelationDesc,
node->ioss_NumScanKeys,
node->ioss_NumOrderByKeys,
piscan);
node->ioss_ScanDesc->xs_want_itup = true;
node->ioss_VMBuffer = InvalidBuffer;
/*
* If no run-time keys to calculate or they are ready, go ahead and pass
* the scankeys to the index AM.
*/
if (node->ioss_NumRuntimeKeys == 0 || node->ioss_RuntimeKeysReady)
index_rescan(node->ioss_ScanDesc,
node->ioss_ScanKeys, node->ioss_NumScanKeys,
node->ioss_OrderByKeys, node->ioss_NumOrderByKeys);
}
/* ----------------------------------------------------------------
* ExecIndexOnlyScanReInitializeDSM
*
* Reset shared state before beginning a fresh scan.
* ----------------------------------------------------------------
*/
void
ExecIndexOnlyScanReInitializeDSM(IndexOnlyScanState *node,
ParallelContext *pcxt)
{
index_parallelrescan(node->ioss_ScanDesc);
}
/* ----------------------------------------------------------------
* ExecIndexOnlyScanInitializeWorker
*
* Copy relevant information from TOC into planstate.
* ----------------------------------------------------------------
*/
void
ExecIndexOnlyScanInitializeWorker(IndexOnlyScanState *node,
ParallelWorkerContext *pwcxt)
{
ParallelIndexScanDesc piscan;
piscan = shm_toc_lookup(pwcxt->toc, node->ss.ps.plan->plan_node_id, false);
node->ioss_ScanDesc =
index_beginscan_parallel(node->ss.ss_currentRelation,
node->ioss_RelationDesc,
node->ioss_NumScanKeys,
node->ioss_NumOrderByKeys,
piscan);
node->ioss_ScanDesc->xs_want_itup = true;
/*
* If no run-time keys to calculate or they are ready, go ahead and pass
* the scankeys to the index AM.
*/
if (node->ioss_NumRuntimeKeys == 0 || node->ioss_RuntimeKeysReady)
index_rescan(node->ioss_ScanDesc,
node->ioss_ScanKeys, node->ioss_NumScanKeys,
node->ioss_OrderByKeys, node->ioss_NumOrderByKeys);
}
相关信息
相关文章
0
赞
热门推荐
-
2、 - 优质文章
-
3、 gate.io
-
6、 golang
-
7、 openharmony